Jump to content

Recommended Posts

Posted (edited)

Well there you have it then, problem solved, everyone posting in this thread with vibration issues is just "super sensitive" or full of shit. All the buy backs, trade assists, and replaced parts were for nothing, just a bunch of super sensitive overgrown cry babies.
Why come to this thread just to tell everyone they are full of shit, last I knew to be a member of this forum there is not a requirement to post in this thread.

Edited by 14LTZZ71
  • Like 1
Posted

So if my problem is that I am super sensitive to vibration did I just happen to find a cure on my way to the Toyota dealer ?

  • Like 3
Posted

Damm Damm Damm

The tundra must have dulled my sensors

 

I Can't feel any vibration

Since I traded in my Sierra

 

Strange. I feel fine , I don't do drugs

 

Maybe the Sierra vibration was my imagination after all

 

LMAO

Posted

Damn I tried the Toyota fix, even went with their premium brand Lexus. Now I have 2 vehicles that vibrate. Be right back , I have some service appointments to make! I should not be feeling the road in these vehicles it's unacceptable! /sarcasm

 

I guess you guys took our comments out of context. Of course there is a vibration issue with these trucks nobody is saying there isn't. We were talking about the people that drove 15 GM trucks and said all of them vibrate, yea ok buddy. I drove a few when shopping and none vibrated. You are either super sensitive or have the worst luck in selecting trucks.

 

 

Sent from my iPhone using Tapatalk

Posted

I have a 14 Silverado 4x4 1500 w/20" wheels. Vibration feels the worst at 65 till 72mph.

I have complained about it since new. They have balanced and rotated at every service. They have road force balanced also.

at 21,000 they replaced 3 of the tires. Same issue took back they replaced 2 of the 3 they had just put on. Before they called me they replace one of the 2 they just put on.???? maybe it's not the tires.

They ran it with a Peeko meter? I was told it's within specs. I call Bulls t! They had me come in after I told them that the 2, 16 models that they loaned me were not like mine.

They took the 18" tires and wheels off the loaner and put them on mine. I drove it with the tech. It was still there. Maybe not as bad but didn't come in till 80-85mph on the dash. They told me they would not do anything else to it. that speed is above any posted speed limit therefore GM was out!. I tried to explain that smaller wheel and smaller tire caused speedo calibration to be off, therefore to duplicate the same condition it would show faster than it was going. They argued that and said that they would not do anything else to it. What can I do? I suggested a different brand tire, driveshaft or shocks. I have seen posts on here from Jennifer at GM. who do I call.

I bought and have had it serviced at Jim Trenary Chevrolet in OFallon, MO.

It should be better with a $50,000.00 price tag

Thanks

Posted (edited)

I just thought of something. When you guys are getting tires replaced, especially if they are changing one and two at time, is GM shaving the new tires down to match the diameter of your other tires? Just curious because it could create some differential issues.

 

 

Sent from my iPhone using Tapatalk

Edited by dave07
Posted

I have a 14 Silverado 4x4 1500 w/20" wheels. Vibration feels the worst at 65 till 72mph.

I have complained about it since new. They have balanced and rotated at every service. They have road force balanced also.

at 21,000 they replaced 3 of the tires. Same issue took back they replaced 2 of the 3 they had just put on. Before they called me they replace one of the 2 they just put on.???? maybe it's not the tires.

They ran it with a Peeko meter? I was told it's within specs. I call Bulls t! They had me come in after I told them that the 2, 16 models that they loaned me were not like mine.

They took the 18" tires and wheels off the loaner and put them on mine. I drove it with the tech. It was still there. Maybe not as bad but didn't come in till 80-85mph on the dash. They told me they would not do anything else to it. that speed is above any posted speed limit therefore GM was out!. I tried to explain that smaller wheel and smaller tire caused speedo calibration to be off, therefore to duplicate the same condition it would show faster than it was going. They argued that and said that they would not do anything else to it. What can I do? I suggested a different brand tire, driveshaft or shocks. I have seen posts on here from Jennifer at GM. who do I call.

I bought and have had it serviced at Jim Trenary Chevrolet in OFallon, MO.

It should be better with a $50,000.00 price tag

Thanks

Something to consider, might not be your fix but it was for me. Good luck.

 

http://www.gm-trucks.com/forums/topic/184400-shakevibration-fix/

  • Like 1
Posted

So if my problem is that I am super sensitive to vibration did I just happen to find a cure on my way to the Toyota dealer ?

 

I'm still seeing a Silverado sitting in your garage though, lol

  • Like 1
Posted (edited)

I'm still seeing a Silverado sitting in your garage though, lol

Correction, GMC Denali lol Edited by rdnckhntr94
Posted

Correction, GMC Denali lol

Isn't that a Silverado in his member pic?

Posted

Isn't that a Silverado in his member pic?

Yeah it does look like a silverado, I could have swore he had a Denali though
Posted (edited)

Actually I don't own either of them any longer, these are the new rides

 

 

And it was a 2014 6.2 High Country, it was the second 2014.

 

DSC_5069-M.jpg

 

 

 

DSC_3884-M.jpg

Edited by C6Bill

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • First off pay close attention to what Newdude pasted as he is a GM tech !.    I have a couple of questions which might cross off some questions others on this forum would be wondering about as well. So when was the engine oil changed prior to this trip, was it almost brand new oil or did it already have a fair bit of use on it before you started the trip.   Did you check the oil level on flat ground and was it at the full mark just before leaving on this trip which I gather from google map is about 700 miles or so. Why I ask and this is not the first time in history that has happened, that either a dealer or some other shop changed the oil on the vehicle and the vehicle left the shop and the owner ( you ) assumed the engine oil was full but in reality the person who changed the oil simply did not put enough oil into the engine .. it happens !. Also that a shop put the wrong viscosity oil in and an engine was not happy with that thinner viscosity and oil got past the rings at a higher rate than the proper viscosity. Not to mention if there was any leaking out of a drain plug or the filter gasket etc. 
    • You could, although in the end it really doesn't make much difference what comes out in exact terms since it comes down to putting enough back in so that there is enough volume so that something flows back out once the trans is up to temp for the check procedure. I presume your putting a pan on that has a drain plug but its probably the same pan mold/size as at least a while back no extra volume pan was made for the gas truck version due to the exhaust cross over pipe issue. All I can say as per volume I put back in and this was based on changing out the filter as some is trapped in it that does not come out until its removed because of the way its made inside and my truck had sat over night with the trans having been hot when shut down and dripping internally before I pulled the pan. I went off of what the trans shop suggested as a minimum volume he found worked which was 9 1/2 quarts and I had enough flow out of the stand pipe that I knew I was right on the money once it slowed to a dribble and never wasted hardly any oil but it would be totally fine to throw in a full 10 quarts too. I guess personally I wouldn't ruin a perfectly good pan by drilling a hole in it, not with the cost of replacement pans up here or the dorman one anyway with the drain was 500.00 when I priced one out a while back, totally stupid.    I might not have said before but this trans oil type really expands with heat and I think its been said on this forum and the trans shop said the same so I wanted to try and hit the lower temp of the range vs at the top or go shooting above it as that would allow more oil to flow out which wouldn't be ideal. 
    • Since I am going to be replacing the pan, I am just going to drill a hole in the original to drain it so I will be able to catch the fluid easier and measure how much I took out.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...