Jump to content

Recommended Posts

Posted (edited)

GM doesn't put Bilsteins on any vehicle they make and Bilsteins aren't crappy either. They're one of the best shocks you can get actually.

 

The current Z71's come with monotube Ranchos. Everything else comes with Tennecos. Tenneco makes Rancho and Monroe shocks. I'm not 100% sure but I think the Z71's are the only shocks that are monotube design. The rest of the trucks are twin tube design.

 

And to answer the original question, no Bilsteins aren't available for these trucks yet. Hopefully they come out soon though.

 

 

The Corvette has Bilsteins. One other car according to Bilsteins website.

 

Here is a site that did a breakdown of the Stingray.

 

http://gmauthority.com/blog/2013/01/deep-dive-the-chassis-of-the-2014-corvette-stingray/

Edited by HDNitehawk
Posted (edited)

 

 

It was phrased correctly. I just didn't know Bilstein had sent you their 2014 shocks and that Chevy had called you to inform you of where they bought the shocks for the High Country.

I will wait until they call me and tell me who the manufacture of the shocks really is, then claim that company makes "Crappy" shocks. Although there is no name on them and they are the same color as ThyssenKrupp's logo. Maybe that is a coincidence.

Just LOL, you must be a teenager.

 

Back on topic. Maybe a fix for this terrible vibration will be found.

Edited by Pinnacle
Posted

Just LOL, you must be a teenager.

 

Back on topic. Maybe a fix for this terrible vibration will be found.

 

I wish. If I were I wouldn't think twice about a vibration in my truck.

 

Side note to all this, about the Rancho shocks you linked I asked the same person that told me Bilsteins were on the High Country if the Rancho would work. They told me no. I called Rancho up and asked them about it, if you notice it says it will not work with the Z71. I asked them if it would work with the High Country, they tell me it will. I have put quit a bit of research in to this already as I want to smooth the ride. I intend to talk to a few 4x4 shops and see what they think. One has already told me that I would be going backwards with the Rancho's over the stock shocks on the High Country. The thing is I do not want to do any of this until the vibration issue is fixed, if I do it now it just gives GM another reason to void the warranty.

 

I doubt they fix most of the vibration issues. GM will just convince everyone that is the way trucks are supposed to drive. If you read all the posts you find a few that found a fix however most the problem never goes away.

Posted (edited)

And what are they if they are dark blue. No name on the shocks at all.

Pretty sure they're Monroe's. Again GM doesn't manufacture any of their vehicles with Bilstein shocks from the factory. Maybe the stingray has them but not their other cars and trucks. Edited by Silverado-Hareek
Posted

I wish. If I were I wouldn't think twice about a vibration in my truck.

 

Side note to all this, about the Rancho shocks you linked I asked the same person that told me Bilsteins were on the High Country if the Rancho would work. They told me no. I called Rancho up and asked them about it, if you notice it says it will not work with the Z71. I asked them if it would work with the High Country, they tell me it will. I have put quit a bit of research in to this already as I want to smooth the ride. I intend to talk to a few 4x4 shops and see what they think. One has already told me that I would be going backwards with the Rancho's over the stock shocks on the High Country. The thing is I do not want to do any of this until the vibration issue is fixed, if I do it now it just gives GM another reason to void the warranty.

 

I doubt they fix most of the vibration issues. GM will just convince everyone that is the way trucks are supposed to drive. If you read all the posts you find a few that found a fix however most the problem never goes away.

Are the HC shocks yellow or silver? Bilstein name on them? IF not, Doubt they are Bilsteins or GM would have the name all over them. On the Z-71 years ago they put the yellow bils on, I think. Not now.

 

If you want good shocks buy the Bilstein 5100s.

Posted

GM has been using Tenneco for shocks.

Posted

New driveshaft installed this morning and steering wheel vib is still there. Think I'll wait until tomorrow morning to call dealer back, this is getting frustrating.

 

 

Sent from my iPhone using Tapatalk

Posted

MY update....I was having vibration at 70 plus that seemed to get worse with temperature. The dealer replaced two Good year tires I had that Road Forced highly. After the tire swap, there'a a world of difference but at this point I dont think the whole problem is solved. It's livable now so my issue seems to have been largely tire related. I cant help but wonder if I swapped the other original Good Year tires maybe the truck would ride perfect. Has anyone thought that maybe, these trucks just drive poorly? I think I'm being very sensitive to every little wobble now due to this thread, but maybe these trucks just stink. I mean, between the trans always trying to shift to a gear for the lowest possble rpm, the V4, the frame, the aluminum shaft and steering parts, and the crappy tires...maybe this is as good as it gets? I dont know...if I never saw this thread ...with the way my truck drives now I'd probably chalk it up to "it rides like a truck" and not worry. It seems like, from what I read here so far that....nobody has gone from troubled to fixed by having parts swapped out. After a year, if there was a specific problem I would think Chevy would know exactly what to swap to correct the issue...ya know? I think these trucks just drive poorly to the sensitive driver, and fine to the ones who arent as sensitive. Maybe?

Posted

New driveshaft installed this morning and steering wheel vib is still there. Think I'll wait until tomorrow morning to call dealer back, this is getting frustrating.

 

 

Sent from my iPhone using Tapatalk

It looks like they should have replaced the rest of the truck around your old driveshaft.

Posted

Good News!

After a month of tire balancing,changing the wheels and driveshaft, my 40 to 65 mph steering wheel vibration is finally gone and the truck drives smooth.

Gm recommended the dealer inspect the rearend for excessive runout in the ring gear.

They found no side bearing pre-load and excessive runout from ring gear.

They replaced ring and pinion and bearings, also says something about a shim kit on paperwork.

I'm finally happy with the truck.

  • Like 1
Posted

MY update....I was having vibration at 70 plus that seemed to get worse with temperature. The dealer replaced two Good year tires I had that Road Forced highly. After the tire swap, there'a a world of difference but at this point I dont think the whole problem is solved. It's livable now so my issue seems to have been largely tire related. I cant help but wonder if I swapped the other original Good Year tires maybe the truck would ride perfect. Has anyone thought that maybe, these trucks just drive poorly? I think I'm being very sensitive to every little wobble now due to this thread, but maybe these trucks just stink. I mean, between the trans always trying to shift to a gear for the lowest possble rpm, the V4, the frame, the aluminum shaft and steering parts, and the crappy tires...maybe this is as good as it gets? I dont know...if I never saw this thread ...with the way my truck drives now I'd probably chalk it up to "it rides like a truck" and not worry. It seems like, from what I read here so far that....nobody has gone from troubled to fixed by having parts swapped out. After a year, if there was a specific problem I would think Chevy would know exactly what to swap to correct the issue...ya know? I think these trucks just drive poorly to the sensitive driver, and fine to the ones who arent as sensitive. Maybe?

 

If these trucks just ride like crap - I would know it by now. I've put almost 3K miles on it and it still rides as smooth as bees knees. I am friggin amazed at how smooth the ride is and couldn't be happier. And looking at that post above makes me happy for him that they finally found his problem. Pumkin problem for him. Sucks for him but fantastic that they fixed it. Fecal matter happens

Posted

I also had a 40+ steering wheel vibration. Weeks of investigation. New rear axle from factory and the ride is much better so far.

 

 

Sent from my iPhone using Tapatalk

Posted (edited)

I would think that if adjusting tire pressure changed things, then tires are where the problem is. Temp and tire pressure changes my issue, and so did a balance. They're changing two tires out that road forced highly..so we'll see. This thread can definately get your mind going...so dont rea too much into things if you can avoid it. I will say that, these trucks are extremely rigid and telegraph every bump and road crack straight to the driver...so take that into consideration. The tech that I took on a drive felt my issue, and admitted that lately GM is asking drivers to just keep on driving to 10000 miles as they're hoping things soften up. He told me that's their offical word for several ride related issues. They pushed to get me two new tires....I'm really hoping they solve my problem.

 

Found out my dad's friend, who has a 2014 Z71 LTZ Crew Cab, Long Bed, 3.42 axle ratio with 16,800 miles has a vibration at 70+ mph.

Edited by Silverado-Hareek
Posted (edited)

I am still pretty surprised how long this thread has gone on and still nobody has taken their truck to a driveline shop to at least have the driveshaft and yokes inspected to have the opinion of a third party expert on the matter. I was in the same boat with my first truck though and was hoping they could fix it but they never could and wound up buying it back. They checked every spec in the rear end and it was all within tolerance but one thing they didn't do was the shaft. We could kill a few birds with one stone per se on whether it could be could the balance, yokes not welded on straight, or the aluminum shaft debate about it warping etc. As stated before I would volunteer mine but I have already been down the path of having my truck torn completely apart before the buyback and am trying to avoid it with the new one until I can pinpoint the issue. Thanks in advance to anyone who has theirs checked and reports back; if nobody does in the near future I might go ahead and do so. Hopefully we can fix it or rule it out completely!

 

 

Sent from my iPhone using Tapatalk

Edited by hotrodz37
  • Like 1
Posted (edited)

MY update....I was having vibration at 70 plus that seemed to get worse with temperature. The dealer replaced two Good year tires I had that Road Forced highly. After the tire swap, there'a a world of difference but at this point I dont think the whole problem is solved. It's livable now so my issue seems to have been largely tire related. I cant help but wonder if I swapped the other original Good Year tires maybe the truck would ride perfect. Has anyone thought that maybe, these trucks just drive poorly? I think I'm being very sensitive to every little wobble now due to this thread, but maybe these trucks just stink. I mean, between the trans always trying to shift to a gear for the lowest possble rpm, the V4, the frame, the aluminum shaft and steering parts, and the crappy tires...maybe this is as good as it gets? I dont know...if I never saw this thread ...with the way my truck drives now I'd probably chalk it up to "it rides like a truck" and not worry. It seems like, from what I read here so far that....nobody has gone from troubled to fixed by having parts swapped out. After a year, if there was a specific problem I would think Chevy would know exactly what to swap to correct the issue...ya know? I think these trucks just drive poorly to the sensitive driver, and fine to the ones who arent as sensitive. Maybe?

 

Ive been wondering the exact same thing, that this is just how they are. Ive driven 3 now, mine, the loaner, and an identical z71 off the lot with 4 miles on it. They all feel about the same at speeds up to 70. There is steering wheel and seat vibration, I wonder if Im now just hyper sensitive to every little bump and if it actually is normal. I would love to drive somebodies truck that says its "smooth as glass".

 

One difference however is i have a vibration and noise associated with speeds above 72 that is different on mine. But if thats fixed I guess I may be ready to call all the other vibrations normal since every 2014 Ive driven feels that way.

Edited by Aboothlsu

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Sad thing is that this doesn't have to be the case. LSPI can be solved without a reduction in TBN. Swap Ca for Mg.  Cats are not a issue if the OEM can get a ring and valve guide seal even at SN levels of SAPS. Dizzy is purring like a kitten with a bowl of warm milk. 200K of Full SAPS oil and zero detonation issues and nice a clean inside and out. This shouldn't be an issue. It isn't 1920.    Tell ya what AMSOIL SS is excellent at, internal cleanliness. The new formula is even a step up from their already outstanding cleanliness levels. Can't say the OEM offering is quite that clean. There marketing suggest the SS is cleaner.     That is the only defense with at shelf oil. Nothing wrong with them if you ignore the marketing and OEM 'recommended' OCI and use a thimble full of common sense. 😉 You go sir. 
    • I started with a folding cover by BAK PAC on my 2500. It went bad after close to 5 years. Bent and vinyl coming loose. Contacted BAK and they gave me a very good discount on a Revolver. Had it a number of years. Mostly outdoor storage. Some garage storage. Vinyl started to come loose. Still under warranty so they replaced to cover. Sold the 2500, bought the 1500 and got another revolver for it. Had it a couple years now and no issues. I store it indoors. Got a bit of discount when buying it as well. If you are seeing problems, contact BAK or real truck and let them know. Customer service was pretty good. But I think they changed their warranty.
    • I agree, there is no one answer fits all as every rig is different, one may be pulling some little aluminum fishing boat while another is towing a monstrosity that weighs a lot and hopefully the owner if the rig has some prior experience to know what drive mode they should choose.    It also struck me and this is from watching a few of those boat ramp escapades videos in the past, Ford being one of the vehicles that has the auto front axle hubs and sure enough its found out that one hub has crapped out and won't engage and may not have manual hubs to even select on both sides so they are on the boat ramp stuck with no four wheel drive and spinning .... they flat out need a tow to get up the ramp and deal with the vehicles new found issues. That can happen to all brands of pickup, finding out either four wheel drive or 4 low isn't working right at the time its needed it to work as some electronic crap has failed. 
    • Its possible you never had the joy of the crappy boat launches we tend to have around here or really some of them are just grades down to the river if its a river scenario and the conditions change all the time with the river levels and silt deposits. Some of the lakes we went to years ago, there was no such thing as a cement pad that went down into the water that the trailer stayed on, it was gravel maybe up to the water line and then duck crap much beyond that so sinking the boat tires into mud. Of course some of the more established lakes had a cement bar type boat ramp but sometimes it was covered in green slime closer and certainly within the water and a two wheel drive had all sorts of fun if one had to touch that slime with the rear tires.    A neighbor of mine had made a comment years back with his chev truck that was probably about the same year as yours but a half ton extended cab 4x4 and he a a fiberglass boat with an inboard so it wasn't a feather weight and he had gone out to one of the large popular lakes in the area and don't ask me how this happened but he was in two wheel drive as he figured he didn't require four wheel drive for that boat ramp and somehow upon pulling the boat out he twisted one of his drive axles. I suspect it must have spun and then grabbed on the cement ramp and shocked it to the degree of twisting it. He would have had the standard 8.5 or whatever it was axle housing as the 9.5 ring gear like my truck has also has larger drive axles as far as I know. Anyway he was feeling a vibration driving home and had it checked out and a shop found that the tire/hub was wobbling because of the axle had twisted so in went a new drive axle. After that bad experience he said he made sure to put it into four wheel drive to lower the stress on the rear axle. Of course that is where an HD truck can handle a lot more stress and no doubt these newer half tons with their larger ring gears probably have larger drive axles as well to match vs back in the day. 
    • Desirable - as in does someone WANT one, aspire to have one. Could reasonably buy any car they want and CHOOSE these instead.    I didn't watch the video, why did they win?
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...