Jump to content

Recommended Posts

Posted

My new truck excitement quickly wore off, apparently like the frame coating on my 2014 Sierra. Came off the lot sat, it's got 200 miles on it today, and this is what I found in 2 minutes of looking can't wait to see what's under there when I really look. I'll talk to the dealer tomorrow, and see what they say, I'll assume the'll says it's normal. The next question is how hard do I push? For TSB repair, or take back the truck.

50D777B6-8B30-4BD7-9DFB-21E5EB0BE28E_zps

026233C1-C7E5-46FB-AA3A-60B261483D5C_zps

Posted

My new truck excitement quickly wore off, apparently like the frame coating on my 2014 Sierra. Came off the lot sat, it's got 200 miles on it today, and this is what I found in 2 minutes of looking can't wait to see what's under there when I really look. I'll talk to the dealer tomorrow, and see what they say, I'll assume the'll says it's normal. The next question is how hard do I push? For TSB repair, or take back the truck.

50D777B6-8B30-4BD7-9DFB-21E5EB0BE28E_zps

026233C1-C7E5-46FB-AA3A-60B261483D5C_zps

Never in salt? That's bad .. I'm sorry to hear
Posted

I searched and didn't see this referenced. There is a new TSB concerning frame rust like I'm showing. I got this I from a friend that's a gm mechanic.

 

14002A: Service Update for Inventory and Customer Vehicles - Underbody Appearance - Expires with Base Warranty - (Feb 10, 2014)

 

This bulletin provides a service procedure to inspect and, if necessary, repair the appearance of underbody components on certain 2014 model year Chevrolet Silverado 1500 and GMC Sierra 1500 vehicles that may not meet GM appearance requirements for new vehicles. These vehicles may exhibit signs of premature surface degradation on certain underbody components.

This service procedure should be completed as soon as possible on involved vehicles currently in dealer inventory and customer vehicles that return to the dealer for any type of service during the New Vehicle Limited Warranty coverage period

Vehicles Involved

All involved vehicles are identified by VIN in the Global Warranty Management System – Investigate Vehicle History Application. Dealership technicians should always check this site to confirm vehicle involvement prior to beginning any required inspections and/or repairs. It is important to routinely use this tool to verify eligibility because not all similar vehicles may be involved regardless of description or option content.

Additionally, a list of involved vehicles currently in dealer inventory is available on the “Service Update Bulletin Information” link under the “Service” tab in GM GlobalConnect. Customer vehicles that return for service, for any reason, and are still covered under the vehicle's base warranty should also be checked for vehicle eligibility.

Posted (edited)

Just noticed this on mine too, going to make an appointment right away...

Edited by Northward Bound
Posted

Called the dealer yesterday about seeing rust on my frame and told him about the bulletin. He said he'd look into it and would call me back. An hour later he called and said he has just ordered the items needed to correct the problem and will call when it's in.. Seems like they going to spray some coating on the rust areas. Will update when the truck goes in..

Posted

Dealer called and said the items were "in" to do the rust bulletin and it goes in Tuesday for the repair. They say they'll have another truck there for me to drive when it goes in.. I'm a little nervous since they said my truck is the first one they've ever done, yikes!!!

 

I plan on taking a bunch of "before and after" pictures to see if they do a good job and to see if they scratch or dent the paint.

 

Anyone else have this rust bulletin done on theirs? How long does it really take?

 

I'll update when its done..

Posted

I'm in the same boat with the rust on my frame I brought the truck into the dealership and they said they're going to use a product called kryptonite has anybody heard of this is this what they've been using? He told me it's very expensive and has a very short shelf life..

 

 

Sent from my iPad using Tapatalk

Posted

Got the truck back today and it looks great, the guy who did it said GM sent 2 separate products and both had to be applied.. They had the truck for just a day. Once the rain stops later I'll get under and post the before and after photos..

Posted

See if you can find out which two products they used.

 

 

Sent from my iPad using Tapatalk

Posted

Got the truck back today and it looks great, the guy who did it said GM sent 2 separate products and both had to be applied.. They had the truck for just a day. Once the rain stops later I'll get under and post the before and after photos..

Now you can enjoy your 45k truck!
Posted

Sorry for the delay, been crazy busy prepping for an Algonquin canoe trip. Ok, here are a couple before and after photo's...

 

The stuff they used was called

 

Lloyd’s Pure Prep™ Metal Surface Preparation P/N 25418

Lloyds Kryptonite Metal Treatment P/N 36502 Life Long Rust Protection

 

post-75706-0-46095800-1402702467_thumb.jpgpost-75706-0-09103700-1402702602_thumb.jpgpost-75706-0-58488500-1402702780_thumb.jpegpost-75706-0-86496300-1402702837_thumb.jpg

post-75706-0-46095800-1402702467_thumb.jpg

post-75706-0-09103700-1402702602_thumb.jpg

post-75706-0-58488500-1402702780_thumb.jpeg

post-75706-0-86496300-1402702837_thumb.jpg

post-75706-0-46095800-1402702467_thumb.jpg

post-75706-0-09103700-1402702602_thumb.jpg

post-75706-0-58488500-1402702780_thumb.jpeg

post-75706-0-86496300-1402702837_thumb.jpg

post-75706-0-46095800-1402702467_thumb.jpg

post-75706-0-09103700-1402702602_thumb.jpg

post-75706-0-58488500-1402702780_thumb.jpeg

post-75706-0-86496300-1402702837_thumb.jpg

Posted (edited)

I'm in the same boat with the rust on my frame I brought the truck into the dealership and they said they're going to use a product called kryptonite has anybody heard of this is this what they've been using? He told me it's very expensive and has a very short shelf life..

 

 

Sent from my iPad using Tapatalk

LOL

 

http://en.wikipedia.org/wiki/Kryptonite

 

Actually, for this application it is a type of coating. See the Kryptonite thread oin this section.

Edited by pm26
Posted

You're of great help

 

 

Sent from my iPhone using Tapatalk

  • 2 months later...
Posted

Glad to hear I'm not the only one having this problem - I'll be bringing mine in next week to have this done. Such a shame

Posted

post-133018-140810307899_thumb.jpg

 

This is just one of many spots on my new 2014, has 1000 miles on it. Not even been driven in the rain yet. Will the TSB that's been mentioned take care of this? Do I need to get it to a dealer or call GM?

post-133018-140810307899_thumb.jpg

post-133018-140810307899_thumb.jpg

post-133018-140810307899_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I apologize for long post put going to try to explain everything. Parts replaced so far: Cam sensor Crank sensor Cam phaser valve Cam phaser solenoid Fuel pump Maf 1 injector Pcm Pdm   So about 2 weeks ago coming off the highway my 2007 yukon xl with the 6.2 stalled and would restart. Had unit towed back to house and I messed around with relays and unit started. Drove it the next day and same thing. Had it towed again. Scanned unit and had code p0300 with misfire data showing mainly cylinder 7 but I know that won't cause a no start. Measure fuel pressure and found only 42 psi replaced pump to have unit stall again and not restart. This time I stayed on back roads and just waited for it to restart about 30 to 60 min. During this time I found I have no injector pulse but have good power at injectors. Started unplugging 1 injector at a time and found when unplugging cylinder 7 pulse came back so i changed injecto and same issue. Turns out unit just happen to ready to start at that time. Scanned into unit and found no reason for the pcm to take away injector pulse so I replaced the pcm and same issue. I figured timing sesnor controlled the injector pulse so I replaced both sensors and while I had the water pump of i replaced the vvt components while i was in there. Read multiple people have luck chaging the maf for this issue so I changed it. Unit still stalls to this day and loses injector pulse on the ground side when it does. Have noticed watching the live data the pcm is request injectors to fire via injector pwm value. I have redone the ground wires at the left bottom of the block knowing this was the ground location for the pcm but still no luck. I am a mechanic by trade but this is having me pull my hair out. If anyone has something to have me check I will gladly im not much of a parts thrower but im about to load the cannon
    • Actually.  Wait.   I just re-read your original post.  Are you talking from INSIDE the truck you have to hit unlock?  Or from the key fob?  I had assumed from the key fob.   IF you are talking the inside unlock button, I assume you are shifting to park and its not unlocking the doors?  If so, that is changed via the settings page in the radio.  Go to SETTINGS, then VEHICLE and then it should be under LOCKS or DOOR LOCKS or something like that.  
    • Just pull the inside door handle.  It has mechanical override to the lock.  
    • Got to have those sliding doors. One of my favorite things about a minivan. The Kia does a good job of making a minivan look like an SUV. I may do a Toyota next. I want the awd option.
    • I took my 24 Sierra Denali 4wd in at 37,000 miles. Had the mileage maintenance checks done, asked them to change out the two limited slip differentials, including the limited slip additive, and change out the transfer case fluid. They rotated my tires, verified my shocks weren’t leaking, and whatever minor checkouts that were on the list for 37,000 miles. About three hours later, they charged me $600 and sent me off. I was considering having the 10-speed transmission serviced, but between the posts on this forum and previous experiences with transmission failures after a fluid and filter change, I decided against the tranny fluid changeout when the service advisor told me it would take about 3 hours and cost about $500. After growing up working in three different full-service gas stations, I know to stay far away from flushing machines connected to any automatic transmission. I don’t meet the severe duty schedule, but I may follow the 45,000 mile tranny service, unless  i see more problems from doing so on the forums. I expect I will want to watch the entire procedure. The various utube videos do a decent job of showing how much time and attention should be taken for a correct fluid &filter replacement, so witnessing the procedure seems something I should do. Trust but Verify🥳 Otherwise, I’ll follow the owner’s manual recommendations, whatever they are.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...