Jump to content

Recommended Posts

Posted (edited)

I expect the dealer will do the TSB under warranty.

 

Here is where I'm at:

1) noticed peeling at 3200 miles.

2) sent pictures to Manager. Took it in for 3 day treatment

3) picked it up. Pointed out that they only did about 50% of frame.

4) they took it back for another day. Did a half ass job. Sprayed over rust.

5) the band aid coating starting peeling off on a couple spots within a week

6) now I treat the exposed areas myself.

 

Plan on taking it in right before warranty expires and have the re-do the whole thing

Edited by Haus_Z71
Posted

Hopefully the dealers get fed up with these tsb bandaids and make enough noise that GM ditches the shitty wax coating.

After a year, you'd hope they've already addressed the issue with the 2015 trucks.

 

I've been poking around reading about this 'wax' coating and the rust issues - and I haven't seen any complaints on 2015's.

 

It's a shame you guys have gotta deal with that. And like I said... send some emails or phone GMC/Chevy Corporate and complain. You can tell them that "Toyota is replacing frames due to rust issues". WHAT CAN YOU DO FOR ME and keep me in a GM truck?

 

Whatever it takes to put a bug up their ass! LOL

Posted

Wax doesn't chip like paint.

It just peels off like wax, especially after you apply it to a rusty surface.

  • Like 1
Posted

Gm has used this wax shit for decades... my 86 Blazer would have had it but it's been gone for decades. Local dealer has an 86 Chev 4x4 1/2 ton they put in the show room every year... has just over 100 original miles... it's a time capsule. It's frame wax looks pretty good though lol!

 

Sent from my SM-G900W8 using Tapatalk

Posted

It just peels off like wax, especially after you apply it to a rusty surface.

Yes, it certainly seems there was a problem with the process which resulted in poorer than normal adhesion.

Posted

Yeah you gotta stay on top of the undercoating if you don't want rust. Read the multiple threads on here that discuss the problems and solutions to it. I drive my truck through salt all winter and washed the frame off maybe twice all that time. Zero rust other than a couple spots hidden by the spare. You can't rely on the factory wax. It's basically good enough to keep the frame from rusting before you get it home from the dealer.

And in case the frame already had surface rust on it when coated with wax at the factory, the wax will last long enough to hide the rust until you get the truck home. :bs:

  • 2 weeks later...
Posted

Is this issue continuing on the 15s just bought a 15 serria all terrain about two weeks ago and looks good as of now. The only spots I have seen any rust is the bottom of the frame, were a guy would lift the truck up on a hoist. Were the pads would touch the frame and scuffed the wax coating. Other then that looks good.

Posted

Is this issue continuing on the 15s just bought a 15 serria all terrain about two weeks ago and looks good as of now. The only spots I have seen any rust is the bottom of the frame, were a guy would lift the truck up on a hoist. Were the pads would touch the frame and scuffed the wax coating. Other then that looks good.

Yep there are a few of us with 2015s that have this issue. Just keep a close eye on it. Sounds like you are in the clear. It usually starts peeling off in big chunks within 5k miles.

Posted (edited)

i got 5k miles on my 15 Built in may. wax is holding up really well. "knock on wood" ... Not to worried tho i always wash under my truck regularly i had a 04 and it had zero body rot, Very little frame surface rust when i finally traded it in. only thing that rotted out on that was the brake lines :banghead:

Edited by Rkaroll953
Posted

thank you for this post, I am so frustrated with GM as I am having the same problem. black 2014 gmc all terrain front metal bumpers paint is chipping off in flecks about dime size or better. Local Dealer said tough and im sol. Dealer sold it to me said bring it back and he would see what he could do but it sounds like rock chips. I've had 30 trucks never had a bumper look like this. Anyone find resolution to this? What a sad representation by gm.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Thanks, all. It sounds like keeping the software "as is" is the best course of action.
    • https://en.wikipedia.org/wiki/Overengineering   Excerpt from the above link: (BTW the above is a 90 second read)   [Quote]   A story about very precise engineering is given in the 1858 story The Deacon's Masterpiece or, the Wonderful "One-hoss Shay": A Logical Story by Oliver Wendell Holmes Sr., which tells of a carriage (one-horse shay) Because it had been engineered so that no single piece failed first – no piece was over-engineered relative to the others, and they thus all collapsed at the same time. A similar quote by Ferdinand Porsche claimed "the perfect race car crosses the finish line in first place and immediately falls into pieces."[5]   [End Quote}   By Engineering's  own definition then; the AFM and Torque Converters, 4-5-6 clutch assembly of the 6L80E, and a dozen other common chronic parts and systems failures are "UNDER ENGINEERED". And by their own definition done so with INTENT. Ya can't have it both ways OEM's.     
    • Everything you need to know..... https://www.gm-trucks.com/forums/topic/198157-2014-2017-dl8-dl3-towing-mirror-upgrade-–-mirrors-explained/
    • I was in Utah this week attempting a bow hunt in the Wasatch mountains with friends.  On the evening of the first hunt, making my way across a ridge to a friends camp, the upper control arm on the driver's side separated, the CV axle got trashed, and the wheel was dang near at a 45 degree angle to the ground.  I was able to get it towed off the mountain and into town about 3:00 am, and spent the remainder of the night in an O'Reilly's parking lot.  Luckily, there was a Chevrolet dealership not to far away so I was able to get to the dealership and pick up a new CV and UCA.  It would have been a few days before they could have gotten to the truck and I brought tools with me on hunt since it was a two day drive to get there, so I did the repairs myself in the O'Reilly's parking lot.      What's interesting is that the UCA ball joint didn't break, it just popped out of the bottom of the UCA.  There was VERY LITTLE evidence of grease on the ball joint or in the socket, and you could see where the ball joint had warbled out part of the socket over time.  I guess that's what happens over 186K miles of use :)   Big Kudos to O'Reilly's for letting me work on the truck in their parking lot.  However, they made a $150+ off of me from the purchase of various tools, so I guess it was in their best interest anyways :)   Getting towed off the mountain.   UCA Ball Joint Socket   Trashed CV   Suspension disconnected and UCA and CV Removed   New UCA and CV installed with the suspension buttoned up.    
    • My family still laughs at me when they see me drive up in the minivan. Same with less than a V-8 truck. It helps that I have choices. I don’t think I could only have a minivan as the one and only vehicle as much as I like it. And I wouldn’t pass up a good buy on an older V-8 reg cab GM truck. Could you live Raven as the only ride?
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...