Jump to content

Recommended Posts

Posted (edited)

I just got another call from GM and the dealership stating that they are STILL waiting for this darn PICO scope to measure the vibration. A quick search on the internet and I did find this article on the GM Techlink site. While I don't think this would address my exact issue, I thought it was interesting. Sorry if this is a duplicate post.

 

http://sandyblogs.com/techlink/?p=3820

 

And here is some information about how they do or SHOULD be doing a diagnosis on the vibration issue

 

http://sandyblogs.com/techlink/?s=Silverado&search=Search

Edited by ajdata
Posted

well I got a voice mail from my dealer saying that someone from GM came in and drove my truck and there is nothing wrong with it.... Im feeling the tight torque converter which is designed that way so I get better gas mileage.

Posted

I have a 14 Silverado crew cab 4x4 and I have a vibration in pedal and floor when I am steady on the gas and it gets really bad when I hammer it on the interstate. Does anybody have a definite fix yet? I can't seem to find one. I also had the shutter at 30 mph when slowing down. I removed clips from rear wheel studs and got rid of it. Now I just need a fix for vibration. I have a 2.5 rough country leveling kit with new blocks in rear but from what I have read this should not be a problem, at least I hope not. I am planning on changing rear blocks back to stock to see if it goes away.

Posted

well I got a voice mail from my dealer saying that someone from GM came in and drove my truck and there is nothing wrong with it.... Im feeling the tight torque converter which is designed that way so I get better gas mileage.

Let' see. "Someone" came and drove your truck. "You" weren't afforded the opportunity to be there. "You" don't know who "Someone" is. "You" do not know what specific expertise "Someone" has; but, since "Someone" was from GM, they must be right, you must be wrong, you cannot discuss the matter with "Someone" but since "Someone" is from GM, the case in closed in GM's favor. Maybe you could have "Someone" from Ford, Dodge, or Toyota drive the truck...wonder what they'd say.

 

You see nothing wrong with this picture?

  • Like 1
Posted

I just got my truck back from the dealership for this issue. they had it for 6 days and balanced the wheels and replaced the driveshaft. they also tried to charge me for the balance but I refused to pay. they let it go after discussing for a few minutes. I then drove it to work with the same vibration I had 6 days ago. I called them and explained. now they are saying the tires are to blame( flat spotting overnight) . BS I say. so I googled 2014 Silverado vibration and found this thread on this site. didn't read all 248 pages , lol, but I now realize I am not alone. not good. one thing to note on my truck is the vibration is much more intense when the truck is cold eg: parked over night. after 10 minutes on the hwy its pretty much gone. 20" tires btw.

Posted (edited)

For all you members out there with Shakerado's. Ford has Vibrators too, I decided to make a video today showing the vibration of our new work truck, 2015 Ford F250. If I had a choice to buy a new truck it will be Ram of Toyota from now on.

Edited by Yzkiley
Posted (edited)

well I got a voice mail from my dealer saying that someone from GM came in and drove my truck and there is nothing wrong with it.... Im feeling the tight torque converter which is designed that way so I get better gas mileage.

well that's a new line of BS, at least they are being creative with making up new lies that don't make any sense.

 

with me they said since I drove a regular cab short wheel base truck for 37 years straight, obviously I just don't understand how short wheel base trucks feel and that that's just the way trucks ride lol.

Edited by keakar
Posted (edited)
It's over.


"The consumer and General Motors have reached the following agreement: The manufacturer will repurchase the consumer's vehicle per the standards of

the xxxxx lemon law. Rebates, incentives and any negative equity or over allowance will be deducted from the repurchase award.The consumer is responsible for returning the vehicle without any damage beyond normal wear and tear. The transaction will be completed within 30 days."

Edited by goodbye-gm
  • Like 1
Posted

This is the e-mail I received from today from GM....

 

 

I also received an update from the District Manager over the dealership. He
stated that he was the driver of your vehicle yesterday, and he provided the
following information:

"I drove this truck today for vibration complaint. I did not feel any abnormal
vibration. We program the transmission to get the best possible fuel mileage,
and when we do that the torque converter is locked up in the highest gear
possible for that speed. Sometimes this causes the engine to lug (strain to pull
the truck). When that happens, you get vibration out of the driveline. When you
depress the throttle and give the engine more gas, the transmission will down
shift and the vibration goes away. Also with a stiff frame and suspension, along
with the short wheel base, you feel more road imperfections.

I have concluded this vehicle is performing normally and nothing else needs to
be done."

If you feel there is still a concern present with your vehicle, I would suggest
diagnosis by another GM dealer for a second opinion. In regards to a ride-along
with the service technician, that has to be noted and requested when your
appointment is set, as each dealer is independently owned and operated.

Posted

 

It's over.
"The consumer and General Motors have reached the following agreement: The manufacturer will repurchase the consumer's vehicle per the standards of
the xxxxx lemon law. Rebates, incentives and any negative equity or over allowance will be deducted from the repurchase award.The consumer is responsible for returning the vehicle without any damage beyond normal wear and tear. The transaction will be completed within 30 days."

 

 

CONGRATULATIONS!

 

Waiitng to get the same letter myself. Hopefully soon.

 

How long did it take and did you go BBB or straight to Lemon Law?

Posted

This is the e-mail I received from today from GM....

 

 

I also received an update from the District Manager over the dealership. He

stated that he was the driver of your vehicle yesterday, and he provided the

following information:

 

"I drove this truck today for vibration complaint. I did not feel any abnormal

vibration. We program the transmission to get the best possible fuel mileage,

and when we do that the torque converter is locked up in the highest gear

possible for that speed. Sometimes this causes the engine to lug (strain to pull

the truck). When that happens, you get vibration out of the driveline. When you

depress the throttle and give the engine more gas, the transmission will down

shift and the vibration goes away. Also with a stiff frame and suspension, along

with the short wheel base, you feel more road imperfections.

 

I have concluded this vehicle is performing normally and nothing else needs to

be done."

 

If you feel there is still a concern present with your vehicle, I would suggest

diagnosis by another GM dealer for a second opinion. In regards to a ride-along

with the service technician, that has to be noted and requested when your

appointment is set, as each dealer is independently owned and operated.

 

 

You should demand that you be present for another ride along to show the vibration.

 

 

Sent from my iPhone using Tapatalk

Posted

You should demand that you be present for another ride along to show the vibration.

 

 

Sent from my iPhone using Tapatalk

yep, just like the times they reportedly fixed mine they kept saying it wasn't vibrating and when I questioned them they admitted they didn't even drive it on a smooth road at 70mph but instead drove it only on rough surfaced city streets at 35-40mph even though the service ticket said the problem was on smooth highways only and when doing 65-70mph.

 

they test drive it in a fashion or certain way to avoid the problem just so they can deny the problem exists.

 

another thing is if they ride with you the extra weight on the seat makes it vibrate less so they can say its minor

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • It's possible the two trucks are using different body control modules which is why yours works and the OP's doesn't.   So much in these newer vehicles depends on model/trim configurations, production date. They don't all use the same modules like back in the day.
    • I forgot to answer the question as per what market mine is set to and yes I finally found that area on mine and yes its also set to America.   So here's something I realized as I wasn't looking at that part in the Sierra section until now, your right that what I see here as choice 3 under Sierra which says 07/2023-06/2026 ( 433 MHz 13542523 ) it has no choice 5 for tire pressure selection. Where as it does under the Chev choice. However I kept going down the list within the Sierra and I am really wondering if choice 9 will work for your truck as it has the same model number and hertz sensor as my truck. I would say try that choice first, if that doesn't work then jump over to the Chev section and again choose that same model and hertz choice as for some reason the Chev section gives the choice 5 of tire type/pressure selection for going back a number of years. Could very well be an Autel thing that they just didn't get the updates all done properly under Sierra but anyway first try that selection 9 I suggested under Sierra and then go from there. 
    • Looking for this piece that holds the hose clamp in place. I have the hose clamp just not that other piece. Dealers and wrecking yards in my area will not sell just that piece. They want you to buy the whole air tube $100 +/- to get that $5 part.  that piece isn't molded to the air tube as I looked at my friends truck. It's held on by a screw and nut. I'm trying to put the OEM parts on the truck as the previous owner butchered things up installing an aftermarket CAI. It really looked homemade. 🤣 Thanks
    • Ok I missed that part that yours is a GM. The strange part is that the choice for year ranges and within the year of 2026 is different on the Sierra then on the Chev for some reason as I am looking at my tool at the Sierra choices. Now I am guessing you see as to your sensor part number as it may be different on your truck for some reason and a call to GM should get you the part model number of the sensors you should have as well as which MHz your sensors are. I know mine are the ones as per what I listed but there are other choices in the Autel and got me wondering if by some chance they put different ones in your truck. Having said that, did you try using each of the choices starting from No 1 and going on down the list, not sure if that would mean shutting off the engine each time and resetting the tool and going at it again each time. Also I thought of something else which may sound retarded but if there was some stupid chance that the chev choice would work. The reason I say that is that the Sierra is showing a range up to 06/2026 for the various choices of sensors it could be where as the Chev has one choice that has that 12/2026. By the way it is possible to not run the truck and you may know that as per not pressing the brake but pressing and holding the start button for a few seconds and it lights up the dash ( its called service mode ) but that sucks battery power and if it were me doing it that way I would be throwing on a decent sized battery charger before doing it that way as killing your battery won't make you happy at me at all !.    Like I say, just a thought to try the Chev choices if you have already exhausted the Sierra choices but first it would be nice to know for sure what exact sensor model and hertz your truck uses as I assume only those choices that mention the sensor would work unless a choice that does not mention the sensor model would somehow work. Its frustrating when one is trying to use tools like this without the experience of the tool and the vehicle, as I am sure dealer techs themselves struggle with it when starting out or a new model year comes along that is slightly different. 
    • I tried before I updated the scan tool just incase an update messed it up, but it never worked so I updated the scan tool and it still didn't work.   Only difference is I click on Sierra not Chevrolet cause I have a Sierra.   If I click on 2026-2024 I didn't have any option to change placard, when I click on 2023 it does give me the option but when I try to do it,.it says vehicle not supported!   I have my region or market or whatever it is set to America I think, is that what yours is set to?
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...