Jump to content

Recommended Posts

Posted (edited)

Any had any experience with this kit?

 

GM Dash Cam

 

It seem interesting and possibly worth it.  It says it has built in ADAS so I'm curious what all that might add to the functionality of the vehicle seeing as this system actually plugs into the OBDII plug and communicates with the onboard computer.

 

Thoughts?

Edited by brisk00
Changed to OBDII
Posted

I have been looking for a dashcam and the most advertised 1 I've been seeing is the owl dashcam. Same price but includes a monthly fee bc it stores videos on online server and sends notifications to your phone. Everything I've been reading says that a continuous monitoring online server is the best way to not miss an incident. If someone dings your passenger door and the dashcam catches it but you don't, you only have a limited amount of time to retrieve the file before it is overwritten. If anyone has more information or experience with any of these dash cams, I would like some feedback. OP sorry I wasn't any help to your original question, but I hope my information helps in your purchasing selection

Sent from my SM-G975U1 using Tapatalk

Posted

Sorry, a bit off topic...  I'm curious why GM doesn't sell a direct connect module which taps directly into the current camera's already installed on the truck.  How cool would it be to have a recording of the front, back and side camera's??  Assuming you already have this feature on your rig of course.

  • Like 6
Posted
On 5/8/2019 at 5:32 PM, AT4CK! said:

Sorry, a bit off topic...  I'm curious why GM doesn't sell a direct connect module which taps directly into the current camera's already installed on the truck.  How cool would it be to have a recording of the front, back and side camera's??  Assuming you already have this feature on your rig of course.

I would love something like that.

  • 2 weeks later...
Posted
On 5/8/2019 at 10:42 AM, brisk00 said:

Any had any experience with this kit?

 

GM Dash Cam

 

It seem interesting and possibly worth it.  It says it has built in ADAS so I'm curious what all that might add to the functionality of the vehicle seeing as this system actually plugs into the OBDII plug and communicates with the onboard computer.

 

Thoughts?

I've got it, $400 online. Easy to install, comes with pass-through OBD II harness (so it doesn't occupy OBD II port), seems to be working well. Comes with 32GB card, too small - got 128GB Samsung Endurance (you'll need endurance, regular sd card may not last long). People say 256GB should also work. For two cams it needs 160MB per minute. Video quality is ok, nowhere close to gopro or something like this, but not bad either. Parking mode also seems to be working.

Didn't try ADAS - don't care and actually don't want it to make any sounds or signals and usually it's like that.

One thing - glare from windshield is very strong, you'll need CPL filter for front cam at least. Rear seems to be ok without. I've ordered one for $20 on Amazon, will try it tomorrow. Should help.

  • Like 1
Posted

THINKWARE Q800PRO Dual Dash Cam Front and Rear Camera for Cars, 1440P, Dashboard Camera Recorder with G-Sensor, Car Camera w/Sony Sensor, Parking Mode, WiFi, GPS, Night Vision, Loop Recording, 32GB https://www.amazon.com/dp/B07RLPWZX3/ref=cm_sw_r_cp_tai_qDj6Cb6CQSMC7

Got it for 350

I ordered the obd2 wire from thinkware

122dbbfd4aa8bc74cb4320d8a0f7b5c1.jpg

 

 

Sent from my iPad using Tapatalk

 

Posted

I have a Blackvue DR590W-2ch in my truck. Came in handy when my door was busted in. Although, it didnt really break the case, was just good to have video of it happening. 

Posted

I'm sorry guys. I don't get why this dash cam is so expensive! I have had this one, on my previous and the new trucks, and I'm happy with it:

https://www.amazon.com/gp/aw/d/B071LPV7G6?psc=1&ref=ppx_pop_mob_b_asin_title

Is there any benefit for connecting the cameras to OBD II? 

I prefer not to connect anything to OBD II, since it's directly connected to the ECU. 

This truck is already so complicated and high tec. I don't want to mess with that ?

Posted
19 hours ago, AMPRG said:

I'm sorry guys. I don't get why this dash cam is so expensive! I have had this one, on my previous and the new trucks, and I'm happy with it:

https://www.amazon.com/gp/aw/d/B071LPV7G6?psc=1&ref=ppx_pop_mob_b_asin_title

Is there any benefit for connecting the cameras to OBD II? 

I prefer not to connect anything to OBD II, since it's directly connected to the ECU. 

This truck is already so complicated and high tec. I don't want to mess with that ?

Thinkware is a Korean well established brand, conservative and reliable. Korean dash cams are more expensive in general. 
$400 for top of the line full HD dual cam kit with hardwire harness is a decent price, I wouldn't pay GM $500 MSRP for it. By giving it part number GM made this choice easy for me.

This is the range for such setup with real parking mode which is very tricky to do right so it's actually useful, lasts long enough and doesn't drain your battery to death.

If you don't want such parking mode price should be below $200.

Posted
6 hours ago, hardloaf said:

Thinkware is a Korean well established brand, conservative and reliable. Korean dash cams are more expensive in general. 
$400 for top of the line full HD dual cam kit with hardwire harness is a decent price, I wouldn't pay GM $500 MSRP for it. By giving it part number GM made this choice easy for me.

This is the range for such setup with real parking mode which is very tricky to do right so it's actually useful, lasts long enough and doesn't drain your battery to death.

If you don't want such parking mode price should be below $200.

Then why does it need to be connected to OBD II? 

Posted
6 hours ago, AMPRG said:

Then why does it need to be connected to OBD II? 

OBD II is the best option of them all - cam knows exactly when engine is on, so it can drain as much power as it needs. Everything else - go to parking mode, i.e. low power drain. OBD II also can provide enough power on its own and it works same way in all vehicles. That kit should work fine in any car, actually. With that engine start/stop tech they have a twist now - engine off doesn't always mean that you are parking, so they have a delay for about 3 minutes before going to power saving. Most of vendors just occupy the port permanently and even have on/off switch on the plug, but I don't like that. That harness is much cleaner and gives you OBD II port back, so we can use it as originally intended without unplugging anything. As long as it works it's fine, but with OBD weird stuff may happen, so I hope GM actually did some review and testing before giving it part number.

Other options would be fuse box tap (no hanging wires and doesn't really know when engine is running) or cabin 12v/USB ports, but that usually means hanging wires and same problem with engine state.

 

  • Like 1
  • 3 weeks later...
Posted (edited)

Not a 2019 new body, but I just did the GM one on my 2019 old body.  So far so good.  The OBD harness is a nice touch as I was able to keep my Range plugged in.  Both working non issue.  Plus its very discreet, and no messing with wiring and fuses, etc.   

 

Footage seems nice, sound quality is good.  I wish they had either a better mic or slightly higher quality?  Needs a wind sock for when the windows are down LOL.  They give you a $hit ton of wire for both the front and rear cameras so they can go just about anywhere on any truck (long enough for a limo). 

 

I lowered my headliner, removed the front console and rear dome lamp to properly feed everything.  The front edge of the center of the headliner has a notch for the mirror harness and worked perfectly to feed the camera wires in.     

Edited by newdude
  • 1 year later...
  • 3 months later...
Posted

So I had my local dealer install the GM accessory cam.  I think they mounted it in the wrong place.  Thoughts?

7EB0FA98-92C5-4577-8199-2100C9DF53A0.jpeg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • My 2025 Silverado 1500 had to receive a brand-new engine (long block) under warranty last month at only around 16,500 miles. Before the replacement, the truck repeatedly displayed "Engine Oil Level Low" warnings, even though the Oil Life Monitor still showed around 50% remaining after about 6,000 miles since my last oil change. After seeing the warning several times, I checked the dipstick with the engine cold, and the oil level was completely normal. The next day, the message escalated to "Add Engine Oil." At first, I assumed it was just a faulty oil level sensor, so I brought the truck to the dealership. After inspecting the engine, they found internal cylinder wall scoring and ultimately replaced the entire long block under warranty. Before this happened, I was planning to install a 4-inch lift and suspension upgrade on my truck. After needing a new engine at just 16,500 miles, I honestly don't see the point anymore. I also contacted GM to ask whether my vehicle qualified for a buyback, but I was informed that it does not at this time. Anyway, this experience has left me with serious concerns about the long-term reliability of this engine. I sincerely hope NHTSA expands the current investigation or recall to include 2025 model and performs a thorough inspection of affected vehicles. My biggest concern is that these engines may fail shortly after the powertrain warranty expires. If GM truly stands behind this engine, then at the very least, please consider extending the powertrain warranty to 10 years for affected owners. That would go a long way toward restoring customer confidence.
    • Without exception but then I'm the odd duck, right? I know what goes into that test, how it is calculated and thus how to beat it. But EPA values are often not beaten by the general public and the government has in past years adjusted the means and methods to come to those values to more closely approximate "Joe Average".    The only real trick to beating that EPA average is don't drive like "Joe Average".    It's the same method you used to profit from "Economic Migration" and in doing so beat the 'stats'. But you, like me, are not "Joe Average".     The thing you don't seem to grasp is this "Purchasing Power Index" isn't forward looking. It doesn't predict what it going to be but looks backward and states what it was. They are not telling us what the THINK, they are telling us what they MEASURED. Example:    Wife says "I'm going to lose 40 pounds by Christmas". May she does, maybe she doesn't but the doctors office who weighed her when she made that statement and again at Christmas only REPORTS what the RESULT was. You and I can banter about what was possible and what aunt Tilly did till the cows come home but the result is the result. Arguing otherwise is.....irrational. That's all I'm saying. This isn't about:      What you are calling a 'Statistic' is a RESULT not a CALCUATION and as a result the RULE. Like gravity as a rule, it can not be broken. 
    • Just wanted to say thank you for posting this. Years later, your thread is still helping Silverado owners.   I bought my 2025 Silverado 1500 in January 2025, and I've had what feels like the exact same rattle since day one. After reading your findings, I believe my truck has the same issue with the cable carrier contacting the rear sliding window. To be honest, I had pretty much given up on pursuing the issue. It wasn't until I recently drove another brand's pickup that I realized just how quiet their cabin was—and how noisy mine has been all along. On my truck, the rattle happens on almost any paved road, gets even worse on rougher pavement, and I can even hear it during braking and acceleration.   I actually referenced your thread when submitting my case to GM, hoping they'll recognize this as a recurring issue instead of treating it as an isolated incident. The reason I reached out to GM first is because my dealership told me they would need to keep the truck for at least two days just to diagnose the problem. I was concerned that even after two days, they still might not be able to identify the source of the rattle before giving the truck back to me. I had also asked a few dealerships about this issue during previous service visits, but none of them seemed to know what was causing it or had a solution. That's why I decided to contact GM directly first, hoping they might already have an official repair procedure or guidance for this issue.   I also hope GM eventually comes up with an official fix for this problem. I have a feeling there are many Silverado owners experiencing the same rattle, but most either choose to live with it or simply don't know what the cause is.   Really appreciate you taking the time to document your diagnosis. Your post is still making a difference years later.
    • I have 2 choices. 
    • Do you have access to BP fuels? Some stations have Silver 91 E-0 priced the same as their 93 E-10.  There is a local Marathon with 90 alky free for $6 a gallon but I go down the road to BP for $5-ish. They also have a 100 E-0 but that stuff is $10 a pop. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...