How-To Install an Elite Engineering E2 Catch Can

[The.Sundae.Drive]

 

 

The Sundae Drive does an in-depth video showing how to install an oil catch can for a 2014 Silverado 5.3L. What are the benefits of an oil catch can? Well if you visit the follwing sites you can read all about the benefits and importance of running an oil catch can. Catch cans are NOT ONLY for turbo/supercharger applications. They can be very beneficial for people with naturally aspirated setups. https://www.redline-motorworks.com/bl... http://oilcatchcan.com/oil-catch-can-... Purpose of your Stock PCV System: The PCV (Positive Crankcase Ventilation) system is designed to regulate and remove fumes from the engine crankcase and to alleviate crankcase pressure which could cause oil leaks or seal damage. The PCV system routes crankcase fumes into the intake manifold where they can be burned to eliminate harmful emissions into the atmosphere. The PCV valve controls the amount of crankcase flow volume depending on the engine's load. With large throttle openings (high engine loads), the more blow-by gases are produced, and the more the PCV system flows oil vapor into the intake manifold. A small amount of that ignited mixture leaks past the piston rings and ends up in the crankcase. This leakage is often referred to a "blow-by" or leakage past the pistons. Some of the oil mist and other products settle along the engine intake and over time form a "gunk". Our oil catch can collect the oil mist and condensed the fuel vapors while allowing "cleaner" gasses to pass back into the intake manifold. To pick up a Catch Can of your own go check out: http://www.eliteengineeringusa.com/ Here is the link for the E2 Catch itself and a diagram showing how it works! http://www.eliteengineeringusa.com/e2...