Jump to content

Recommended Posts

Posted
19 hours ago, gt tangerine said:

My 2021 during our first real snow of the season here in NE Ohio. I Love the truck immensely compared to my 2019 T1. The ten speed rocks. 

5216C0B8-70B7-4EF0-AC41-610FF1FFABCA.jpeg

Jealous! I wish we could get some snow. Can't say much about the 10spd since I don't have much to complain about it in my 8spd. All this talking makes me want to try the 10spd. Too bad GM does not offer it in the LTs

  • Like 1
Posted (edited)

Had it for a week now. 2021 SLT Z31, Satin Steel Metallic 

SLTZ31BUY.jpg

Edited by 21GMC
  • Like 2
Posted

After the Eibach lift I wanted a more aggressive tread as well as a taller sidewall so I ditched the stock 20" wheels and put a new set of GMC AT4 18" wheels with Duratracs on the Silverado.  

AT4's.jpg

  • Like 3
Posted
Jealous! I wish we could get some snow. Can't say much about the 10spd since I don't have much to complain about it in my 8spd. All this talking makes me want to try the 10spd. Too bad GM does not offer it in the LTs
Actually, they do. You need the 3.0 Duramax though.

Sent from my SM-N960U using Tapatalk

Posted

Great looking setup. So glad to see someone that don't use a set of ugly black wheels. I almost have the twin in the RST version

 

  • Like 1
Posted
21 hours ago, Gangly said:

After the Eibach lift I wanted a more aggressive tread as well as a taller sidewall so I ditched the stock 20" wheels and put a new set of GMC AT4 18" wheels with Duratracs on the Silverado.  

AT4's.jpg

What size tire? 

Posted
On 12/30/2020 at 10:06 AM, Gangly said:

After the Eibach lift I wanted a more aggressive tread as well as a taller sidewall so I ditched the stock 20" wheels and put a new set of GMC AT4 18" wheels with Duratracs on the Silverado.  

AT4's.jpg

Very clean aggressive look... can you give more info on the Eibach lift , specs , size , price ... I have a 2020 trail boss and just want a usable suspension not just a “jack up” truck .. I’ve been there and want a lower center of gravity with real offroad capability.

Posted
On 12/31/2020 at 9:08 PM, Jp sierra said:

Very clean aggressive look... can you give more info on the Eibach lift , specs , size , price ... I have a 2020 trail boss and just want a usable suspension not just a “jack up” truck .. I’ve been there and want a lower center of gravity with real offroad capability.

The Eibach lift is a 2" lift that included front shocks, new front springs, and rear shocks that put me at approximate trail boss height. With the 2 " rear blocks I have right at .5" rake.  The on road characteristics are night and day better with significantly less roll, pitch, and pontooning effect.  Off road characteristics are good with less rocking and rolling around, but a tad too stiff for my liking.  If I had to guess I would say this is a suspension designed for significant on road handling improvement versus off road improvement.

 

Price was less than $600.  I would definitely purchase again.

Posted
11 hours ago, reds10406 said:

AT4 wheels from OE wheels in black instead of the gray. 1" level.

20200925_144019.jpg

AT4 wheels look great. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • It wouldn’t have happened if the government hadn’t mandated outrageous fuel mileage standards. It does very little for the consumer. It adds cost. Back during Covid there was a chip shortage. They gave a rebate for your truck if it didn’t have the chip to turn on cylinder deactivation. It was 50$ because at best you may see 1/2 a mile increase per gallon. Splitting hairs each fuel mileage trick wasn’t mandated. The government doesn’t do the engineering work and say use this until it’s already in use and they like it. The fuel mileage was mandated. And those add ons the results. There’s a mandate and they are the results.
    • It was never mandated.  Ever.    Automakers were incentivized to install it by getting CAFE credits to help with their vehicle fleet fuel economy scores.  They were being handed money/CAFE credits to install it.  Which is NOT a mandate.       The current admin removed the incentives that were behind them installing it.       
    • Are you playing Slide Down endlessly but your score is still low? Are you constantly crashing into obstacles as the game speed increases? Don't worry, this article will share 5 invaluable tips to help you master the race and impress your friends. Golden Rules 1. Look one step further. The mistake of 90% of new players is only staring at their character. The secret of experts is to look towards the top of the screen (where the slide is about to appear). This gives your brain an extra 0.5 - 1 second to process the situation and determine the direction of movement before the obstacle approaches. 2. Use gentle movements; don't swipe too hard. Slide Down is very sensitive. Moving your finger too forcefully or with excessive amplitude will cause your character to be thrown off course or crash into a wall. Practise moving your finger with small, decisive, and precise movements. 3. Don't be greedy for gold in dangerous locations. Gold coins are tempting for buying skins, but life is more important. If you see a gold coin right on the edge of a cliff or next to a spike trap, ignore it. Our goal is a High Score, and your score only increases if you survive. 4. Make the most of Power-ups. During the slide, you'll encounter items like Magnets (attract gold) or Shields (temporary invincibility). Never miss them! Especially the Shield, it's your "get out of jail free card" to help you get through those deadly fast sections. 5. Stay calm when speed peaks. When your score exceeds 500 or 1000, the game speed will be very fast. At this point, don't try to think logically; let your natural reflexes work. Take deep breaths and don't panic. Apply these 5 tips to your next game, and your leaderboard will surely improve dramatically. Good luck climbing the Slide Down leaderboard!
    • If you use compressed air regularly, one problem you cannot ignore is moisture. Water in the air line can cause rust, unstable air pressure, poor tool performance, and even damage to sensitive equipment. That is why I highly recommend using a desiccant air dryer. A desiccant air dryer is designed to remove moisture from compressed air by using drying materials such as activated alumina or molecular sieve. Compared with basic water separators, it can achieve much lower dew points, making it especially useful for applications that require dry and stable air. For workshops, painting systems, pneumatic tools, CNC machines, laser cutting equipment, and industrial production lines, a desiccant air dryer can make a big difference. It helps protect equipment, improve air quality, reduce maintenance costs, and extend the service life of the whole compressed air system. Another advantage is reliability. Many desiccant air dryers are built for continuous operation and can maintain stable drying performance even in demanding environments. For users who care about long-term efficiency and equipment protection, this is a smart investment. When choosing a desiccant air dryer, I suggest paying attention to air flow capacity, working pressure, dew point performance, regeneration method, and maintenance requirements. A good model should match your compressor system and actual air consumption. Overall, if moisture is causing problems in your compressed air system, a desiccant air dryer is definitely worth considering. It is practical, efficient, and highly useful for anyone who needs clean, dry, and reliable compressed air.
    • My brand new 2007 Silverado's wax frame was rust from end to end partway through it's SECOND winter here in MA. That stuff is completely useless.    
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...