Jump to content

Recommended Posts

Posted (edited)

Any of you have 275/60R20 tires or larger? If so, what brand? Improvements to ride quality? I've been all over this forum and a couple others. Mostly curious.

Yes. Toyo A/T close to that size for the first 55K miles, BFG A/T KO2 for 14K miles since. Smooth all the way. Fuel 20 inch wheels since day one.

 

I've driven about 20 Silverados and Sierras, 14-16 model years, and all have been smooth except for one 16 Silverado crew with 5.5 box. Currently have my 14 Sierra crew 6.5 box and 16 Silverado crew 6.5 box. They're both 4x4. The Sierra is non-Z71 with aftermarket wheels and tires, the Silverado is a stock Z71. Sierra has 69K miles, Silverado 2,500. Both smooth. Both 5.3 6-speed. Both averaging about 20mpg overall.

Edited by DanielAcosta
Posted

Could a few of you give more input on how much vibration you're experiencing? I started out with my center console shaking to the point where water was splashing around at highway speeds and my passenger headlight flickering. After 2 visits to the dealership and having 2 tires replaced and all road force balanced I'm only experiencing minor vibration in the steering wheel. It's it even worth it to make it absolutely smooth? How sensitive are these trucks to road imperfections? I feel like I might be being too picky. I mean it is a truck after all, not a sports car?

Posted

According to them, GM does not warrant tire balance. They people at the dealer aren't being assholes about it but I will drop it right back off if it isn't fixed.

Bullsh*t, Ive had my tires balanced 3 times and 10 different replacement tires (not including the originals) and never paid them a dime.

 

Keep the receipt because it will feel great for a few days and slowly return. Get your money back when it does!

Don't pay them to begin with, ask them to let you test it fora week or 2 then if its fixed maybe pay them.... or dispute it on a credit card haha

 

Yeah I believe GM covers the tires, from having to replace them or to rebalance them, up to 12k. My dealer ate the cost of rebalance at 34k, they are awesome

exactly

 

I don't see how they can charge you. I just had two replaced and all 4 road force balanced. Plus the front 2 re-road force balanced after I still was experiencing vibration. I left the dealership today and I'd say it's 98% fixed. I maybe just looking for it so much now that I don't know what fixed even means anymore. I swear I'm paranoid about the issue now, especially after reading this thread lol

I think everyone is paranoid about it haha

 

Could a few of you give more input on how much vibration you're experiencing? I started out with my center console shaking to the point where water was splashing around at highway speeds and my passenger headlight flickering. After 2 visits to the dealership and having 2 tires replaced and all road force balanced I'm only experiencing minor vibration in the steering wheel. It's it even worth it to make it absolutely smooth? How sensitive are these trucks to road imperfections? I feel like I might be being too picky. I mean it is a truck after all, not a sports car?

These trucks have proven to be extremely sensitive to everything

Posted (edited)

Could a few of you give more input on how much vibration you're experiencing? I started out with my center console shaking to the point where water was splashing around at highway speeds and my passenger headlight flickering. After 2 visits to the dealership and having 2 tires replaced and all road force balanced I'm only experiencing minor vibration in the steering wheel. It's it even worth it to make it absolutely smooth? How sensitive are these trucks to road imperfections? I feel like I might be being too picky. I mean it is a truck after all, not a sports car?

I'm with you here. They've balanced these this down from an obvious steering wheel shave to minor trembling on the steering wheel.

 

If I hold the steering wheel with both hands, it pretty much reduces the trembling to an acceptable level. So much that I think the tech would think I'm being OCD.

 

There moments when this changes, I can have a cold morning and it drives great. And I can have a really hot afternoon and it will tremble.

 

Considering how much has the vibration has gone down since the road force, and how the trembling varies with temperature, I'm really tempted to say it's the tires.

 

Even though I want BFG KO2s, I'm strongly considering just switching the tires out to Michelin's LTXs. It'll have to be better than it is, maybe even squash the problem.

Edited by SierraMyst
  • Like 1
Posted

Back again, I do mostly highway driving.

 

I am looking for someone with some mechanical advice on the vibrations that I experience.

 

The vibration moves around. Seat uphill and steering wheel downhill. Comes and goes. Sweeping highway turns seems to be aggravate it more than other things.

 

I would say tires but I have had them balanced and RFB countless times.

 

Any mechanics have an idea what would cause the issue in the turns? That is where I want to start.

Posted

I got call from the dealer. They are saying 3/4 tires are bad. One is a 3. The two are just above 20 and one is 40. Unfortunately I did not buy my tires at the dealership. So I called the place I bought them and they are saying that the road force balancing is not a definitive answer that a tire is defective. So now I have prove to them that something is bad with their tire.

Posted

I'm with you here. They've balanced these this down from an obvious steering wheel shave to minor trembling on the steering wheel.

If I hold the steering wheel with both hands, it pretty much reduces the trembling to an acceptable level. So much that I think the tech would think I'm being OCD.

There moments when this changes, I can have a cold morning and it drives great. And I can have a really hot afternoon and it will tremble.

Considering how much has the vibration has gone down since the road force, and how the trembling varies with temperature, I'm really tempted to say it's the tires.

Even though I want BFG KO2s, I'm strongly considering just switching the tires out to Michelin's LTXs. It'll have to be better than it is, maybe even squash the problem.

I have feeling eve

You took the words right out of my mouth. Two hands on the wheel and it drives really well. Driving with 1 hand, I'm about to lose my mind with the vibration even though it's minuscule. I wish I could drop the coin to try out new tires but it's not in my budget at the moment. Also I feel like I vibes more when in AFM (V4). I just went on a 30 minute drive and it feels like I'm getting steering wheel vibration at most speeds. If you buy new tires please post if it helped or didnt. I think we have the exact same issue.

 

2016 Silverado LT double cab 5.3L

Posted (edited)

Well my vibration is completely gone. Was tires of the dealership excuse. So I decided to try a few things myself. I started with swapping CV axles with new ones from the parts store. No change so I returned them. Then I replaced the drivers side hub assembly(wheel bearing) And all I have to say is POOF it's gone. Rides smoother then new. 8c5c6e32e09155dc17a492ca515ccdf8.jpgd8ad7df6819b239b4b3752e473a97836.jpg

 

 

Sent from my iPhone using Tapatalk

Edited by smcgillis10
  • Like 3
Posted

I own a schizophrenic 2015 Silverado 1500 4x4 Z71 Crew Cab. Bought new in October, 2015. First 300 miles I thought I was driving a Cadillac. Then hit 76 mph on the interstate and got the shakes, bad. At 1600 miles dealer replaced 2 tires and 2 shocks, RFBd the wheels/tires and things got much better, in particular the 75-80 mph highway vibe. Now have 9000 miles and intermittent vibrations/shakes/jiggles anywhere, anytime/ any speed / any road surface. And sometimes the gear shifts feel like an old first generation auto transmission from 50 years ago. Went to dealer, drove a 2016,and 2017. Unfortunately I feel the same underlying shimmy/jiggle at any speed, just not as severe . Cannot believe GM gets away with selling this crap. I'm done. Life is too short to dance with ugly women or drive a POS truck . And we taxpayers bailed these charlatans out. Ughh.

Posted

Naah we didn't bail em out. They had plenty of assets and reserves to get em by just fine.

Posted

Well my vibration is completely gone. Was tires of the dealership excuse. So I decided to try a few things myself. I started with swapping CV axles with new ones from the parts store. No change so I returned them. Then I replaced the drivers side hub assembly(wheel bearing) And all I have to say is POOF it's gone. Rides smoother then new. 8c5c6e32e09155dc17a492ca515ccdf8.jpgd8ad7df6819b239b4b3752e473a97836.jpg

 

 

Sent from my iPhone using Tapatalk

Where were you getting vibrations and what did it feel like?

Posted

I wear crocs when I work on vehicles sometimes, unless it's something like a transmission or rear end or something. They're like clouds for your feet #noshame

  • Like 1
Posted

I wear crocs when I work on vehicles sometimes, unless it's something like a transmission or rear end or something. They're like clouds for your feet #noshame

Flip flops here buddy. Haha!
  • Like 2
Posted

I got call from the dealer. They are saying 3/4 tires are bad. One is a 3. The two are just above 20 and one is 40. Unfortunately I did not buy my tires at the dealership. So I called the place I bought them and they are saying that the road force balancing is not a definitive answer that a tire is defective. So now I have prove to them that something is bad with their tire.

There actually are standards for RFB tires. 40 is way over, 20... depends on where withing 20 it is. If i remember right 23 or 25 is the standard high. 3 is very good, and a very stiff sidewall

 

Naah we didn't bail em out. They had plenty of assets and reserves to get em by just fine.

http://townhall.com/tipsheet/conncarroll/2015/02/04/its-official-the-auto-bailout-cost-taxpayers-166-billion-n1952771

 

right... GM didn't get bailed out, keep telling yourself that

Posted
There actually are standards for RFB tires. 40 is way over, 20... depends on where withing 20 it is. If i remember right 23 or 25 is the standard high. 3 is very good, and a very stiff sidewall

 

 

They are Hankook Ventus ST RH06 305/45/22

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Common Sense Assembly   Your driveline is forgiving of the occasional mistake. It will even often forgive the random serious blunder. But it will not forgive a continuous bad habit.      What? Not everything needs to be a five thousand word essay.       
    • We drove about 15 minute east today to visit a friend and saw a steep increase in price in the same county. About 50 cents a gallon steepper. 
    • Sure about that? A degree wheel and a dial indicator would lower your degree of assurance in that statement. 😉    It why we have offset keys and dialable timing sprockets. Just say'n.... I've built a few and have never seen one "On the money". 
    • I will admit I haven't experimented much with pressure drops beyond the numbers I put in and part of that is that the numbers I used are fairly low and then found out it would trigger regardless at that 35 psi. Having said that I had tried before had changed the placard pressures and being that I have a 1 ton set to 80 on the placard for the rear I believe it triggered close to 60, the front I don't recall now for sure but thought maybe it could get close to 45 from that factory 60 placard pressure. So I never did figure out if it was a number of psi from placard pressure to the alarm or a percentage of the total placard number as some figured it was like a 25% drop from placard pressure would trigger it. So as to try and answer your question, I believe I set the placard pressure on the front to 47 or so and while I run the front tires at 40, they have dipped below that some if its colder and I haven't put "winter air" in yet and never once have had the front alarm go off. I would say that the answer your looking for is no, that if you set your placard pressure to 45, you have a certain amount of room to drop below that pressure before the alarm will go off.    The pressures you decide to run in your truck, that ends up being what makes sense to you based on what your carrying in your truck or if towing, then have to bump them back up to something that will carry the load in the rear and the fronts typically left at the same pressure. It all comes down to that chart I put the link to and using an accurate roadside scale to be your guide, both unloaded and then loaded to know your minimum safe pressures.    I just wish GM would allow a person to change the readings for the tire pressures to the English system of pounds as I have to look at that goofy metric reading that will never ever jive in my head and will go over and change it just to figure out what they are if need be and then change it back. 
    • That part I understand, that the dealer can do it. But I'm not understanding why updates that were available to the truck since it left the factory, or the dealership originally, would not still be available to it without dealer intervention.   I'm thinking along the lines of recalls. They stay available until they are completed, regardless of whether they are in warranty or not, or in the hands of the original owner or not. Why not updates as well, especially since some of those can be safety related also?
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...