2014+ K2XX - Center Console Swap / Retrofit - Plug and Play Harness!

[pgamboa]

 Need harness to swap jump seat to console

That is a 16-Pin. Send me a PM and will get your ordering instructions. I am making a batch tomorrow.


Sent from my iPhone using Tapatalk

[Amilly556]

On 12/22/2017 at 1:32 PM, Hogtiming said:

I installed this harness this morning and happy to say that everything works. Very easy to install and completely plug and play. Everything now looks and works as if it were from the factory!

 

Thanks again Phil!

I just with the consoles weren't so expensive!  

[Koppster]

Does anyone know how to take the lid (armrest) off without removing the console?  

 

I received a 2015 console with an charging lid but the stitching was red and should have been white. GM Parts Online willing to exchange but I can't figure out how to remove the lid without taking out the console?

 

I found the 4 screws in the rear cubby and removed the 2 bolts/6 screws inside the console storage area but nothing after that.

Thanks,
Rick

[pgamboa]

Does anyone know how to take the lid (armrest) off without removing the console?  
 
I received a 2015 console with an charging lid but the stitching was red and should have been white. GM Parts Online willing to exchange but I can't figure out how to remove the lid without taking out the console?
 
I found the 4 screws in the rear cubby and removed the 2 bolts/6 screws inside the console storage area but nothing after that.

Thanks,
Rick

If you found the 4 Torx screws in the rear of the panel, the panel pops off. Once off, you should see the lid hinge and screws that hold it in.

Here is my video on a rev. 2 cable I made and show how to remove the rear panel.

Sent from my iPhone using Tapatalk

[Koppster]

Phil, that's perfect, I was not pushing up at an angle! Thank you very much. 

 

Hope you received my 23-pin and looking forward to finishing this mod up!

 

Thanks Again,
Rick

[pgamboa]

Phil, that's perfect, I was not pushing up at an angle! Thank you very much. 
 
Hope you received my 23-pin and looking forward to finishing this mod up!
 
Thanks Again,
Rick

Picked it up yesterday. Should be out the door tomorrow. I use your PayPal email for the outbound shipment notification so Be on the lookout for an email from the USPS.


Sent from my iPhone using Tapatalk

[Koppster]

Huge Shout Out to Phil! Received my 23-pin and it works as advertised. Beyond impressed with his product and support! Great guy, great product! Can't say thanks enough!

[pgamboa]

Huge Shout Out to Phil! Received my 23-pin and it works as advertised. Beyond impressed with his product and support! Great guy, great product! Can't say thanks enough!

Awesome! Thanks for the support and feedback!


Sent from my iPhone using Tapatalk

[kfs0121]

Phil,

Do you know where I can get a connector to replace the brown one on the console?

 

Thanks,

Kenneth

[pgamboa]

Phil,
Do you know where I can get a connector to replace the brown one on the console?
 
Thanks,
Kenneth

No sir. These USB connector ends are tied to and are part of the USB cable/harness.


Sent from my iPhone using Tapatalk

[kfs0121]

Ok, thanks.

[Hubbstx]

Phil,

Sent message needing your wiring harness. Let me know what is needed from me next. Thanks

[Jconde]

Would love to upgrade my entire jump seat to the full console where would I find one for a 2018 crew cab silverado. I would also need to order your wiring kit for the console. By the way I started following you on YouTube I will be doing my upgrades my now just cause your videos are so good.. Thanks Brotha keep up the good work!!!!

[Scott0063]

Phil , I am interested in purchasing the wiring harness for the center console swap 

[email protected] 

[pgamboa]

Phil , I am interested in purchasing the wiring harness for the center console swap 
[email protected] 

Please send me a PM. I am on vacation until 6/19 but taking orders while on vacation. I’ll be building/shipping booked orders when I return in the order they came in.


Sent from my iPhone using Tapatalk