Jump to content

Recommended Posts

Posted (edited)

My truck had the vib when i took it out for the test drive. It had 4 miles on it when I drove it off the lot. They told me it was a simple fix.

 

On one repair they gave me a 2016 Silverado and it should worse than mine. I really hope GM works this out. They do have a great truck.

Edited by Binobanbino
Posted

Just out of curiosity, has anyone experienced a change (for better or worse) by putting better tires on the vehicle (i.e. the Michelin's I keep hearing about)?

Posted

Just out of curiosity, has anyone experienced a change (for better or worse) by putting better tires on the vehicle (i.e. the Michelin's I keep hearing about)?

I went with BFGOODRICH All Terrain KO2's, it was my last resort before looking to trade the truck in. Luckily mine was fixed by that, but my vibes were not as bad as most other member, thankfully
Posted

I found out something that may be of interest to some. I work for a Junior College that has a GM Certified Training School (many other major manufacturers do as well). I spoke to the lead GM Instructor if he as ever heard of vibration issues in 14 and newer trucks? He immediately said "yes, very common, they make the frame so stiff it tends to manifest itself in steering wheel" I told him my story about Dealer replacing all Goodyear tires and Road Forced Balanced" them. But, still vibrated. Told him I took it in again and they RFB's one tire again and told me everything was now within GM Spec's. He indicated that the Goodyear's were not great tires, and suggested Continental tires if on a budget, or Michelins if you can afford them. So, he went on to say that RFB, if not done correctly will not necessarily balance tire properly. So, IMO he was aware of the issue and said I need to get RFB's by recently instructed Tech. on RFB's. He clearly said many of the tires were flat spotted, especially if they sat on the dealer's parking for a long time.

 

Here's the part that blew me away: When I was talking to him in the School's shop, I noticed the students were working on relatively two new Silverado's. They were working on electrical systems as they both had their hoods up. I asked "where do you get these slightly used trucks'? he said "they are "buy backs", where he surmised the customer just insisted on a buy back because dealer was not capable of RFB's or they just thought the slight vibration is simply not acceptable to them. So, now we at least know where these trucks go. They are not put back on the street, but rather donated and I assume GM gets some form of tax break. Makes sense to me.

 

So, I believe many need to find a dealer with a Tech. who has taken a recent RFB class offered by Hunter, and insist the newly trained Tech does the work. This helped my vibration significantly. Do I think it is the "cure all'? No, but in my experience it helped to level where I can live with it, assuming it does not get worse in time. My dealer claims it is now in Spec. when the recently FRB's and Pico'd it. If this is true, GM's level of acceptable of tolerances certainly suck.

  • Like 2
Posted

I found out something that may be of interest to some. I work for a Junior College that has a GM Certified Training School (many other major manufacturers do as well). I spoke to the lead GM Instructor if he as ever heard of vibration issues in 14 and newer trucks? He immediately said "yes, very common, they make the frame so stiff it tends to manifest itself in steering wheel" I told him my story about Dealer replacing all Goodyear tires and Road Forced Balanced" them. But, still vibrated. Told him I took it in again and they RFB's one tire again and told me everything was now within GM Spec's. He indicated that the Goodyear's were not great tires, and suggested Continental tires if on a budget, or Michelins if you can afford them. So, he went on to say that RFB, if not done correctly will not necessarily balance tire properly. So, IMO he was aware of the issue and said I need to get RFB's by recently instructed Tech. on RFB's. He clearly said many of the tires were flat spotted, especially if they sat on the dealer's parking for a long time.

 

Here's the part that blew me away: When I was talking to him in the School's shop, I noticed the students were working on relatively two new Silverado's. They were working on electrical systems as they both had their hoods up. I asked "where do you get these slightly used trucks'? he said "they are "buy backs", where he surmised the customer just insisted on a buy back because dealer was not capable of RFB's or they just thought the slight vibration is simply not acceptable to them. So, now we at least know where these trucks go. They are not put back on the street, but rather donated and I assume GM gets some form of tax break. Makes sense to me.

 

So, I believe many need to find a dealer with a Tech. who has taken a recent RFB class offered by Hunter, and insist the newly trained Tech does the work. This helped my vibration significantly. Do I think it is the "cure all'? No, but in my experience it helped to level where I can live with it, assuming it does not get worse in time. My dealer claims it is now in Spec. when the recently FRB's and Pico'd it. If this is true, GM's level of acceptable of tolerances certainly suck.

Unfortunately not all of the trucks are donated to a schools or shops. there have been many many cases of people finding their own trucks that they had "bought back" for sale again on the dealers lot. Similarly if one files a lemon law case and opts for a cash settlement instead of having it declared a lemon and repurchased by GM, those trucks do NOT have their title branded as such. any vin check will still show a clear title even though the truck is a mess. Theres ALWAYS a loophole they can slide through.

Posted

Fountain_NGA

 

I have a 2015 Silverado CC

My original tires-SRA- were replaced at 7000 miles due to sorry tires and vibration. Replaced with Michelin LTX2 and I still have the vibration.

Road force tested and rebalanced and still have vibration !#!!$!$!!

Tech says MINOR vibration. Asked him if he was paying for truck would he call it minor?

He just looked at me............Trying to decide if I can live with it.

Posted

I finally got 4 tires with the rfb numbers 6 and under. 90% vibration gone. The only problem I have is when I change my tire for snows in the winter. Right now it was covered under warranty but what happens when I need to change tires? I do not want to dismount these seeing how they finally got it right. I don't think I should have to fork up money for new rims for my snow tires especially when they ran fine on my 2013 silverado with all the same options.

Posted

Fountain_NGA

 

I have a 2015 Silverado CC

My original tires-SRA- were replaced at 7000 miles due to sorry tires and vibration. Replaced with Michelin LTX2 and I still have the vibration.

Road force tested and rebalanced and still have vibration !#!!$!$!!

Tech says MINOR vibration. Asked him if he was paying for truck would he call it minor?

He just looked at me............Trying to decide if I can live with it.

Keep asking the dealer to fix it. Have they checked pinion angle, etc?

Posted

Flew into FLL today and picked up a 2016 Siverado 2wd with 412 miles at National Rental Car. Got on the turnpike and oh wow...never been in anything that shook that bad. It is manageable below 65mph. Above that it shook the bottle of water right out of the center console. I would be pissed if I just had bought that truck.

Posted

Well this is my first go at the dealer with vibration issues. I have new tires and they were just balanced. Took it to the dealer and he said its common for these 2014 trucks to be out of balance. i laughed to myself because i knew that would be the first thing he said. i did have him drive with me and he noted the vibration, ill let them do whatever need be and if the truck still shakes when i pick it up ill turn right around and go back. Wish me luck. I can say they gave me a 2016 as a loner with 800 miles on it and it was smooth as silk from 70-75.

Posted

I've removed the snows and put the 22s back on. Different vibration than before. Starts at about 115 and goes away about 128. Convinced its tire related. My service manager agrees says he will road force balance them again. I tell him he gonna wear that hunter out. I'm going for replacements, hoping Michelin.. wish me luck. There's only about 8000kms on them and they're already whining on the highway. Bridgestone Duellers... had them on my 2009 louder than a tractor trailer with 30k on them. I suppose I could drive speed limit OPP pretty expensive at 130. GM makes a great truck though aye.

Posted

Oh forgot to add. Service Manager was at some kind of dealer conference. #1 concern from the dealers was the vibration problems these trucks have. Thankfully only a few have it. He insists that GM is looking for a solution though... He's a nice kid :) . Probably any day now lol. Yous can get the news guy to cancel the article, not necessary.

  • Like 1
Posted (edited)

Oh forgot to add. Service Manager was at some kind of dealer conference. #1 concern from the dealers was the vibration problems these trucks have. Thankfully only a few have it. He insists that GM is looking for a solution though... He's a nice kid :) . Probably any day now lol. Yous can get the news guy to cancel the article, not necessary.

I don't trust GM as far as I can throw a 2000sq ft house. lol. The fact that they have known about this problem since 2013 when the 2014 MY was released and they still haven't fixed it is utter bullsh*t. In addition, if the #1 concern at the dealers convention was the vibration, that means that there is one h*ll of a lot more than only a few.

 

In other news, I have changed my servicing dealership, I am now taking my Chevy to a GMC dealer. I physically went in and talked to the service department and asked them if they have had anyone coming back with a vibration in the trucks, he nodded his head yes.. I asked if they have had any luck removing or alleviating the vibration, and again he nodded his head yes. I replied, RFB tires, replace tires, replace rims, replace driveshaft, replace rear end, adjust timing and exhaust pressure, lift body off frame slightly? nodded yes again. To keep this from getting any longer, I have an appointment for Friday morning to take the shop foreman for a ride, he will also be looking at trying to fix my radio problem...

 

here we go again

Edited by Jesse D
Posted

I don't trust GM as far as I can throw a 2000sq ft house. lol. The fact that they have known about this problem since 2013 when the 2014 MY was released and they still haven't fixed it is utter bullsh*t. In addition, if the #1 concern at the dealers convention was the vibration, that means that there is one h*ll of a lot more than only a few.

 

In other news, I have changed my servicing dealership, I am now taking my Chevy to a GMC dealer. I physically went in and talked to the service department and asked them if they have had anyone coming back with a vibration in the trucks, he nodded his head yes.. I asked if they have had any luck removing or alleviating the vibration, and again he nodded his head yes. I replied, RFB tires, replace tires, replace rims, replace driveshaft, replace rear end, adjust timing and exhaust pressure, lift body off frame slightly? nodded yes again. To keep this from getting any longer, I have an appointment for Friday morning to take the shop foreman for a ride, he will also be looking at trying to fix my radio problem...

 

here we go again

Hope new dealer can help you out. Mine is at least trying and mine is 90% better.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Hi friends - first time poster. I have a 2015 sierra Denali with 150k miles, I’m the second owner and she’s given me 75k of great service. I run a pulse AFM disable device. Starting Thursday when I exited the freeway after a short local ride it started idling rough, with an obvious misfire shake and was down on low end power.  I got it home and hooked it up to my scannner and found no codes but in live data a pretty bad misfire on cylinder 5. I replaced the coil, plug and wire with all new OE replacements (Delphi gn10165 coil, acdelco wire and 41-168 plug). It’s still behaving the same way after firing the parts cannon at it.   I know cyl 5 is a non AFM cylinder so I am not thinking this is AFM related but I’m kinda at a loss. injector? Bent pushrod? It’s running too well over 1k rpm to suggest those IMO. Has anyone chase this issue before and what was it? Any suggestions? 
    • 2017 Silverado L83 5.3l 6speed transmission Hello, not a new member but havent posted in a while and my old signup info isnt working so had to create a new account. anyways, I have an issue with my truck and hope someone can spread some light on whats happening: -when it goes to 4cyl mode it makes a clunk sound (but not when coasting or going downhill) -when in 4 cyl mode and under load it makes a load pulsating sound (not a tick). -goes away completely when in M5 gear or when plugging in an AFM delete. Im guessing it is one of 2 things but im not convinced of either to be honest. 1. lifter stuck in v8 mode 2. torque converter shudder realistically it doesn't seem like the TC as there is no physical vibration , and it never happens in v8 mode. but maybe? and wouldnt a lifter make a sound whether with load or not? any ideas let me know please. thank you!  
    • Which has made me wonder with the various engine failures of a few brands in the last few years, is it sub par materials such as lifters etc causing failures, or bearing clearances on the crank etc or perhaps bad designing of an engine physically or causing too much load on the components due to the hp/torque they can push out of them. Or is the oil viscosity and additive package of current oils or a lack of oil flow by an oil pump not able to supply sufficient oil at idle or under high load at low rpm. Or is it every item I listed that combined together has pushed the limits so far to the left that there is hardly a margin of safety left and add in some fuel dilution and too long of an OCI and premature engine failure is the result ?. 
    • He is not saying that an SAE *W20 will have more viscosity than a *W40 due to MORE VII polymers. He is saying that although multiple *W40 may post in the PDS the same or similar 100 C and 150 C viscosities that the blenders choice of modifier TYPE and AMOUNT to get his chosen base to grade will not give identical real world viscosities in shear and at temperature. All will pass the SII test but not all will pass the 100 C HTHS (unpublished value) testing the blender does and relies on to get the required by law "percentage improvement' referenced to his last great work.    Tis the problem with the lie. Once told others are required to support it. 
    • I have a `25, 1500 that auto sets on incline. Never knew that at first. I have the electronic shifter. Just think if it didn`t do that? Unlike a mechanical shift that you can muscle out of park, how would you get this thing out? That would be a problem.   What I found out later is, I don`t have to push the button to release. Just put it in gear.   Setting parameters? Don`t know if it`s possible.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...