Jump to content

Recommended Posts

Posted

Truck is in shop and it is coming to a head. Problems will be over tomorrow. I will get satisfaction. Life is too short to worry about a truck. Sometimes we make bone head decisions. We try to depend on a brand. Not this time. They dropped the ball and there is no fix. Good luck. I do not want my truck back because it pisses my off just to look at. Used to be when you get a truck you get up in the middle of the night and go in the garage and sit in it..Sorry to say I cant stand the sight of it.....

Went to shop today and they are sending drive shaft in to balance and add some weights or something to stop the drone or hum. At least they are more proactive. I looked at Dodge and Ford and I just plain don't like them. As long as they give me vehicles and stay on it I will be patient. They have 2500 HD in the lot but won't fit in the garage.

Posted

Went to shop today and they are sending drive shaft in to balance and add some weights or something to stop the drone or hum. At least they are more proactive. I looked at Dodge and Ford and I just plain don't like them. As long as they give me vehicles and stay on it I will be patient. They have 2500 HD in the lot but won't fit in the garage.

Post up your result, I hope this cures your problem.

Posted (edited)

I go in for a new drive shaft on Monday, not real hopeful. The more I drive it, the more I think it has to do with transmission gearing and RPM's vs V4/V8. It reminds me of driving a manual and starting out in too high of a gear. I went on a icefishing trip with friends last weekend and was utterly embarassing on the drive out with the amount of shaking. It sat for a day and on the way home the first half I didnt notice much of anything until I went up a hill and then it all went to shit again.

 

I dont know, I'm so tired of it.

Edited by microwave
Posted (edited)

Has anyone tried the AFM delete to see if that makes it better at all?

 

Mine is at about 70mph and over, but those experiencing the vibrations on hills etc, I wonder if that would help. I too am with you microwave in thinking that it might the the rear end and gearing etc. because new tires or drive shafts aren't appearing to make things any better.

 

Hopefully you will have luck with the drive shaft, let us know!

Edited by hotrodz37
Posted

Update: After my seventh trip to a dealer and riding with the engineer, he said it's a tire issue!!!!!!!! Even after 11 tires and 8 road force attempts. He acknowledged the vibration both on the highway and in the dealer parking lot. Still thinks is a tire issue at 5mph on brand new cement in the dealer parking lot!!!!!

 

I absolutely believe it is a transmission issue as mine is behaving worse and worse, slipping gears, abnormal shifts, clunky shifts. They drove in for only 13 miles and reported no abnormal transmission issues..............Eight visits and fighting them for months and that is a far has they drove it!!!!! I let a co-worker take it to lunch one day and he said he does notice the vibration but what he noticed the most was the abnormal shifting and lurching................

 

I highly highly recommend everyone on this forum contact a lawyer. It is very easy and does not cost you a penny. GM will not take care of us or this issue. Let them deal with the lawyers and save yourself the horrible stress and nightmare.

  • Like 1
Posted

If it's not the tires then it must be the driveshaft. From my personal experience on several past vehicles with vibration issues, the factory shafts were slightly bent and way out of balance and of course the dealer was no help. The faster it spins the more it will whip out of shape. I've had them balanced and straightened at a driveline shop, spent the $150 or so and the problems disappeared, worth every cent and no more aggravation.

  • Like 1
Posted

I just noticed this topic has been moved to the sub forum, is this normal? Or is it being swept under the rug?

I think you something there. It is a huge problem. Expensive fix.

Posted

If it's not the tires then it must be the driveshaft. From my personal experience on several past vehicles with vibration issues, the factory shafts were slightly bent and way out of balance and of course the dealer was no help. The faster it spins the more it will whip out of shape. I've had them balanced and straightened at a driveline shop, spent the $150 or so and the problems disappeared, worth every cent and no more aggravation.

 

The dealership took the drive shaft off Friday and is sending out. Checking yolks and anything that could wobble. Will keep you posted.

Posted

So when I drive my truck at any speed u feel a slight vibration from my feet all the way up to my head. When I get to a stop sign the vibration goes away while I'm stopped. Is this the vibration everyone is experiencing ?

 

I can still feel it in my body after a 30 minute drive.

Posted

Relax dude. My truck had a terrible vibration too and instead of going to the dealer demanding a fix, I told them what I had calmly and they believed me. Left the truck for the day and they replaced the back left tire and the vibration is completely gone. Mine was between 72-80 mph winds onlh with driveline speed. Take it to a different Chevy dealer IMO. Fighting with a dealers service team only makes them want to help you less...

Posted

Relax dude. My truck had a terrible vibration too and instead of going to the dealer demanding a fix, I told them what I had calmly and they believed me. Left the truck for the day and they replaced the back left tire and the vibration is completely gone. Mine was between 72-80 mph winds onlh with driveline speed. Take it to a different Chevy dealer IMO. Fighting with a dealers service team only makes them want to help you less...

Relax dude? I glad you think you know me. I have been nothing but pleasant with my dealership as the problem isnt their fault, they just sell them. I have been in 7 times now, including tire balancing and replacement along with a new driveshaft that did nothing. So no, I wont relax dude.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Your tire pressure issue may just be batteries, you can reset them using tge Ing switch (I think) and the owner's  manual. ChatGTP will b e a faster, better help than Google.
    • The thinking is that starting out in a higher gear makes it easier to avoid applying excessive torque when pressing the gas pedal. In a modern 4wd truck with 4 low and a limited slip or locking rear end, I would use 4 low and try to crawl up the ramp. Sometimes if they are too slippery, you have to back up to let the boat have some bouyancy, and then accelerate briskly to get some momentum to help you pull the through the slippery parts. 
    • I have a Retrax pro that I first had on my 2020 chevy and transferred it to my current GMC.  It stays in the garage most of the time, so hard for me to judge it's long term weather resistance.  It still works perfectly, been very durable.  It doesn't see oil patch usage, but it's not a mall queen.  It keeps most things mostly dry (small leaks) and the security of it is enough to slow someone down but not keep them out for long.  I would buy one again, it works for me.     
    • Thanks to the convenience of Amazon, I was able to get a few things done to the truck today.  I installed Carquest Premium oil and air filters with five quarts of Mobil1 High Mileage 10-30 along with a quart of Pennzoil Platinum 5w-30 I already had.  The latch for the flip up center console lid was broken so I replaced it along with the power mirror switch.  I found my push retainer assortment this morning and reattached the plastic under the bumper and it was only held on with a few screws and retainers.  Then I programmed a new remote keyless entry fob so I can lock my dog in the truck when I take her out with me (I've got to keep the air going for her since it's been in the 100s).  Finally, I ordered some LED interior bulbs and replaced the reading lamps.  The front lights are working fine while one of the back lights only works intermittently and the other not at all.   While under the truck, I found the source of at least one of the noises: the sway bar links need replacing.  I ordered a set of Suspension Dudes links with Code Red bushings.  Never heard of them, but they're made in the USA and have decent reviews.  While making yet another Amazon order, I went ahead and added a set of front tow hooks.  I went with red, since that's the color of the sway bar link and bushings and it should look decent enough on a black and chrome truck.  Speaking of which, it doesn't bug me much, but the passenger side mirror has a chrome cap while the driver side doesn't, so eventually I'll make them match one way or another.  Oh, and I ordered a $20 TPMS reset tool.  No idea if it will do anything for my sensors but it was cheap and will work for the Ford Transit Connect as well.     For tradition's sake, I ordered a new oil change wrench.  I kept the Snap-On 9/16"x15mm GM wrench I bought when I was 18 in the 2006 GMC from the time I bought that truck until the truck was lost.  While I was tempted, there's no need to spend $80 for a new SO wrench, or even $50 with shipping for a used one on Ebay.  I just bought a Duratech 15mm extra-long ratcheting wrench to do the job as needed.  It works, and if I like that wrench enough, I'll buy the set.  
    • The recall is for exactly this issue - those drain holes combined with the limited environmental capability of the tailgate electronics card inside the tailgate were a problem. The “safety issue” was the potential for the tailgate to spontaneously open, but all kinds of tailgate misbehavior can occur from water contamination of that control card.    There is no real fix yet. The initial recall just disabled the tailgate. Later, when parts became available, they would replace bad parts with new parts of the same bad design. My dealer is going nuts because the few times I let them get their hands on my truck, my tailgate is off due to a slide-in camper installation. They really want to cut my tailgate wires, but I won’t give them the chance. I will let them get their dirty hands on it when a real fix (redesign) is available.  My tailgate, which works just fine with sealant plugging the drain holes, will remain safe in a dry storage crate until then.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...