Jump to content

Shake or Vibration Issues

Silver space ship
 Share

Recommended Posts

mzodarg Senior Enthusiast

mzodarg

Posted
Posted

biggspell you make no sense.

Totally agree with the above. So what your telling the forum is that your dealer is the consumate road force tire balancer and if they aren't, you refuse to take it elsewhere to check the balance since it's under warranty.

 

I've heard it all now!

 

Mike

  • Replies 12.9k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

csckickass
csckickass

Well folks, I did it. After all the failed attempts at the Chevy dealer I traded it in for a 2015 Ram 1500 Larame. I have to agree with the other folks on here that have done the same thing, it was th

mafd2
mafd2

Apparently you and the other customer reps don't care. If you or GM would care y'all would put more effort in the matter. Just coming on the forum and stating the same repetitive posts and being a 3

DALaws
DALaws

Well I have some good news and bad news about my truck vibrations. Good news is that my truck has a significantly less vibration at speed. The bad news is my truck has significantly less vibration. Fo

Posted Images

mawint Enthusiast

mawint

Posted
Posted

I think he is saying the dealer should be competent enough to balance a tire.

 

Strangely enough though, it seems they aren't. Last time I had tire issues I brought it to the dealer to fix (had a slow leak) and they never repaired it. Just kept telling me there was no leaks by doing a dunk test. Brought it somewhere else to have the tire remounted and sealed, never leaked again.

BringTheRain403 Senior Enthusiast

BringTheRain403

Posted
Posted

I'm sorry but of I was having an issue with truck and solution was to go to a tire shop for a second opinion I'd friggin go. He's just being stubborn...

 

Sent from my SCH-I535 using Tapatalk 2

 

 

biggspell Enthusiast

biggspell

Posted
Posted

Believe it or not I have a great dealer whose service manager / department, owner are second to none. They are working with me to get this issue resolved and at the same time we are building a case. I'm not going anywhere else and drop additional coin at this point. I'm not posting here to argue with anyone I have better things to do. By the way, the service manager informed me that the GM Technical guy has been hearing of these issues and a bulletin should be coming out shortly. The Tech. said they have been replacing the drive shafts for the cure. The service manager has ordered one including the yoke and this will be overnighted to him. Hope this works..

BringTheRain403 Senior Enthusiast

BringTheRain403

Posted
Posted (edited)

As long as you're happy with how they're handling it. But just know this...90% of the guys out they balancing tires have absolutely clue what they are doing... Sent from my SCH-I535 using Tapatalk 2

Edited by BringTheRain403
Ericbarber New Member

Ericbarber

Posted
Posted

Made an appointment with service today, They said it is normal to do this. Something to do with the active fuel management on the v8. But I have a v6 in base model when I told him this he was kind of dumbfounded as he didn't think my truck had the cylinder deactivation. We will see what they have to say when I bring it in thursday

quickvert1 Enthusiast

quickvert1

Posted
Posted (edited)

Took for long ride today no vibration or shake...

 

Tire issues usually dont shake at 45 mph..mine used to shake at 65-80 mph

Edited by quickvert1
'01LS1 Senior Enthusiast

'01LS1

Posted
Posted

Made an appointment with service today, They said it is normal to do this. Something to do with the active fuel management on the v8. But I have a v6 in base model when I told him this he was kind of dumbfounded as he didn't think my truck had the cylinder deactivation. We will see what they have to say when I bring it in thursday

 

Yes it does... http://media.gm.com/content/media/us/en/chevrolet/news.detail.html/content/Pages/news/us/en/2013/Jun/0619-silverado-v6-fe.html

Arnoldthepig Enthusiast

Arnoldthepig

Posted
Posted

Update: The truck is back at the dealer as of this morning, i'm still chasing the vibration issue. I was told they are putting on a vibration analyzer to see what is vibrating at speeds above 70mph. I was also told by the service manager that there was a case at another dealership in south jersey where switching to Michelins cured the high speed vibrations on a 2014. I currently have the oem Goodyear LS-2's on the oem 20" wheels, the truck now has 2900 miles on the clock. I also asked the dealer to look into the high pitched squeel coming from the 4wd switch when the truck is put into auto or 4wd. I will report back with updates as always once I get the truck back. After reading this forum, does it seem that most with vibration issues live in the Northeast?

BringTheRain403 Senior Enthusiast

BringTheRain403

Posted
Posted

Tell them you want them to swap out to the Michelin's strait up. Regardless of whether it's the tires or not the Goodyear's are junk

 

Sent from my SCH-I535 using Tapatalk 2

 

 

Arnoldthepig Enthusiast

Arnoldthepig

Posted
Posted

Im not going to get too excited about the tire swap yet, but it seems that the dealer has found the same thing that I found in regard to the actual RPM where this truck is vibrating. I didn't have time to type all this earlier in my previous update...

 

I used to work for a major yacht builder that used meters for vibration analysis so I got to thinking... A quick internet search and I found an Iphone App called "vibration". The app did cost me $4.99 but at this point I think its worth it. I started the app, ran the truck to 75MPH and took a 40 second reading while holding the speed constant at 75MPH with cruise control. (I did this prior to taking the truck into the dealer today.) The app will output in HZ or RPM whichever you choose. I found the highest spike at around 800 RPM at 75 MPH as you can see in the photo. There are (2) other high spikes in the photo, (1) around 1600 RPM (Engine) another around 2400 RPM (Driveshaft) After some quick math I determined that the 800 RPM vibration is wheel / tire / axle speed related and the most pronounced.

 

I was skeptical at first, however after using this app, I found out that it is actually VERY sensitive to even the smallest vibration. And no, this isn't an infommercial for the vibration app. It is just something that I found, used and passed along in hopes of helping others in the group as I know first hand how frustrating this issue is...I am supposed to pick up the truck tomorrow with the michelins...we shall see if its fixed...if anyone does download the app and can't figure it out pm me...its more intimidating than it looks....my only advice would be to take the longest data reading of 40 seconds as its easier on the eyes to read. Also hold your speed at a constant once you get your vehicle up to the speed where the vibration is felt, then start your data recording...

 

If nothing else this bit of information may be able to point you in the right direction...

post-125975-0-18851200-1389050511_thumb.jpg

post-125975-0-18851200-1389050511_thumb.jpg

post-125975-0-18851200-1389050511_thumb.jpg

post-125975-0-18851200-1389050511_thumb.jpg

svtkidd23 Enthusiast

svtkidd23

Posted
Posted

I used a mills vibration meter on my steering wheel.. Getting 3.8mills

 

Sent from my HTC6500LVW using Tapatalk

 

 

svtkidd23 Enthusiast

svtkidd23

Posted
Posted

2 hz @65 mph..

Can't get to 75 this am

yvu5e8er.jpg

At 50 its less than 1.0hz

 

Sent from my HTC6500LVW using Tapatalk

 

 

Arnoldthepig Enthusiast

Arnoldthepig

Posted
Posted

Svtkidd...by the looks of that graph you were taking a measurement while getting the truck up to 65mph. The key for vibration analysis is to hold a constant speed and then take the reading. I see on the graph you have a lot going on in the 3500-5000 rpm range...someone correct me if i'm wrong but the only thing on the truck spinning that fast would be the motor...unless u were doing somewhere around 160 mph then maybe a driveshaft...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • tararebecca
      2027 GMC Sierra: Official Discussion

      By tararebecca · Posted

      I agree, simplicity and reliability matter more as vehicles get more complicated. A V8 work truck option with fewer electronic features and a stronger warranty would definitely appeal to a lot of buyers who use their trucks for real work. Customizing it with trusted outfitters is often the best way to get exactly what you need
    • artistemorbidity
      2026 Sierra 1500 Denali - Sound upgrade?

      By artistemorbidity · Posted

      I’ve heard similar complaints from newer vehicles where the factory “premium” systems don’t always live up to expectations. A good installer should be able to improve the sound without turning it into a bass-heavy setup. I’d look into upgrading the front speakers, adding a quality DSP amplifier, and possibly improving sound deadening first—those changes usually make a much bigger difference than just adding a subwoofer. Hopefully someone local can recommend a reputable installer in the Las Vegas/St. George area.
    • Grumpy Bear
      The Peckish Synapse

      By Grumpy Bear · Posted

      Do you remember that Harley Davidson was more successful (solvent) when it produced about 60% of the market demand (by design) and forced wait times of up to three years? Even when your turn came around it was, "Take what we are giving you or move to the back of the line and start over". HUGE markup's were 'normalized' and dealer killed. 40% markup and no floor plan? What's not to love? Greed will kill them yet. They have surplus production and customer base is tanking. And still they think nosebleed pricing will work.  
    • newdude
      Me too……..

      By newdude · Posted

      The engine was done as part of the 6.2 recall?   You'd have to see if your VIN also has the 6.2 engine special coverage on it.  Coverage number is N252494003.  If you have this, your engine is covered under this and NOT the GM replacement part engine warranty which is 3yr/100k from the date of install.  The 3yr/100k mi warranty is in effect for non warranty purchases.     This is not any different if it was replaced under warranty without a recall or special coverage.  So if you had a 5.3 and it popped at 3 years in at 50,000mi during the 5yr/60k powertrain, the replacement engine would not get the 3yr/100k, and instead gets the remainder of the 5yr/60k as coverage.     So N252494003 gives 10 years or 150,000mi of coverage, which ever comes first, starting at the vehicle in service date.  So if your in service date is 01/01/2022, N252494003 gives you special coverage of the engine until 01/01/2032 or 150,000mi, whichever comes first.  So if your start date was 01/01/2022, you'd have left 5 years and 4 months (lets round to august 1st), or 62,000mi left of coverage.   So you need to know your in service date to know how much coverage is left.  
    • CamGTP
      Injector update

      By CamGTP · Posted

      Okiee dokie there bud, way to take things to the extreme.   I guess you missed the whole point and take things way to serious. I installed different EV6 style injectors that just so happen to be larger in my car running the same LQ4 engine and with a better spray pattern than the stock style injectors and I noticed no difference in the idle quality. Kinda was my round about way of saying that even if you put the same size but better style injectors in your truck, you will likely see the same thing.    I'm sure you're great to have conversations with in person if that's how you act through a keyboard. One little things sets you off and now I guess my dick is all up in your face.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...