Jump to content

Recommended Posts

Posted

 

 

Some dealerships have equipment to hook to a truck to measure vibration and pin point where it is coming from.

If your dealer does not have the equipment or expertise ask if they can send you to a dealer that does.

 

Yes. They did hook up the machine to pin point the vibration. The frequency of vibration indicates a tire issue. Changed tires and force and match balance. The did not change anything. The truck just rides smoother. But vibration still there.

 

Since it is pinpointing the tires, it seems to me that it is easily eliminated. Have the dealer find a truck on lot that isn't vibrating. Do a tire swap and see what the tires do on the opposite vehicle. Tires eliminated and then they can go to the next step. I am surprised that so many post here that the dealer changed tires several times trying to resolve the issue. You can swap tires easier than you can mount new ones.

Posted

Easier said than done. I've driven over a dozen while trying to find a doner vehicle. No luck.

Posted

I drove a demo 2014 for a month and it drove great, then bought two 2014's. I have had several loaners while one of the new ones was in the shop. I drove several demos to compare. In all about 7 trucks and 2 had the vibration bad enough to worry about. I am in a loaner 2014 now and it drives very smooth and no vibration at all.

 

Actually when I was trying to prove it wasn't the tires it was random chance that I ended up with a truck that drove smooth.

Posted

The device used to detect vibrations is called EVA. (Don't know what that stands for but I would guess Electronic Vibration Assessment?)

I wanted to share with where I am at. I am completing the buy back of my 2014 double cab for a crew. Double had the 3:08 and the crew has 3:42. I have found that having weight is the bed mitigates the vibration. I'm in the TV business and had a 70" Sharp laying across the whole bed... No vibration after driving 30 miles to the job site. This is telling me it's a hormonic vibration issue. I'm not certain but it points in that direction.

 

I am also in agreement with forming a group to have a louder voice that GM may hear. Since this issue is a is not a threat to life, it will most likely on deaf ears as most of us have found out.

 

I will continue to post any new findings. Thanks guys!

  • Like 1
Posted (edited)

I have a bed cover on my truck and new tires completely solved my vibration. Food for thought.

Edited by 20Bowtie14
Posted

I was thinking, this may be a shot in the dark so.... Maybe with the bed of the truck being so thin and light in sheet metal, maybe the airflow at certain speeds is causing a vibration as if you only opened one of the 2 rear windows and the harmonics inside are way off... IDK maybe the TV in the bed offsets the air slightly and changes the harmonics/air flow? Nothing to do with weight though... My truck has a bed cover and my vibration was solely the shitty Goodyears. Maybe something to do with the flow of air under the vehicle? Take off the front air spoiler/dam and see if it changes? If GM can't figure something out rather than throw parts at trucks hoping to get lucky, we really have to help ourselves in this situation.

Posted

I think they can skirt the lemon law by stating that there are a lot of trucks out there that are within spec. A lemon would be one that is one bastard child and can't be fixed. Except now there are thousands of bastard children.

Posted

I have a bed cover on my truck and new tires completely solved my vibration. Food for thought.

I tried that. Cover had nothing to do with it. Tires tires tires. Put your cover back on so the groceries don't get wet.

Posted

Call the Attorney's working on the key issue in the news, bet they would be interested to hear they are ignoring yet another saftey problem.

Posted

The device used to detect vibrations is called EVA. (Don't know what that stands for but I would guess Electronic Vibration Assessment?)

I wanted to share with where I am at. I am completing the buy back of my 2014 double cab for a crew. Double had the 3:08 and the crew has 3:42. I have found that having weight is the bed mitigates the vibration. I'm in the TV business and had a 70" Sharp laying across the whole bed... No vibration after driving 30 miles to the job site. This is telling me it's a hormonic vibration issue. I'm not certain but it points in that direction.

I am also in agreement with forming a group to have a louder voice that GM may hear. Since this issue is a is not a threat to life, it will most likely on deaf ears as most of us have found out.

I will continue to post any new findings. Thanks guys!

I think you are correct in your assessment, "harmonic vibration" based on the experience I have had, and feedback I have gotten from a dealer I am currently working with to try to resolve the vibration ( not the dealer I bought truck from). There has been a lot of good feedback on this forum and I will be sure to keep everyone posted on the outcome. Mine is 2014 6.2 sierra SLT crew cab with short bed, and z71. Dealer has a GM tech on staff and they are focused on exhaust system...more specifically the flapper valve in the exhaust. I will post more complete details as soon as they are done, including the dealer info and work done. GM is aware of this issue and they have been willing to work with this dealer to explore different angles. So at a minimum GM is not in denial. I think the big difference people are having in terms of response is predicated on the dealer and dealer service departments competence and relationship with GM. Fingers crossed.

Posted

When I got my 2008 an empty bed going down the freeways of Los Angeles was teeth rattling. My 99 21500 with a topper rode much nicer. I just happened to check the (blurry) rear view mirror and caught the top of the tailgate bouncing like a paint shaker. A 200lb topper and 200lb set of bed drawers and it rides completely different. I'm not saying that's what most of you are experiencing. But its something to look for.

 

I was chasing a vibe in my 99 and found pulling the front (4x4) drive shaft cured the vibe that I was getting when in 2wd at freeway speeds. Their is enough friction in the transfer case that the front shaft ends up turning even when in 2wd. Guys on this board chased similar vibe years ago.

Posted

So dealer tried to give me another truck yesterday. It shook worse than the one I have now so I didn't accept it. They said that's all they can do. Mine was built 11/13. The one they wanted to give me was built in 7/13

 

Sent from my HTC One using Tapatalk

 

 

Posted

So dealer tried to give me another truck yesterday. It shook worse than the one I have now so I didn't accept it. They said that's all they can do. Mine was built 11/13. The one they wanted to give me was built in 7/13 Sent from my HTC One using Tapatalk

Wow, that sucks...
Posted

So dealer tried to give me another truck yesterday. It shook worse than the one I have now so I didn't accept it. They said that's all they can do. Mine was built 11/13. The one they wanted to give me was built in 7/13 Sent from my HTC One using Tapatalk

Wow, that sucks...

 

Sure does. Guess it will b lemon law eventually.

 

Sent from my HTC One using Tapatalk

 

 

Posted

Received a call from the GM rep I was dealing with. They are saying it is characteristic of the truck to vibrate and they can't do anything for me wtf they have definitely lost a customer for life once I get rid of this POS

 

Sent from my HTC One using Tapatalk

 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I had an 88 K1500 with a 5.7 that had those symptoms, I know totally different, it ended up being the ECM. Once you get the fuel system fixed if it still runs lousy you may want to investigate that. it didn't set any codes, stalled ,ran rough at times etc
    • Congratulations Isttype, on your gmc. Really like my 2024 2500hd sle doublecab now with 85,500 miles.  I checked the oil today at 4800 miles since last oil change and barely reading on the stick.  I don't care if GM says it's Acceptable adding a quart every 2000 miles because that is 100% BS, It is not a 1966 Harley Shovelhead! Sounds like it's setting up a future failure like I had with my 1500 6.2l. Other than oil consumption problems, I really like the 6.6l gas and 10 speed is really nice.  Towed a light 4000 pound trailer last week and averaged 14 mpg.  I was pretty impressive that a 7300 pound gas truck did 14mpg towing, Later-
    • Long Term Cold Cycle Limited Testing   Back to the 1990's and XOM's million mile test. Since then there have been others and there will be more. Schaeffer's, AMSOIL to name two. Of these Schaeffer's is the stand alone which I will explain in a bit later.    http://papers.sae.org/600190/:   http://papers.sae.org/850215/:   Up to 75% of  engine wear occurs on cold starts. These two links (above) provide the technical reasons for engine wear. In a nut shell, and by a large margin, cylinder wear is what takes out most motors and even with a pre-oiling system that part of the engine is dry enough on cold starts and cold warm up to pierce Stribeck.   So when you put a motor, or a car, on a dyno for a million miles stopping only for oil changes, (yes fuel is uninterrupted) or break down maintenance, you are depriving the test of the most important part of it's wear cycle. Yes a million is then a pretty easy walk even for a mineral oil under those conditions.    How about cleanliness during the long test cycles? Same thing. Varnishes that stick rings and insulate parts are laid down by repetitive 'heat cycles'. It's the cool down the precipitates the varnishes. These long runs also hinder acidic attack caused by cold start richness and less than optimal cold start ring sealing. They hinder water formation and enhance breathing of the crankcase; the petri dish of acid formation, the first step in sludge formation, amalgamation and precipitation. These motors are also monitored and controlled for water and oil temperatures to within the "normal operating range".      https://www.swri.org/sites/default/files/sequence-iiih-test.pdf Note the test sequence in some boutique oils literature for testing, API IIIH, is not the standard used for the ILSAC G7 testing. Does that mean it is irrelevant? No, not as used. As used as a 'visual guide' it makes it's point. The G7 weighted piston deposit minimum is lower.      Back to Schaeffer's. That was a cyclical test of an engine in fleet service and not a dyno mule and if you saw the video it was not mirror clean but wear was low.    There are oils like BioSyn and other 'Renewable" source oils that taught cleanliness and have proven themselves in fleet testing. Havoline an other example.    The newest ILSAC G-7 test prioritize cleanliness, LSPI mitigation and fuel economy OVER WEAR. In comparison Porsche C30 Specification Verses ILSAC G-7 Specification below:      Some will balk that this graph isn't apples to apples and I will challenge that in that this graph represent the SPECIFICATION and not the any One Oil Performance.   It is absolutely possible to minimize wear, maximize cleanliness and mitigate LSPI etc., It just isn't cheap and currently I see none that are not walking toward profit over performance.     
    • I don't think you will need a split, separate product, etc., the OBD port should be able to deliver everything you need. Since your device would be plugged into it all the time, it wouldn't miss anything.    Hardware in this case will be the easiest part of your project - ELM 327 devices will already deliver all the data you need. Reporting/software is where your advantage/marketability is.
    • I do too. I’ll never be stuck again 😂
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...