Jump to content

Recommended Posts

Posted
1 hour ago, Silverado4x4 said:

TrailDemon have you check the level after they replace the oil line? You look like your 1/2 quart low on the stick now with that said if they replaced the line at the dealership then fill the motor with oil to the proper level on the stick and then started the motor the empty line and oil cooler will purge with oil (getting the air out) giving you about 1/2 quart down on the stick so fill it up to the proper level on the stick and keep an eye on it.

I did go over the oil leve days after and to me it looks like it’s missing more thn 1/2 quart ? 

Posted
On 6/15/2019 at 10:41 AM, jasnak said:

Not an oil leak, engine burning oil now because of the oil line failure and blew all the oil out. Read the thread. 

I think the last few years have shown these di gm engines consume oil, some more then others. Just look at the couple post were forum members took the head off their engines and found oil/carbon deposits all over the valves and top end of the engine. A reason why many here have chosen to install catch-canisters to help reduce the oil build up.

Posted

first service at dealer 6500 miles no signs of any oil leakage anywhere including cooler lines and crimps, at least that's what I was told!

Posted (edited)

Changed my oil again 5,000 miles did the first change at 900.4,100 miles exactly at full mark before change. PP 4qrt 5/20 4 qrts5/30  Napa gold filter

Edited by K455
Posted
On 4/30/2019 at 1:31 PM, quicksilverc5 said:

In looking at the cooler design, it looks like you may be able to replace the whole setup with an AN fitting/braided line setup.  The attachment to the block looks to be similar to the LS designs, When I have a chance I need to look at the attachment to the radiator.  Of course if you do this and mess up its all on you.  Other option is to do a delete.  We'll have to see if its an issue like the window....bad supplier or if it a design flaw do to pressure changes.  I notice that my Oil Pressure varies quite a bit while driving and that could be stressing the connection.

Can you post a pick, if you havent already. going through all the pages

Posted

Hey, got my oil sample back from a 3rd party after this oil cooling line blew all the oil out of the engine  and it came back good no traces of any metal.?  Good peice of mind to have after this incident. If this happened to you I’d recommend getting your oil tested too. Cheap to do for

reasurance 

  • Like 2
  • Thanks 1
  • 3 weeks later...
  • 3 months later...
Posted



2019 Silverado, 23.5k miles.  Oil Cooler Line fail.

Replaced line, refusing to provide CCL letter from the GM Customer Service folks...  Wondering who might I escalate this with?

Posted
1 hour ago, James Dunn said:



2019 Silverado, 23.5k miles.  Oil Cooler Line fail.

Replaced line, refusing to provide CCL letter from the GM Customer Service folks...  Wondering who might I escalate this with?

I am just curious what you filmed this with

  • 1 month later...
Posted (edited)
22 hours ago, jasnak said:

Just wondering if GM fixed this problem or is anyone still having this problem with the cooler lines.

Funny you brought this back up because I was thinking about this the other day and it seems that they all posted the problem all around the same time and now we hear nothing.

 

I was down the dealership on 12-06-19 for the recalls on my truck and was talking to a friend of mine who is in charge of the mechanics in there shop and he said since they have been selling the 2019 T1 truck he has yet to have one come in the shop for a oil line failure, not one. 

Edited by Silverado4x4
Posted

Haven’t seen anything for months on the FB group either. I don’t think this problem is as widespread as 17 pages would suggest, and probably no more common than it was on the last generation.

 

Now the window leak....that’s something!!!

Posted (edited)

2019 GMC Sierra at4 6.2 liter, 11,000 miles. Driving at 20 mph all of a sudden alarms going off saying turn off engine zero oil pressure.I immediately turned it off. Got out to look at it and notice all the oil pouring out the front bottom of grill. Called tow truck and back to dealer. Let’s see what happens. 

Edited by Jaels
Typo
  • Sad 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,920
    Total Members
    8,960
    Most Online
    Frank V
    Newest Member
    Frank V
    Joined
  • Who's Online   6 Members, 0 Anonymous, 1,043 Guests (See full list)


  • Latest Articles

  • Posts

    • Folks, Have a great new 2026 WT  (std cab, 2.7/4WD) w/base 40/20/40 mech adj bench "fake buckets"  (with lower and upper center console) heavy vinyl seats.  Overall the seats are very comfortable and the vinyl is heavy and appears less likely to 'split out'. Am very tall (6'5")  + a bad back/osteporosis/former hyperparathyroidism so ease/range of movement is a bit restricted.  The truck rides a bit high and I use a nerf step bar w/my left foot to step in, then I put right foot/leg in, drag my butt in  & get seated.  Worked fine in my 2018 RAM quadCab. But I end up dragging my butt over the left raised sidecushsion area of vinyl seat, and due to texture there's fair amount of traction on slide inward.  (ArmorAll didn't improve.) If the seat were even ~1/2" - 3/4" lower it'd be helpful, but base seats just have the forward/backward underseat bail and the side lever for tilt which really doesn't affect seat height.   I really don't want to 'de-puff' the left side sidecushion forming the  fake 'bucket'. I know one company sells 'seat elevator blocks':  but is there a simple way of lowering the height of the driver seat instead?   Thanks Bill W San Jose  
    • I have a basic 2026 1500 WT  (2.7L/4WD reg cab shorttbed). Comfy, generally happy with electronics/radio - but is there a way I can add switches to steering wheel right-side position (curr. empty) so I can adjust volume, push phone button to voice dial, etc? Bill W San Jose  
    • The curb weight on a 1 ton crew cab long bed is around 7k lbs.  Now, I don't know where you went to school but 9k is not more than 2x 7k lbs. More than 2x 7k lbs would be 14k+.   With that said, obviously yes you're going to feel a 9k lb trailer when slowing down.  I already said, when accelerating.  When changing lanes?  No.  But if you look at the context of what was quoted, the original person said, "after a mile or two..." which means that would be after the accelerating portion and you're driving a generally steady pace.  Please do learn to read and comprehend.
    • So I purchased the Range unit for my 2026 and I am seeing different locations suggested for the ECM . Can anyone confirm wither under hood, left side or right side or behind the wheelwell?
    • Like I've said before. Di and Carbon buildup is not that big of a concern. Engine had minimal buildup, and that engine was obviously not super well maintained. Do regular oil changes, and you're gtg as long as the rest of the truck lasts. Also, the High Pressure FP that people ****** about, but can't tell you why.  Now, I wish they'd trash the variable oil pump. No real world issues with them, but I'll gladly eat whatever miniscule MPG it's saving me in favor of more oil at all RPMs.    Curious to see his assessment of the 7.3 compared to the 6.6. I expect he'll praise the port inj, but from a structural standpoint, the 6.6 is as robust as any engine out there.    Not to take away from the 7.3. I feel it's equally as good as the 6.6.     As to heat on the rear cyls, I'd have to see numerous examples before I'd say it's an issue. Especially not knowing the history of that engine. For all is known, they could have blown a rad hose, and ran it hot, and the 2 rear cyls may be the first to get hot in a low coolant situation, but not be an issue aside from that. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...