Jump to content

Recommended Posts

Posted
57 minutes ago, RACERX7775 said:

10:43 am, unlocked truck after sitting locked for 45 mins.  Started engine. Boots up and works as normal.  I cycled through some of the sources,  it works fine now except for ok google..  My bet is its gonna happen again. Lol.

It may. I've seen it a few times on various vehicles but I've never seen one persist through a full drive AND sleep cycle ?

Posted

Is there a way to tell which HMI is in my truck from the developers menu? (pressing power, home and menu at the same time) . I have a 2014 Sierra 1500 SLE Z71. From reading all 76 pages I’d assume it’s the 2.0. But I’m confused because my truck has the capability of playing movies on my screen from a usb drive?

Posted
Is there a way to tell which HMI is in my truck from the developers menu? (pressing power, home and menu at the same time) . I have a 2014 Sierra 1500 SLE Z71. From reading all 76 pages I’d assume it’s the 2.0. But I’m confused because my truck has the capability of playing movies on my screen from a usb drive?

Don’t need the dev menu for that it’s a 2.0 . The movies from usb (in park) was removed on 2017+ applications
  • Like 1
Posted
2 minutes ago, GTPprix said:


Don’t need the dev menu for that it’s a 2.0 . The movies from usb (in park) was removed on 2017+ applications

Thanks for the quick answer!! @GTPprix 

Posted (edited)

So I just bought a 15 silvy yesterday.  Was excited to have nav..... wrong... I hit the nav button and only a compass pops up.  Guess it's actually onstar nav and I'm not buying that subscription. Also does not have the projection feature.

 

What's the cheapest way to either, A.. get google maps on the screen or B... get my android phone to project google maps on the screen.  Not looking to break the bank. Prob have to go aftermarket?  

 

Options?

Edited by heiner921
Posted

Yep, do the 2.5 HMI/radio module upgrade for android auto / car play. I did that on my 2015 and very worth it. I do still have factory nav but used AA about 90% of the time.

Posted
56 minutes ago, MNorby said:

Yep, do the 2.5 HMI/radio module upgrade for android auto / car play. I did that on my 2015 and very worth it. I do still have factory nav but used AA about 90% of the time.

So if I have this right, I'll need to

Upgrade to 2.5 Hmi module and have it programmed to my vin.  And also the usb connector...... anything else?What kinda $$?  Under $250?

Posted
So if I have this right, I'll need to
Upgrade to 2.5 Hmi module and have it programmed to my vin.  And also the usb connector...... anything else?What kinda $$?  Under $250?

So really for a minimum install you need the hmi, radio and usb hub. You can find all of the details here:

https://www.whiteautoandmedia.com/product/2014-2015-5-c-k-platform-car-play-upgrade-retrofit-programming/

Most of our customers that choose to supply their own hardware are out the door under $400 generally around $350 or so average.
Posted (edited)

My truck has the usb hub already in the jump seat. So I just need the 2.5 module and send it to be programmed to my vin?

 

If I were to buy a used 2.5 module, is there a particular part number I should be looking for?

 

Do I need a new radio module too?

Edited by heiner921
Posted

I have one of those awesome 2016 Silverado’s that has the 2.0 hmi. I have the XM/HD radio and the proper usb connector. WAMS has my 2.5 hmi that I ordered off eBay as we speak. Can’t wait to get this installed and fingers crossed everything goes well. I’m always nervous about things that seem so easy when the dealer said it would be a huge undertaking.


Sent from my iPhone using Tapatalk

  • Like 2
Posted

I know things are strange all over the world right now, but I got my new hmi installed and everything works great full function and now have CP and AA for about $150. d4953c342087effdc572a021660732ee.jpg


Sent from my iPhone using Tapatalk

Posted
On 3/15/2020 at 1:24 AM, albert_patton said:

I know things are strange all over the world right now, but I got my new hmi installed and everything works great full function and now have CP and AA for about $150. d4953c342087effdc572a021660732ee.jpg


Sent from my iPhone using Tapatalk

Chris really knows what he’s doing!  

Posted

I recently bought a 2016 Sierra - the dealer assured me that all 2016's came with CarPlay- when I took deliver I plugged my phone in - NO CARPLAY -- Even the GM at the dealer was stumped - found out some 2016's got the old HMI module -(GM ran out of the new ones) They were going to make it right, I went to Best Buy and found an aftermarket system for $620 installed (adapters etc..). Did research on this site and found WAMS -- I emailed them a couple times - I really couldn't believe it was a easy as described!  Well it was - I ordered the part from them since they use new OEM parts -- arrived yesterday took 35 mins to install (NOTE: while you have the upper and lower glove boxes off change the cabin air filter) Turned the truck on works perfectly -- Great product WAMS.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • My centre console USB ports haven’t been working and the one in the glovebox is starting to act up. When I plug my phone into the cord the radio will go black and stop playing, and the CarPlay is inconsistent.   I checked the fuses and they were fine. I changed the USB port out and still nothing. Hoping for some advice on what I should be looking at.  
    • The truck is a 1995 Chevrolet S10 Blazer, 4.3 VIN "W" engine. :cracks knuckles:   On a whim - because I needed a headache - this truck was for sale so I stopped to take a look. Doesn't run. Well, it does, but barely. Long crank, choppy idle, bad misfire(s), it REEKS of fuel. I can DO this..I'm thinking. Diamond in the rough. One owner until last year. A young guy is selling it, he bought it 6 months ago. It stranded him more than once, he's got a newborn. It was in the shop 10 days ago and he "thinks" they said it needs a new fuel injection system. He can't put any more money into it, needs it gone. I was thinking of upgrading my Macbook, which is a total want, not a need. For less than the price of a new laptop I can have fun for months tinkering on this truck and enjoying it. I'm taking this truck home. The guy was beyond thrilled, his wife was there, she thanked me profusely, I could tell they were hurting. They seemed like good people in a bind.   Some parts, a wash, maybe a set of tires, and I can have a few months of fun and then turn it for beer money (or the next project).   Sure enough, there's a work order from a shop last week in the INCHES of paperwork on this truck dating back to when the first owner bought it. They put a new distributor in it, fuel injection work describes basically opening the plenum and putting it back together. He said he couldn't afford any more work so he had them button it up and that's when he put it up for sale.   I'm not well versed in 4.3. I did discover 1995 uses the 1992-1995 SCPI "Spider" injector which is riddled with issues from splitting lines, clogged or cracked poppet valves and plastic spider legs that crumble over time. Cool. I'll just order me a ne---. Oh, the auto parts store doesn't have it? Rock Auto doesn't have it. eBay? $$$$$$ for used. These are UNAVAILABLE period end of story unless you know "a guy" who's still got one in a box somewhere.   Can't upgrade to the '96-'04 injector, it's a different plenum, wiring/pinout and sensor config.   There are a few kinda "know a guy" -guy rebuild services for these injectors out there for about $350. Okay, Okay... I'd like to know if anyone has used them? Anyone got a lead on these crappy 92-95 spiders?   I also don't want to send MY spider to Narnia and back without knowing if that's truly the problem. I guess I'll need to pull apart the plenum and do some digging.   I was also thrown for a loop. This 1995 model year truck has an OBD-II connector. The interface is decidedly not OBD-II. I can read and reset trouble codes and view live data, but there's not a lot of data. Like misfire count and on what cylinder, that's not there. It's OBD-1.5.   Nothing is ever easy. Now it makes sense why this guy wanted to disappear this thing for cheap. I'm guessing the shop told him the injector is toast, the part is unobtainable and they're not going to sort sending the thing to a rando offering rebuild service on craigslist, and the kid likely can't be without a working car for 3 weeks even if they'd facilitate that.   Experience with these early SCPI's? Stories? Things to check? Sympathy? (..Nah...)   This can sit until I sort it. But I haven't had a problem with a vehicle I couldn't easily solve in a long time.    
    • I have four that read by the dash 8 to 10% better than miles/pump calculations and I have one that is spot on. 
    • The average lifespan of automobiles on the road is increasing - here's why
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...