Jump to content

Recommended Posts

Posted

Well, my days as a GM owner are officially done. I was shaking my head on the way to the dealership or maybe it was just the vibration :nopity: . I traded my truck for a 2016 Ford F150 Lariat 4WD Crew Cab with 6.5' box. I tried, but no more GM's in my lifetime.

 

-1995 Chevrolet Silverado 2WD - It started bucking and jerky randomly when warm. The mechanics could not find anything wrong after 6-10 visits. I was already outside the 3/36 and 5 year period (73,000 miles). Service manager told me to trade it on a good day which I did the next week.

-2001 Chevrolet Silverado 2500HD 4WD 6.0L gas - Lemon lawed at the 3 year point. I started the process at about 2 1/2 years.

-2015 GMC Sierra 1500 4WD - Traded

I will check back on a more infrequent basis, but wanted to get ahead of the AutoGuide article assuming it affects resale values.

  • Like 1
Posted

point blank the problem is frame/body intensifies all the little imperfection. I am a GM employee and they warned us before the trucks even hit the road about the vibration. I should have listened but thought it couldn't be that bad. Boy was I wrong.

Posted

I thought I was lucky when, last year, the dealer balance my tires and my 2014 Sierra SLT stopped shaking. Recently it began again but in the 75-80mph range (18k on the odo). The dealer's mechanic says he cannot reproduce my concern and the dealer says they won't operate the vehicle at that speed. Take any Turnpike or Parkway in New Jersey and 70-75mph is the speed traffic is moving (65 mph speed limit). So unless you want to be the obstruction, you match traffic's speed. Do you think a call to GM customer care would even help?

Posted

My 70-80MPH vibration is eliminated now, after I tightened the factory U bolts on the leaf springs to 80 ft-lbs and the dealer did a road force balance. The U bolts made about 75% improvement and the rebalance took care of the remainder. Now it is smooth and vibration free. I've put about 500 miles on it and it seems to be holding up. Fingers crossed it doesn't come back.

  • Like 2
Posted (edited)

Went to my new servicing dealer today and took the shop foreman for a ride and discussed all of the issues with the truck... Guess What... HE AGREED WITH ME!!!!!

 

He even admitted that they currently have a few other pick-ups there for the exact same problems and that he has personally helped a good number of other people fight to get a buy back. He and I discussed all of the different scenarios make the vibration worse such as going around a curve, up a hill, temperature differences etc. We also discussed different parts and what we believe the root cause to be, he actually said that he believes that the frames on the trucks are not 100% true, and that the truck is fighting the frame while driving, in addition to the stiffer frame and changed material for the mounts causing all of the resonances to be transferred into the vehicle, he actually called the truck a "tuning fork" lol.

 

According to him, I definitely have the T1 Vibe, possibly a T3 and Prop... hopefully I am remembering this right... I was also able to get him to listen to the issues I have with my radio as well, again he agreed that the radio definitely has problems. However he said hes NEVER seen, let alone heard of the problem I have, where it will randomly lose all of the highs in the audio and fade, the only issue he has seen was with the reception and HD Tuning, and my truck doesn't have HD.

 

Anyway, they are going to call me when they get a loaner vehicle back, to so they can schedule it for me, they will be taking my truck in either this Monday, or next Monday, I am also going to bring my 18" wheels with me so they can run the Picoscope on those aswell, even though I have had every intention of switching the tire to something that is better for A/T... yes I am still arguing with them about paying for and not receiving A/T tires...

 

Now the kicker for anyone with a '14... The foreman told me that when GM ordered the rear ends from American Axle, it was a late order, so AA started just cranking them with little quality control, he then went on to say that they never changed the tool kits when manufacturing them... the tolerances turned to sh*t, and the more they produced, the worse they got... So anyone with a '14.... that could be part of your problem, he was telling me about one truck they had , it registered 56 on the Pico, GM somehow determined that 22 was the threshold. they overhauled the original rear end, then ended up replacing the entire assembly. They obviously did not fix that truck and it was one of the buy backs that he helped with.

 

I asked him if he knew how GM came up with the 22 spec for the reading on the Pico, because that is still a felt vibration, and quite honestly for the amount that we pay for these trucks, any vibration like this is bullsh*t. he said he didn't know where GM came up with that spec, but agreed that if he was a consumer and had purchased one, he'd feel the same way.

Edited by Jesse D
  • Like 2
Posted

Went to my new servicing dealer today (xxxxxxxxxxxxxxxxxxxxxxx) and took the shop foreman for a ride and discussed all of the issues with the truck... Guess What... HE AGREED WITH ME!!!!!

With all the negative talk about GM your dealer agreed to, his business sounds pretty tight so stick with him. But you may want to go back to your post and delete his dealership name, GM might just give him a call.

  • Like 1
Posted

With all the negative talk about GM your dealer agreed to, his business sounds pretty tight so stick with him. But you may want to go back to your post and delete his dealership name, GM might just give him a call.

good call, thank you

Posted

Well, my days as a GM owner are officially done. I was shaking my head on the way to the dealership or maybe it was just the vibration :nopity: . I traded my truck for a 2016 Ford F150 Lariat 4WD Crew Cab with 6.5' box. I tried, but no more GM's in my lifetime.

 

-1995 Chevrolet Silverado 2WD - It started bucking and jerky randomly when warm. The mechanics could not find anything wrong after 6-10 visits. I was already outside the 3/36 and 5 year period (73,000 miles). Service manager told me to trade it on a good day which I did the next week.

-2001 Chevrolet Silverado 2500HD 4WD 6.0L gas - Lemon lawed at the 3 year point. I started the process at about 2 1/2 years.

-2015 GMC Sierra 1500 4WD - Traded

I will check back on a more infrequent basis, but wanted to get ahead of the AutoGuide article assuming it affects resale values.

 

How bad of a beating did you take? My second buy back truck is ordered and I'm thinking of driving it straight to the Ford dealer as soon as it comes in. I had one Ford dealer tell me he really wasn't interested in my first buy back.

Posted

How bad of a beating did you take? My second buy back truck is ordered and I'm thinking of driving it straight to the Ford dealer as soon as it comes in. I had one Ford dealer tell me he really wasn't interested in my first buy back]

 

I went from a 2014 taken back by GM to a 2016 and can't believe the improvement. Almost everything works better on the 16. The engine is much more responsive, no clunk, home link has longer range, seats tight, paint great.... I could go on but it's just much better including fit and finish.

My only issues are minor except-I had a scare when I noticed rough roads at about 80 gave my truck the shakes. Turned out it was from the spring U bolts not torqued to spec, 40 vs 78. My Android Auto was acting up but has been solid since the recent phone update of AA. I'm down to one minor issue-some wind noise from driver side. I can see that the door is slightly out from the body so maybe just need to move the door latch in a tad. I'll let the dealer take that one.

If your new truck is anything like mine you won't want to trade.

Posted

Any experiencing the vibrations on 2016s? Can't imagine they changed much on that model year?

Posted

My 14 was flawless, zero issues, traded it last may for a 15 Sil. vib in it was bad, put tires on it in Sept, balances, rotated driveshaft, no change. In Dec they buy backed me into a 15 Sierra, same vib but not as bad as the Sil. In Jan I ordered a 16 Sierra which I'm waiting for. People are still getting the vib with 16's and after a year of this I'm about at the point of washing my hands of GM and moving on. I've known my dealer my whole life and he has really stepped up for me, that's the problem for me.

  • Like 1
Posted

My 14 was flawless, zero issues, traded it last may for a 15 Sil. vib in it was bad, put tires on it in Sept, balances, rotated driveshaft, no change. In Dec they buy backed me into a 15 Sierra, same vib but not as bad as the Sil. In Jan I ordered a 16 Sierra which I'm waiting for. People are still getting the vib with 16's and after a year of this I'm about at the point of washing my hands of GM and moving on. I've known my dealer my whole life and he has really stepped up for me, that's the problem for me.

Yeah..my 16 shakes from 72-75 and up. Pretty unhappy about it. Under 70 it is super smooth. Wheels have been balanced twice. I don't think it's a wheel thing because it seems to change in intensity and location every time I drive.

 

Sometimes it's in the steering wheel at 74 mph. Sometimes the seats are shaking at 75. Sometime it's the whole truck. Really odd. It seems to have gotten worse. Just hit 3k miles.

 

I'm going to ask for a road force balance and hopefully it'll be better.

 

Pretty sure the GY SRA'S are crap. But then again, I'm pretty sure it's in the drive line.

 

Man...38 years buying Japanese vehicles with little or no issues.

 

Really shot myself in the foot here buying American. Between the clunky transmission, the shuttery shifts, the tin can exhaust, the whining tires, and high speed vibrations, this is not a pleasurable vehicle to own.

 

This may be my worst ownership experience. Too bad it's such a great looking truck. I thought the Tundra was butt ugly. I guess I'll take ugly and smooth over pretty and shitty.

  • Like 1
Posted (edited)
paxtonman, on 02 Apr 2016 - 5:29 PM, said:

 

How bad of a beating did you take? My second buy back truck is ordered and I'm thinking of driving it straight to the Ford dealer as soon as it comes in. I had one Ford dealer tell me he really wasn't interested in my first buy back.

Not as bad as I expected.... my GMC truck stickered by 54800, purchased for 43800 through a military buying program, traded for 38500 after a year and 9400 miles. The new Ford stickered for 61200, bought for 52500, but it has every possible bell and whistle that the GMC was missing despite having every package option installed.

 

38500 trade was the high end per KBB for my truck, so I couldn't have expected more. The most important thing is that Washington state has a 9.2% sales tax on new vehicles. I needed to sell the truck for 42042 just to break even on the sales tax savings gained by trading. It is almost always better to trade a well kept newer vehicle in Washington versus selling it privately just due to sales tax. A $50000 truck without a trade is an additional $4600 in sales tax.

 

I can at least write off the sales tax on my federal tax return next year since Washington does not an income tax.

Edited by GMCSierra4x4
Posted

"I guess I'll take ugly and smooth over pretty and shitty.

"

 

Sounds like the makings of a good Country song to me :)

  • Like 2
Posted

"I guess I'll take ugly and smooth over pretty and shitty.

"

 

Sounds like the makings of a good Country song to me :)

lol, first time I think I actually liked a post you made

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I'd change the fluid and start there.   198F is nothing for the 8L90.  They typically operate 180-200F stock.  
    • Looking for help!   2019 GMC Sierra 1500 - 5.3l 4x4 8l90 61k miles - truck is in Arizona, was over 110 outside on Monday when this whole situation transpired. Never had any major issues with transmission until this point:   Truck sat outside my construction office for approx 1 hour idling before I realized, ran around the job site wrapping some things up for the day and then left. Went to get food and sat in the drive through for approx 30 minutes idling. As soon as I pull out of the drive through and onto the main road, rear tires lock up and feels like transmission fell out of the truck. Shifted to park, shut the truck off and tried again, same thing happened. Was able to reverse into parking lot (truck slammed into reverse). Let the truck sit turned off for 10 minutes before trying again, but it continued to happen. Towed truck back to my house. Highest the trans temps reached was 198.   Friday, after work I start looking into the situation. Truck sat in my driveway untouched all week. Truck is now driving like normal, transmission doesn’t get over 185 degrees when trying to heat it up. Got up to 60 multiples times with no issues, no issues accelerating, only down shifted hard into first one time at 185 degrees. Does anyone have any insight? Never through a code or a check engine light. Truck has never been used to tow either. No transmission services at this point.
    • Atlas won.   I know better, but I did it anyway. I took a compressed air line with a chuck and rubber tip and jammed it in the open EGR port. The port was clear as far as I could see, and as far as I could poke with a flexible wire, but that doesn't mean it's not clogged.   Compressed air blew back at me along with a cloud of black. Oops. I didn't have the rubber tip seated in there all the way. Jammed it up in there some more and squeezed the chuck. PSI was set to 120. Poof! It blew back at me again. Third time...pfffffttssssssspffffffsssfffffff, face full of carbon, and then, kind of a thud..and the air stopped spraying back at me. It was now exiting the exhaust with a low shhhhhh sound as it flowed through the pipe. Something broke free. I pressurized the port again, and air flowed.   Made my day.   Long story short on this problem, it's fixed. Something was really blocking the EGR passages down low, and compressed air blew it apart. I don't recommend this as who knows what debris was sent where. But it's allowed me to move forward, mentally, and onto the next problems I need to get this little S-Blazer going down the road properly again.  
    • Your truck lowered, looks good. I'm happy with the stance on this. I may need the extra ground clearance given my location/situation.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...