Jump to content

Recommended Posts

Posted (edited)

',,,,,,,,,,,,..........................???????????!!!!??!???!?!,..;::: Put them where you need them JA

Edited by 300ktm
  • Like 1
Posted

',,,,,,,,,,,,..........................???????????!!!!??!???!?!,..;::: Put them where you need them JA

 

 

seriously, too hard to read without any punctuation. really...who does that?! Then, you call the other guy a JA for pointing out the incoherent paragraph?

Posted

seriously, too hard to read without any punctuation. really...who does that?! Then, you call the other guy a JA for pointing out the incoherent paragraph?

 

i didn't know this was a English class if it's to hard to read for you then don't read it im trying to help others out that have the problems that I did I'll take the post off so you none reading ****s can be happy
Posted

Reading through this thread (whew!), it seems that most people got their trucks stock with GoodYear tires. I wonder if the choice of tire is a regional thing or what.

I just bought a 2015(.5 I guess) GMC Sierra SLE. It is Crew Cab, 4X4, 5.3, 1K miles so far. It came stock with Bridgestone Dueler tires. I live in the Northern California area.

So far, I have not noticed any unusal vibration at any speed (knock on wood), or V8/V4 mode. I am concerned by the extent of this vibration problem though. I only came across this forum because of a reference on the Chevy Traverse forum because I also have a 2010 Traverse that just had the timing chain TSB done (that apparently is another GM horror story). It also came with Bridgestone Dueler tires.

So, I will continue to follow this thread and hope I don't end up with the vibration problem.

Posted

Has any updated to Bilstein (or any other) shocks and fixed the vibration issue?

 

I am curious about this as well. I read on another forum where they did upgrade to bilsteins and it fixed the vibe. Its a cheap fix for rear shocks at about $160 for the two rears.. Even if it doesn't fix it, you will still most likely have a tad bit better ride. Might be worth a shot.

Posted

I also read this on another thread.

 

I have stock OE shocks not ranchos. With these stiffer frames they may not do to well at dampening out all the extra frame harshness or drivetrain harmonics.

Posted (edited)

Has any updated to Bilstein (or any other) shocks and fixed the vibration issue?

 

I have the random 70-75mph vibe on smooth highway and yes i did install Bilstein 4600 HD's on all 4 corners,It did'nt cure the random vibes but it rides so much better than the OEM (black) shocks and struts.No more bouncy bumps,Bilsteins were $325 and i installed them myself.The difference in dampening is night and day.Again this did NOT solve my random vibes at highway speeds,but eliminated the bouncy ride.

Edited by zachybean
Posted

300ktm just posted yestetday that he put Michilen tires, Gabriel ultra shocks on the rear along with balancing the drive shaft and it was better.

 

Thanks zachybean for confirming also.

 

So it sound like properly balancing the tires and drive shaft and putting some quality tires and shocks on can make a difference in taming the vib.

 

I still think this is masking the origional problem though.

Posted (edited)

Editing post. I disabled AFM (v4) a few days ago and after my morning commute today I can surely confirm I still get the random skakes at higher speeds that come and go. The vibration I was feeling in the gas petal I thought at first seemed less intense with AFM off but after today I don't think it is. I also feel a steering wheel vibration more so than I did before my truck was in for service last week. Seems like maybe them remounting and rebalancing the tire could have made it worse. Somewhat frustrating. Does this amount of weights in the wheels fall into the normal range? post-138443-0-09938200-1434114012_thumb.jpg

post-138443-0-09938200-1434114012_thumb.jpg

post-138443-0-09938200-1434114012_thumb.jpg

post-138443-0-09938200-1434114012_thumb.jpg

Edited by mjj
Posted

@ kchaggins - That is the most ridiculous comment I have ever read, If it's not your concern, why bother write 5 paragraphs.

 

I paid (or am paying) for a $44,000, "Professional Grade" truck, I don't expect it to drive like BMW or handle corners like a Corvette, but it should not be vibrating. As for the "mpg" , most truck owners don't buy the vehicle for gas mileage efficiencies. That is a government mandated number that the manufactures must meet. Thankfully this model can be switched to V8 mode, minus 6th gear, by method described by 'EastCoast HD' in previous post.

Thank you 'EastCoast HD' for confirming this feature, I thought that there was something wrong with the "manual mode' , as I was trying different gears to check for the vibration issues.

On a seperate note, I also noticed the "traction control" doesn't actual shut off. Or it does, but the " stability Track" stays engaged to prevent the rear end from breaking loose above ~ 30mph or from coming around, preventing the "power slide" or "donut" horse play. Again a mandated "safety" feature.

Anyway, My 1993 Ford Ranger V6 Ext Cab w/ 4" suspension lift and 33" BF Goodrich never vibrated. I was original owner and installed al the goodies after warranty expired, never had a problem. Goes to show, more technology, more bells and whistles,....more potential problems.

This vibration was noticable when I test drove the truck, but was told it was a"flat spot" on tires from sitting as it was an early model. I called bullshit, and the sales guy said it's all under warranty if there are and issues.. Now they just need to find the cure for the issues.

BTW..I wont let it bother me anymore if 'kchaggins' wants to make my payments, lol....actually it would still bother me, just slightly less

Hi Dcon,

Thanks for the comments and consideration. Since I am not an automotive technician my dissenting opinions are merely opinions and nothing more. To be clear, my comments address 2014, 2015 Silverado 1500’s with low speed v8 to v4 vibration. Keep the comments coming, I’m learning allot.

Posted

this is such a well thought out post you made.

 

I invite you to come share a meal with me where I will prepare tainted meat for you to eat because by your logic, hey you cant expect the things you buy to be quality products or work properly.

 

so come on over and we can chat on the way to the hospital as you enjoy your food poisoning which you think is perfectly normal and reasonable to be subjected to.

 

geez, you have to be a paid shill GM employee trying to spread stupidity in the hopes people are high enough on drugs to swallow your horse manure to agree that their truck are supposed to shake like farm trucks driving across a corn field? tell your GM bosses there aren't enough drugs in the world to make us think these trucks are supposed to shake like that, but then GM will soon be out of the truck selling business because of their stupid handling of this. the word is out and you are becoming know as THE brand to never buy.

 

a quick look at this guys account page shows he joined just to make this one post and never made any other posts, GM public relations employee or just a stupid kid trying to stir up crap for sure

I can’t address all of your comments but I'm not a kid nor a GM employee but I have owned 5 GM products. Now, I am a 2014 Silverado owner. To be clear my comments concern issues pertaining to low speed 40 mph V8 toV4 transition vibrations. I stand by those comments! Raw or not I call it like I see it.

 

That said, my Silverado also has the dreaded high speed vibration. Today I picked up the phone and call some of my Dealer contacts and they are being made aware of this condition impacting a limited amount of 2014, 2015 Silverado’s. Procedures are in place for a fix, however, successful repairs are dependent on technician training, equipment upgrades and Dealer due-diligence apparently not consistent among dealerships. Monday my truck goes in for servicing. I will keep you informed of the results.

Posted

I guess this is GMs way of doing a little damage control. Lol, what a joke!!

I can’t address all of your comments but I'm not a kid nor a GM employee but I have owned 5 GM products. Now, I am a 2014 Silverado owner. To be clear my comments concern issues pertaining to low speed 40 mph V8 toV4 transition vibrations. I stand by those comments! Raw or not I call it like I see it.

That said, my Silverado also has the dreaded high speed vibration. Today I picked up the phone and call some of my Dealer contacts and they are being made aware of this condition impacting a limited amount of 2014, 2015 Silverado’s. Procedures are in place for a fix, however, successful repairs are dependent on technician training, equipment upgrades and Dealer due-diligence apparently not consistent among dealerships. Monday my truck goes in for servicing. I will keep you informed of the results.

 

this is such a well thought out post you made.

 

I invite you to come share a meal with me where I will prepare tainted meat for you to eat because by your logic, hey you cant expect the things you buy to be quality products or work properly.

 

so come on over and we can chat on the way to the hospital as you enjoy your food poisoning which you think is perfectly normal and reasonable to be subjected to.

 

geez, you have to be a paid shill GM employee trying to spread stupidity in the hopes people are high enough on drugs to swallow your horse manure to agree that their truck are supposed to shake like farm trucks driving across a corn field? tell your GM bosses there aren't enough drugs in the world to make us think these trucks are supposed to shake like that, but then GM will soon be out of the truck selling business because of their stupid handling of this. the word is out and you are becoming know as THE brand to never buy.

 

a quick look at this guys account page shows he joined just to make this one post and never made any other posts, GM public relations employee or just a stupid kid trying to stir up crap for sure

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Here's the second UOA on my 22 Wrangler with the Ecodiesel. This has 5k miles on AMSOIL Signature Series DEO 5w-40. The first one was dealer installed oil, no clue what it was, the second is what AMSOIL recommended, European FS 5w-40, Most of the Ecodiesel world is showing great results using the European MS 5w-40, I figured I would see how the DEO works. This is using an Ecoguard oil filter. It's my understanding this engine likes to shed aluminum.  We will see. So far I don't think this is too bad.    
    • I'm surprised nobody seems to offer a solution like the start/stop device I put in my new truck. Remembers my setting when shutdown. And while it still starts up in start/stop, it stores/evaluates what mode it was in when shut down and will change it whithin a second or 2 of startup. It'd be nice to have something like that for the DRLs.
    • 2015 Sierra 1500 here. Leaks from the sunroof to front driver side and soaks carpet. How do I fix this? Thanks!
    • I will be doing that for sure, but I need to solve who has/ where I can find a bidirectional scan tool that will support OBD 1.5. I'm kicking myself because I ebay'ed a Snap On MT2500 that I didn't think I'd ever need anymore. D'oh!! I'd rather not buy another, so I'll contact a few local shops to see if they have one and how much they'd want to do the procedure. I'd rather have the ability to do it myself... I wish there was a modern tool that could do it all, but I'd have no idea what to buy.   The theory with the pulled timing is that it mimics a rich condition. The delayed spark causes incomplete burn and the O2 sensor picks up low oxygen levels. That's interpreted as a rich condition so the PCM pulls fuel and that shows up in the deeply negative fuel trims.
    • An ultra wealthy man had the most beautiful daughter. But, there was a problem. Everything she touched would melt in her hands. No matter what, Metal, Wood, Stone. Anything she touched would melt. She could not feed herself. Because of this, men were afraid of her. Nobody would dare marry her. Her father was despaired. What could he do to help his daughter? He consulted doctors, scientists and anybody who could solve this problem. Finally one of them said, "If your daughter touches one thing that does not melt in her hands, she will be cured." He was overjoyed and came up with a plan. The next day, he held a competition. Any man who could bring his daughter an object that would not melt in her hands would be given billions of dollars to marry her. Three extremely intelligent and handsome young men took up the challenge. The first brought a very heavy steel rod, But alas, when the she touched it, it completely melted in a matter of seconds. He sadly went away. The second brought a beautiful diamond, knowing diamonds were one of the hardest substance in the world and would not melt. But alas, once she held it in her hand, it melted. He too was sent away disappointed. So now, there was one left He was very nervous & sweating. He approached the daughter & said, “put your hand in my pants pocket and feel what is in there." She did exactly what he asked. She felt something very hard. She held it in her hand, squeezing it as hard as she could. It did not melt & remained extremely hard. Her father was overjoyed. Everybody was overjoyed. She was finally cured. Nothing never, ever melted in her hand again. They married and they both lived happily ever after, raising a wonderful family. Question: What was in the the groom’s pants pocket??? Answer below ↓ M&Ms of course! They melt in your mouth, not in your hand. What on earth were you thinking?
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...