2014+ K2XX - Center Console Swap / Retrofit - Plug and Play Harness!

[pgamboa]

Hey guys has anyone successfully done a center console swap on the Eassist ? 

Yes. You just need to ensure you get an E-Assist version of the console With all the vents and such.


Sent from my iPhone using Tapatalk

[Bradley Michael Walsh]

12 hours ago, pgamboa said:

Yes. You just need to ensure you get an E-Assist version of the console With all the vents and such.


Sent from my iPhone using Tapatalk

 

 

Okay. I already have a non Eassist Center console. Going to try and retrofit it and cut vents to make it work 

[wreedZ71]

Is there a website to order this from?

[pgamboa]

Is there a website to order this from?

Not yet. All ordering done via PM or Email. Email me at [email protected]


Sent from my iPhone using Tapatalk

[RoflCopter726]

Got my order in with pgamboa, will update with pics once everything shows up and after install.

[jonho]

On 1/14/2018 at 8:06 PM, pgamboa said:

You looking for pics of the finished Plug and Play Harness?  If so, I updated the post and they are in the first post.  

how do i get harness ordered

[Packers774]

So is the bracket not necessary for installation? My console came with a bracket (from Ebay) and I have no problem screwing it in, but wont if it doesn't add much.

[WNYK2]

4 hours ago, Packers774 said:

So is the bracket not necessary for installation? My console came with a bracket (from Ebay) and I have no problem screwing it in, but wont if it doesn't add much.

That's all that secures the front of the console.Without it I think you could have some rattles or sqeaks eventually

[got2bgm]

Hey guys. Thought id put this up and give a huge thanks to pgamboa. Got the console and leather seats installed. 2018 gmc sierra rclb 2wd. Used pgamboa harnesses. Amazing work couldnt be happier. Would recomend to anybody very helpful. Thanks a bunch!

[pgamboa]

how do i get harness ordered

PM me. Or email me at [email protected]


Sent from my iPhone using Tapatalk

[bkesting]

A little off-topic,........i snapped off the cover of one of the cigarette lighter/charge ports in my center console. How hard is it, or what is the procedure, to replace that little cover?

[pgamboa]

A little off-topic,........i snapped off the cover of one of the cigarette lighter/charge ports in my center console. How hard is it, or what is the procedure, to replace that little cover?

I just did this for a customer today.

 

It’s easier if you have access to the back side. There are 2 locking tabs you need to lift up. This allows the metal insert part to push out. Once out, you can then push the plastic part of the housing and door out. But metal part needs to come out first.

 

Apparently, there is a special tool to remove it from the front.

 

Dorman 57450 Lighter Socket Removal Tool https://www.amazon.com/dp/B01ID3H3SC/ref=cm_sw_r_cp_api_i_nK2vDbKGVAVPR

 

Sent from my iPhone using Tapatalk

[bkesting]

11 hours ago, pgamboa said:

I just did this for a customer today.

 

It’s easier if you have access to the back side. There are 2 locking tabs you need to lift up. This allows the metal insert part to push out. Once out, you can then push the plastic part of the housing and door out. But metal part needs to come out first.

 

Apparently, there is a special tool to remove it from the front.

 

Dorman 57450 Lighter Socket Removal Tool https://www.amazon.com/dp/B01ID3H3SC/ref=cm_sw_r_cp_api_i_nK2vDbKGVAVPR

 

Sent from my iPhone using Tapatalk

So this tool just pulls it all out from the front without taking anything else apart?

[Edward Magri]

On 12/13/2017 at 10:35 PM, pgamboa said:

Jump Seat to Full Center Console Retrofit 
Plug and Play Harness by PGAMBOA

 
 
For those of you looking to swap your Jump Seat to a Full Center Console, I now have a Plug and Play Harness for this upgrade!  This long awaited - PnP Harness will allow you to EASILY perform this upgrade.  NO cutting or splicing needed!
 
Center Console - Plug and Play Harness is $150 Shipped anywhere in the US. For Canada, please add $24.95.
 
Since there are several versions and configurations of center consoles and truck trim levels, I feel that I have covered a majority of the configurations that are out there.  There will be several assumptions on the ability to perform this upgrade and I’ll try to be as detailed and comprehensive as possible.
 
Please see the different USB Cable configuration diagrams at the end.
 
Assumptions:
 
- 2014-2015 Center Consoles will have different USB Cable requirements than 2016-2017 AND will have different USB Hubs.  The PnP Harness should be compatible, but you MUST verify the connector under the passenger AND the front of the console!  Since this is a custom product, there will be NO REFUNDS on it.
 
- Center Console MUST have its factory harness intact and not modified.
 
- Connection under the Passenger Seat AND Front of Center Console must look exactly like the diagram.  There is a variant X314 Connector under the seat, so yours MUST match in order for this harness to adapt. 
 
- Additional GM USB Cables must be purchased separately (based on your console year) to get USB Hubs functional.
 
- Wireless Charging - Wireless Charging became available on 2016 and 2017 consoles.  If you are looking at adding a Wireless Charging Lid to a 2014-2015 Console, please PM me for requirements.  Also, there are known issues with 2016/2017 Consoles with the Wireless Lid and charging iPhone 8 and iPhone X Phones.  There are workarounds for this that require some form of modification to the charging module.  You can also swap the module for a 2018 Module that DOES charge iPhone 8 and iPhone X phones.  Please PM me for questions on specifics.
 
- Your truck MUST have an existing 110V AC Outlet AND (1) - 12V DC Cigarette Lighter Plug as you will be reusing those.  My PnP Harness DOES NOT add the 110V AC Outlet if you don’t already have it.  However, I CAN add an additional 12V DC Outlet connection if needed.
 
- USB Cable connections will come from your HMI (Behind the Glove Box).  You MUST verify that you have the USB Ports available, otherwise, your USB Hubs will not work correctly.
 
- This PnP harness DOES NOT add any Car Play, Apple Play, or Android Play functionality.  If your truck did not already come with it, you will not gain it.
With this PnP Harness, you ***should*** have ALL the components in your console functional.
 
Those options include:
 
Front of the Console:

• Front - Left USB Hub (Dual USB - 2016/2017or Triple USB Hub 2014/2015 - Uses my Plug and Harness AND a USB Cable from the HMI
• Front - Left 12V DC Cigarette Lighter Outlet - Uses existing connections (truck must be equipped.  If not, I can custom add this if needed)
• Front - Right 12V DC Cigarette Lighter Outlet -  Uses my Plug and Play Harness
• Front - Right 110V AC Outlet - Uses existing connections (truck must be equipped)

 
Inside Storage Compartment:

• Inside - Left 12V DC Cigarette Lighter Outlet - Uses my Plug and Play Harness plugged into the front main 42-Way Connector
• Inside - Right USB Hub - Uses my Plug and Play Harness plugged in the front main 42-Way Connector and USB Cable
• Inside - LED Lamp - Uses my Plug and Play Harness plugged into the front main 42-Way Connector
• Wireless Charging Lid (2016-2017 only) - Uses my Plug and Play Harness plugged into the front main 42-Way Connector

 
Rear of the Console:

• 12V DC - Cigarette Lighter Outlet - Uses my Plug and Play Harness plugged into the front main 42-Way Connector

 
THERE IS A LOT TO CONSUME HERE, SO PLEASE PM IF YOU HAVE QUESTIONS ON THIS.  I WANT ENSURE THAT YOU UNDERSTAND ALL THE REQUIREMENT FOR THIS RETROFIT BEFORE PURCHASING.
 
 








 
 
 

16-Pin - Plug and Play Harness


23-Pin - Plug and Play Harness

 

[cameronNrachel]

On 8/9/2019 at 1:44 PM, pgamboa said:

Not yet. All ordering done via PM or Email. Email me at [email protected]


Sent from my iPhone using Tapatalk

I sent you an email on friday to see if you can help me out for a plug an play harness. Im trying to convert from a console to a jump seat until my kids are gone without splicing into wires. Details are in the email to [email protected]