Jump to content

Recommended Posts

Posted

Just waiting for GM to find me another truck that does not vibrate :tear: the last

seven I've driven all vibrate :nonod:

 

Merry Christmas Everyone !

Posted

We'll I put a set of bfg ko2's on today; my vibration is still there. It's no worse, and as stated has never been bad, just noticeable only between 43-48 mph.

Oh well I'm done chasing the vibe, not in the tires, not in the backlash.

I'm just gonna ignore until chevy admits and fixes, or pigs fly....got a feeling pig dynasty will be a hit before gm ever acknowledges. Oh we'll got new shoes

  • Like 1
Posted

Just waiting for GM to find me another truck that does not vibrate :tear: the last

seven I've driven all vibrate :nonod:

 

Merry Christmas Everyone !

 

Hi,

 

Were all seven of them 14's?

Posted (edited)

 

Hi,

 

Were all seven of them 14's?

No only six of them

 

I drove a 2015 C-1500 C/C short box LT with four miles on it, as soon as I got

to the highway (6) miles it started to vibrate :ughdance: @ 62mph

Edited by Enforcer
Posted (edited)

Surprised GM corporate hasn't mandated that when test driving 2014 and newer models, the dealerships are to never allow the vehicle to go above 45 mph and vehicle is to remain on city surface streets only.

Edited by 97SierraSLT
Posted (edited)

Surprised GM corporate hasn't mandated that when test driving 2014 and newer models, the dealerships are to never allow the vehicle to go above 45 mph and vehicle is to remain on city surface streets only.

I know for a fact (I know a guy who works there and he know guys at other dealers) all the dealerships in my area all are telling the salesmen in their meetings to be sure to remain on city streets only but I cant say its a mandate from GM, i think its just common sense by the individual dealers to try and get them off the lot is all

Edited by keakar
Posted (edited)

No only six of them

 

I drove a 2015 C-1500 C/C short box LT with four miles on it, as soon as I got

to the highway (6) miles it started to vibrate :ughdance: @ 62mph

Nobody believed me when I started a thread and said I drove some 2015's and they vibrated also. I was basically called a liar by multiple people on this forum. Since then I have seen numerous posts by people complaining about vibrations and shakes in the 15's.

GM needs to get their shit together because I see dealership lots full of new and used 2014's, while I also see more and more Rams on the road everyday!!

Edited by 14LTZZ71
Posted

Vibration Log: 12/24/14

Preface: I apologize for my similar multiple posts under different threads but after reading all the different treads, this post seems to have the most information about both symptoms and possible fixes. It has been very helpful in assisting me toward documenting my vibration issues and to be able to hand over a detailed account to the service manager.

Here’s where I stand: 2015 Sierra Denali 4x4, 5.3L, Crew Cab, (I do not have the Driver Alert Package), Short Box. 20” Factory Wheels, Nitrogen Filled Goodyears. 1 month old, 1400 miles.

 

Felt vibration on 3rd day of ownership when I drove on the interstate for the first time. At 65 the vibrations started and as I accelerated thru 75mph, they worsened. I pushed to over 85mph, where the vibrations lessened. I adjusted my speed to find the spot where I had the worse vibration; it was at 77/78 mph. I called service department and asked them to look into the problem, I thought that this was a tire balance problem, what else should I have thought with a new vehicle after 3 days?

Took my truck in, and they gave me a new SLT to drive. This was a nice truck that had NO vibration. I picked up my truck 2 days later and they told me they had road forced balanced my tires and I should be good to go. Unfortunately, for the next 2 weeks I drove on city surface streets and lower speed state highways. I never noticed any major vibration.

 

First real road trip: Dec 23rd, 300 miles on 80% interstate with family. First leg was a mountainous 45 mile stretch of interstate with a lot of accelerating and braking, so noticing vibrations were the least of my worries. 2nd leg was on I-40 across almost the entire width of Arkansas, west to east. Once on I-40, I kicked it up to 80mph. Within minutes, the cab area was vibrating (shuddering side to side) enough to slosh iced-tea out of the cup sitting in the cup holder. Soon after that, the DC plug in the back of the console vibrated out of the socket. Everyone in the truck was feeling the vibrations. I backed my speed down to under 70mph and the vibrations lessened. I called my dealership from the road and told them the vibrations were still present, and maybe even worse. They made an appointment for me next Monday. For the next 2 hours I tried to stay around 70mph where the vibrations were present but not severe. Any time I had to accelerate to pass, the bad vibrations came back. The last hour of the drive, I hit newly paved interstate and used this stretch for an ad-hoc a vibration test.

Vibrations were worse when:

  • Accelerating thru 75mph up to 85mph
  • Decelerating (coasting) from 80 to 74, vibrations seemed less.
  • Sustained speed of 78mph was the nastiest

We arrived at our destination and the first thing I did was to fire up my laptop and search for vibration issues on GM trucks. Yahtzee – here I am.

Yesterday, I took drove my truck to an in-law who is a Ford mechanic and asked him to drive my new GMC and to give me some sort of assessment of my vibration issues. I gave him my keys and off we went - our only limitation was we were not near an interstate, so we were blazing up and down a state highway, and just when the major vibrations started, he had to back down on the accelerator, but we both definitely felt it. He did a couple of speed runs using the manual settings. In M5, at around 75mph, the vibrations “seemed” less than when in overdrive. After the test drive, he really couldn’t make a grounded assessment, but what did was give me some guidelines on logging the issue. He had me document the following on my trip back home:

  1. Time from cold start to fist feeling major vibration: 22 minutes
  2. Monitor Air Pressure on all 4 tires: cold start to vibration and thru end of journey. Look for one tire to pressure up faster than the others. START: LF 35, RF 35, LR 34, RR 35. Vibrations Start: RF went highest first to 37, others followed within minutes and all stayed at 37 throughout trip.
  3. Use the new 8 mile stretch of interstate to do the following:
    1. Find speed with worst vibration and accelerate and decelerate thru that point: 77 / 78 were worst. Accelerating thru 78 kept the vibrations going to about 82. Decelerating (not coasting) from 78 kept the bad vibrations going down to 72mph.
    2. At worst vibration speed, shift to manual and take transmission out of OD: At 78, I shifted into M5, rpms went up but vibration was same.
    3. If possible, gently swerve left and right to see if change in direction makes a difference: Gently swerving to the right seemed to add more vibration than swerving to the left.
    4. Accelerate to a speed that boarders on my comfort zone then brake gently down: Went to 94mph and back down to under 70mph. Smooth ride at 90+, vibrations came back but not as bad in brake assisted decelerating.
    5. Set cruise at worse vibrating speed and see if it stays engaged: Set at 78mph, the truck was vibrating badly and actually started lunging forward (new symptom?).

So, this log is what I’m taking in on Monday. I hope to update the forum on the fix sometime next week, I have confidence that GM tech will get it fixed!

Posted

That would be me.

I wouldn't buy a goat either. I drive one at work because I have too... it has it problems.

Posted (edited)

Here's my thing. There are guys here at work who have new Sierras. I have several friends who have new Sierra's as well. I've ridden in them and drove some and none of them vibrated just as mine doesn't. My truck ('14 Sierra) is silky smooth and I couldn't ask for a smoother truck at any speed. This truck drives and rides better than my '13 Silverado did. With a bottle of water in my console, there is hardly any movement even at high speeds. I've seen vids where the water is steadily dancing. Wonder how this can be so hit and miss? There isn't one person around my area that I've talked to who has a vibration/shake problem. Even when I see people I don't know, I ask them about their truck (some are Silverado's but mostly Sierra's) and haven't heard anyone complain about vibrations. Baffling...

Edited by mafd2
  • Like 1
Posted

Fortunately my vibration issue is gone. I returned my truck and purchased a non-GM vehicle this week. I have very mixed feelings as I have been a GM customer for 37 years, but the reality is the New GM is not the same company I have dealt with over the years.

  • Like 1
Posted (edited)

Just purchased a 2014 All Terrain CCSB 6.2 (Aug 14 build) and I have the shakes from 70-85. Dealer road forced tires and now shakes only seem to be present when cold and get better after driving for about 10 minutes. I decided to inflate the tires to 37 #'s cold and now the truck rides smoother even while cold, but still not perfect. I think/hope there might be something to this being tire related (Goodyear) and the tires flat spotting while parked. Love the truck otherwise so hoping the dealer can resolve whenever I get a chance to take back in for service.

Edited by Scotty5000
  • Like 1
Posted

Just purchased a 2014 All Terrain CCSB 6.2 (Aug 14 build) and I have the shakes from 70-85. Dealer road forced tires and now shakes only seem to be present when cold and get better after driving for about 10 minutes. I decided to inflate the tires to 37 #'s cold and now the truck rides smoother even while cold, but still not perfect. I think/hope there might be something to this being tire related (Goodyear) and the tires flat spotting while parked. Love the truck otherwise so hoping the dealer can resolve whenever I get a chance to take back in for service.

 

Hey Scotty,

 

Sorry to you're experiencing this as well but it's good to hear things are getting smoother. Please feel free to reach out to us via private message when you decide to go back for service. We'd be happy to connect with them for further discussion.

 

Best Regards,

 

Eddie A.

GM Customer Care

Posted

 

Hey Scotty,

 

Sorry to you're experiencing this as well but it's good to hear things are getting smoother. Please feel free to reach out to us via private message when you decide to go back for service. We'd be happy to connect with them for further discussion.

 

Best Regards,

 

Eddie A.

GM Customer Care

Oh please...

Posted (edited)

Oh please...

Oh I hear yea :bs:

 

In less then a few hours after GM contacted the BBB that my truck was unrepairable I've not heard a peep

from GM Customer Service :nonod:

 

In fact my truck is SO BAD It's at the selling dealership !

 

So not only do I not have a truck, I'm WAITING ON GM AGAIN and their biggest problem is finding

me a truck like mine that does not VIBRATE :fume:

 

So now that I seem to have all this time on my hands, I'm compiling list's from the threads here

and on few other sites in the effort to find the common denominator GM refuses to look for :idiot:

 

Stay tuned for futher updates :rolleyes:

Edited by Enforcer

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Monday looks like a good day for the dealer to test an ac issue. Hopefully it all turns out good.
    • Paid $2.72 for E85 today.
    • Welcome back! No, it definitely doesn't pass the sniff test. Even "ceasefire" needs an alternative definition these days.    $5.29 at Kroger today
    • That makes sense, and I think you are describing the real product problem. Capturing data is the easy part. If the owner or technician has to manually dig through five minutes of millisecond-level logs, the product has already failed. The device would be at the ECM harness, not at the OBD port, so I agree that data retrieval and event marking need to be thought through carefully. The way I am thinking about the architecture is: The recorder itself should not depend on a phone, app, Bluetooth, Wi-Fi, or cloud connection to capture the event. It should always keep a local rolling buffer and lock the event locally. A button, phone app, or small cabin device would only act as an event marker. If the driver feels a stumble and presses the button 10–30 seconds later, the pre-buffer has to already contain the useful data. For data retrieval, the practical options would be a sealed service USB lead, Wi-Fi download, or a phone/cabin companion device. I would not expect the owner to remove the ECM-side module or work with raw files directly. The cloud or AI side would be for interpretation, not for capturing the event. The truck may have no connection when the issue happens, so the evidence has to be saved locally first. After that, cloud processing could help decode the data, compare it against baselines, and generate a readable report. For the first version, I would keep the automatic triggers conservative and objective: driver event marker bus-off error passive voltage drop / brownout device reset FIFO or queue overflow a normally periodic message disappearing side-to-side communication mismatch, if the topology supports that For “learning normal,” I agree with your point, but I would not want to overclaim it as automatic root-cause diagnosis at first. A realistic first step would be learned baseline comparison for that specific vehicle and operating condition. For example, a value would only be compared against similar conditions: RPM range load / MAP throttle position gear / vehicle speed coolant and oil temperature battery voltage AFM/DFM state, if decoded and validated Then the report could flag things like: this periodic message disappeared compared with its normal timing this value deviated from this vehicle’s normal range under similar conditions the same abnormal pattern repeated after the same type of event the anomaly occurred together with voltage, oil-pressure, misfire, or communication changes But I would still call that “abnormal pattern detected,” not “replace this part,” unless there is enough validated repair data behind it. So the intended product would not be “here is a huge log.” It would need to be an event package: what triggered the capture how much pre/post data was preserved what changed before and after the event whether the device itself reset, overflowed, or saw a bus error selected graphs around the event raw data only as supporting evidence From your perspective, what would make this kind of report useful instead of just another datalog? For example: What are the top 5 parameters or events you would want highlighted first? Would you trust a learned baseline for that specific vehicle, or would you prefer fixed thresholds? How much false-positive flagging would be acceptable before you stopped looking at the reports? What would a one-page report need to show for an independent shop to take it seriously? For misfire, AFM/DFM, oil pressure, or U-code complaints, what would you want the tool to flag automatically?
    • 2024 Silverado 2500 HD LTZ grille no camera Parts list   84603331 84913656 84913657 84913654 84913655 84911567 84911568 85646092 85646093 85797921 85797922   11570637  x10-15   grille/bumper bolts 11546500  x10      grille clips 11571006  x10      push/retainer clips 11546454  x6       nut retainers 11611609  x6       M5 bolts 11610700  x6       molding/trim retainers
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...