Jump to content

Recommended Posts

Posted

Anyone else with a new 2014 Sierra having an issue with the frame rusting and paint/wax flaking off? I have 3000 kms and it looks horrible. I also own a 2011 Canyon service truck with 105kms and the frame looks like new. So irriating as my Sierra is a beautiful truck aside

Posted

Ya talk about frustrating, I just cleaned the snow off mine this morning and I noticed there's all surface rust spots along the front bumper. Not very pleased at all, the trucks only 6 months old.

 

First complaint I've had about the truck.

 

 

Sent from my iPhone using Tapatalk

Posted

Ya I'm doubting that, there all on the top line of the bumper all the way across. There not just random spots on the front.

 

 

Sent from my iPhone using Tapatalk

Posted

I have surface rust on my frame also. Alot of salt on the roads this winter in Ohio. I always spray underneath as often as I can .

Posted

There is a TSB out on this, GM had some problems with the wax coating on a small run of trucks. Take it into the dealer as the TSB gives direction on how they are to repair it.

Posted

Any idea on what the tsb fix is? I know on earliar silverado models I have seen frame rust on trucks that are unsold sitting in the dealers lots.

Posted

I remember that when I had my truck on a lift, frame coating in contact areas with lift rubber pads came off and stuck to the pads. I just recoated the bare spots with rubberized undercoating. If the spots are small and there is rust present, you can just brush it with wire brush and spray on some undercoating.

Posted

I don't have a problem with the frame, but the rear axle has light surface rust on the shock mounts and diff cover. I live in S Fla. And haven't seen salt

Posted

I don't have a problem with the frame, but the rear axle has light surface rust on the shock mounts and diff cover. I live in S Fla. And haven't seen salt

This is very common on these trucks. Mine truck has it too. I went as far as ordering a new differential cover and to my surprise, it was bare metal, not even primed, and had rust spots on it already! Plus it had an extra fill plug and no drain plug. I returned it becuase i would have had to sand and repaitn the new cover, so I just might repaint my old one.

 

The best solution for the differential cover rust is to wire brush the cover with drill powered wire brush on the truck, then prime with black primer and give it several coats of black enamel from a spray can.

Posted

This is very common on these trucks. Mine truck has it too. I went as far as ordering a new differential cover and to my surprise, it was bare metal, not even primed, and had rust spots on it already! Plus it had an extra fill plug and no drain plug. I returned it becuase i would have had to sand and repaitn the new cover, so I just might repaint my old one.

 

The best solution for the differential cover rust is to wire brush the cover with drill powered wire brush on the truck, then prime with black primer and give it several coats of black enamel from a spray can.

I was looking for a polished stainless steel one for mine. Can't find it online anywhere.

Posted (edited)

Count me in for the rust! I've been playing with the air pressure in my tires to see if it makes a difference in the ride and vibration that I feel, and I was letting air out of the left rear tire and noticed my undercoating cracking and peeling with rust under it. Look under the truck and found more under the area of the rear door. I have spots of rust hear and there all over the frame and that's probably somewhat normal, more of a bleed through and my deaIer had my truck up on a hoist at least 3 times and where the pads touch the frame the wax came off and it's rusting. That suff Is going to happen to all the trucks but it should be peeling and cracking off in non wear areas. Checked the right side and so far it's ok but I bet it's just a matter of time.

 

I'll try to get some pics up.

Edited by Silver Spaceship
Posted

i noticed on my frame this weekend to that the ''wax'' paint can be scraped off with my finger..why dont they paint these frames with paint! im worried the pressure washer is gonna chew that stuff right off..i want my old 04 painted frame back..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Question @diyer2 on this line if you please. Are you saying the shudder is the system turning on and off at the frequency of the shudder? Guess I'm asking if you are saying you have seen it do this with the bi-direction scan tool in graph mode? If so have you been able to discern the 'trigger'. Something is telling to cycle rapidly.    My truck just started doing this recently. 197K on the clock. My response has been M5 anything under 55 mph. I treat it like a lugging stick shift. Gear down and let it spin a bit. Engauge M5, then tow mode and then M6 lets the trans stay in 5th but the AFM is active. Smooth like Skippy.    My thought was that as a machine ages the friction gets lower and as the system is load based, the lower friction would allow it to turn on at ever lower rpm until it reaches the lugging point. And yes I am ignorant of any minimum rpm requirement for the system. If you know that would be useful information.    As you know I run a Scan-Gauge II which allows me to watch the On/Off of the signal to the VLOM. While in the shudder mode I'm not seeing is cycle at that frequency or at all for that matter outside the triggers @newdude posted a few years back. Now is it possible that the refresh rate isn't fast enough to catch it? Maybe. It is why I asked my first question about graphing and trigging parameter.     As we have observed from members here the failure point is all over the map miles wise as you note yourself in your opening post. That by itself begs a few questions like fellows that comment on these lifters failing even after the system has been disabled. Long after. 😬   https://www.enginelabs.com/news/tech-tips-replacing-ls-active-fuel-management-lifters-with-melling/   The Gen5 lifters operate the same as the LS versions. In fact they are the same lifter.    https://www.enginelabs.com/tech-stories/sorting-out-gen-v-lt-lifter-failure-with-a-simple-valvetrain-fix/        
    • UPDATE 2: Steering wheel control backlights and control of the cluster can supposedly be achieved by adding a wire to pin 20 of the cluster and tapping it to pin 2 of the main clock spring harness. I'm going to give it a shot - will update  
    • GM Global A pickups 2019-2022 can do OTA programming for the radio.  GM VIP (GM Global B) can do OTAs for almost every module on board.  So a 2022.5 and newer pickup can do OTAs for recalls like the 2.7 fuel flow recall.  EVs get OTAs that improve one pedal driving, radio issues, HVAC issues, updated battery management software, etc.     So age of the vehicle/what GM electrical platform its on will alter what amount of updates can be pushed on OTAs.  
    • Thank You.   So far my new ride is making me look like a genius for going with the 3.0L, as my first fuel refill occurred over three weeks from when I took delivery.  This engine combination is very amazing.  So far no issues and had not done a regen yet.
    • I am curious as to how much fluid you put back in the transmission ( assuming you had replaced the filter to compare to my findings ) and then went through the process of warming up the trans before pulling the check plug to drain out the excess and if you measured how much came back out.    I just found it surprising that some claimed a certain amount less fluid being put in and then draining some back out. The attitude of the truck as per if the surface is level and how the trucks stance is would make quite a difference since the check plug is right at the front of the transmission. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...