Jump to content

Recommended Posts

Posted
23 hours ago, Willyone said:

Thanks for that info Pinnacle. My '16 Silverado 5.3 has the shake. Comes in starting in the low 70 MPH range. Is there a part number or item number for the Mobile 1 trans fluid that you mention?

 

Also, can an independent shop do the fluid flush, or does the truck need to be plugged into a dealer/GM computer for a reflash after the flush is completed. I'd like to avoid the dealer if possible due to no to little faith in their abilities.

 

Thanks again

Take that with you to a gm dealerMC-10163890-9999.pdf

  • 1 month later...
Posted

I’m experiencing the same issue 86,000 km 

- lowered air pressure 32PSI … some change 

 

riding on the Denali 22” rims .. feels like it’s in the right front .. then left .. 

 

spoke with a neighbour with a similar truck and advised me that the rear stock brakes grab and transfer the pulse through the aluminum driveshaft to the front and GM has shown him supporting documentation..

 

rotating tires today will update post soon 

also have read transmission service could help the problem 

  • 6 months later...
Posted

I have a 2018 Silverado High Country 4x4 with 128k miles.  It started to shudder just recently.  Definitely feels like the driveshaft is unbalanced, but doesn’t shudder/shake/vibrate all the time.  I have no idea what makes it start or stop.  I had new tires installed, alignment done and even had the wheels rebalanced.  Three different places said the steering and suspension is tight and didn’t find any problems.  I’m hoping GM does a major recall on this problem as I cannot be the only one with the shudder/shake/vibration.  If it’s the driveshaft, why is it happening after,128k miles?

Posted
1 hour ago, Richard Carrillo said:

I have a 2018 Silverado High Country 4x4 with 128k miles.  It started to shudder just recently.  Definitely feels like the driveshaft is unbalanced, but doesn’t shudder/shake/vibrate all the time.  I have no idea what makes it start or stop.  I had new tires installed, alignment done and even had the wheels rebalanced.  Three different places said the steering and suspension is tight and didn’t find any problems.  I’m hoping GM does a major recall on this problem as I cannot be the only one with the shudder/shake/vibration.  If it’s the driveshaft, why is it happening after,128k miles?

Could be that something is just wearing out 

Posted
2 hours ago, Richard Carrillo said:

I have a 2018 Silverado High Country 4x4 with 128k miles.  It started to shudder just recently.  Definitely feels like the driveshaft is unbalanced, but doesn’t shudder/shake/vibrate all the time.  I have no idea what makes it start or stop.  I had new tires installed, alignment done and even had the wheels rebalanced.  Three different places said the steering and suspension is tight and didn’t find any problems.  I’m hoping GM does a major recall on this problem as I cannot be the only one with the shudder/shake/vibration.  If it’s the driveshaft, why is it happening after,128k miles?

You say you had tires rebalanced. But did you have Road Force Balancing done or just traditional balancing? It does make a difference.

Posted
3 hours ago, Richard Carrillo said:

I have a 2018 Silverado High Country 4x4 with 128k miles.  It started to shudder just recently.  Definitely feels like the driveshaft is unbalanced, but doesn’t shudder/shake/vibrate all the time.  I have no idea what makes it start or stop.  I had new tires installed, alignment done and even had the wheels rebalanced.  Three different places said the steering and suspension is tight and didn’t find any problems.  I’m hoping GM does a major recall on this problem as I cannot be the only one with the shudder/shake/vibration.  If it’s the driveshaft, why is it happening after,128k miles?

Do you have the 6 or 8 speed? Have you changed your trans fluid and filter lately?

  • Like 1
Posted
19 minutes ago, Richard Carrillo said:

Not sure which tranny it has.  No, tranny not serviced yet.

Some people have had their trans fluid and filter changed and reported a positive difference in the issue you’re having.

  • Like 1
Posted
On 4/29/2022 at 8:18 AM, Pinnacle said:

Take that with you to a gm dealerMC-10163890-9999.pdf

 

19 hours ago, steelerdude15 said:

Some people have had their trans fluid and filter changed and reported a positive difference in the issue you’re having.

 

19 hours ago, Richard Carrillo said:

Thanks.  I’m planning on taking it to the dealership before I head back to NM.

 

19 hours ago, Richard Carrillo said:

Thanks.  I’m planning on taking it to the dealership before I head back to NM.

There was a TSB that came out around 2016 ~ 2017 for the tranny flush and replacement with Mobil 1 Blue Strip I think it was.  I had it done for tranny shudder problem which it fixed.  It also reduced but did not eliminate low speed hard shift problem between 1st and 2nd.  For some, torque converter replacement was necessary to eliminate shudder.  About vibration problems; I not aware of any single fix for that.  If you read back through the hundreds of posts you find the root cause blamed on virtually every part on the truck.  I don’t think it was ever eliminated from this generation truck which is 2014 ~ 2020 or thereabouts.

  • Like 1
  • Thanks 1
Posted

I had the shake in my 18 Silverado at 45k miles. Chevy dealer replaced the fluid with Mobil One under warranty and shudder completely went away until about a month ago. Just over 90k and intermittent shudder at 40, 50, and 60 mph has returned. Doesn't seem as severe as before. Doesn't happen over 65 mph. Rotated tires with no difference. They are newer Michelins with about 15k on them. Wondering if fluid has separated again? Saw someone mention rotors. Mine still look great and pads are original. Most of my miles are highway. Any thoughts?

Posted
On 1/1/2023 at 10:09 AM, Richard Carrillo said:

I have a 2018 Silverado High Country 4x4 with 128k miles.  It started to shudder just recently.  Definitely feels like the driveshaft is unbalanced, but doesn’t shudder/shake/vibrate all the time.  I have no idea what makes it start or stop.  I had new tires installed, alignment done and even had the wheels rebalanced.  Three different places said the steering and suspension is tight and didn’t find any problems.  I’m hoping GM does a major recall on this problem as I cannot be the only one with the shudder/shake/vibration.  If it’s the driveshaft, why is it happening after,128k miles?

This is certainly not what we like to hear, Richard Carrillo.  Please know, customer satisfaction is extremely important to us. Our team would be more than happy to take a closer look into the concerns with your 2018 Chevrolet Silverado High Country. To do so, please send an email to [email protected] with ATTN: Richard Carrillo/GM Trucks in the subject line.

Please include your contact information, VIN, a brief description of your concern, and the name of your preferred dealership. We look forward to hearing from you. To learn more about GM’s Privacy Policy, please visit https://www.gm.com/privacy-statement.html. The information you provide may be monitored and recorded and is subject to the GM Privacy Statement.
 
Privacy Statement | General Motors
Your privacy is important to General Motors. This Privacy Statement addresses the personal information GM collects and how GM handles that personal information.
www.gm.com
 

Posted
On 1/4/2023 at 4:05 PM, john christ said:

I had the shake in my 18 Silverado at 45k miles. Chevy dealer replaced the fluid with Mobil One under warranty and shudder completely went away until about a month ago. Just over 90k and intermittent shudder at 40, 50, and 60 mph has returned. Doesn't seem as severe as before. Doesn't happen over 65 mph. Rotated tires with no difference. They are newer Michelins with about 15k on them. Wondering if fluid has separated again? Saw someone mention rotors. Mine still look great and pads are original. Most of my miles are highway. Any thoughts?

Is the vibration occurring when you’re accelerating or braking? If it only happens when you’re braking then the rotors are warped and need replaced. If it’s doing it while accelerating, it’s something else.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Holy s**t - not much of a parts thrower you say? You BLASTED that thing with the parts cannon!  You'd have been probably $1,000 ahead if you had just brought it to a competent shop rather than shotgunning a bunch of parts it clearly didn't need.   Just FYI - oil additives are really, REALLY good at ONE thing ... and that's emptying your wallet. They're ALL useless gimmicks.   If that has the L94 or L99, then #7 is an AFM cylinder. I'd suspect a failed lifter in that case.   If you leaned on wiring, sensors, and/or connectors while changing the oil, you'll have to check all that to be sure pins didn't get pulled out, connectors broken, etc.. Old wire loom that was barely adequate when new is certainly brittle by year 19 - make sure wires aren't chaffed and shorting out somewhere where you might have leaned. or supported yourself on it.   If your a mechanic, why didn't you just find out what you were missing and troubleshoot from there??  TIMED spark, fuel PSI / injector pulse, air, compression.  Can't make ANY money going the parts cannon route.
    • LOL! Are you joking?? That wax SUCKS! 100% gimmick made to "look" good.    After just TWO winters I had severe surface rusting in patches over 90% of the frame. Only reason it looks great in the pics is because I SATURATED the frame every single fall with used motor oil for 14 of the 16 years I owned it. Otherwise it would've been sent to the crusher 8 years earlier with the speed it was rusting prior!    I sold that POS 3 years ago. Was a gigantic headache the second it rolled off the showroom floor. Brakes pulsated on the TEST DRIVE. Door trim fell off the 1st week! Interior squeaked and rattled, and the drivetrain clunked after 2k miles. 4x4 switch failed shortly after. Front end - ball joints, struts, hub bearings - all failed between 38k-50k. Engine started burning oil at 50k. Rear and and transmission failed before 100k. Nothing but problems, and frustration with the piss-poor engineering designed to make you give up. Well, it worked! Nothing on that truck was easy to remove ... except the wheels. They haven't figured out how to screw that up yet. Give 'em time ...   I won't make that mistake again. EVER.   Such fond memories ... https://postimg.cc/K1qf23tS  https://postimg.cc/gallery/X02z64J  https://postimg.cc/gallery/mHSRXZv  https://postimg.cc/gallery/D4mMRfL
    • Different monitors do their test only under conditions specific to that monitor.  you MIGHT find the drive cycle conditions for the monitor that isn't ready on this site: https://lemon-manuals.la/   If it's not there, then it should be on alldata.com for your truck, but it requires a paid subscription.   And you need to know which specific monitor isn't ready.
    • from another thread   Update...although the truck sometimes seems to idle weird and the transmission shift a little weird, I've driven about 7,000  miles and no issues.   However, the way GM has handled my rental reimbursement, the situation when my truck quit, and the recall in general has led me to this point...I have driven a GM vehicle for the past 46 years and unless I buy a C3 Corvette, this is the last GM vehicle I will ever own. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...