Jump to content

Recommended Posts

Posted

Found a lawyer and sent the dealership and GM a final attempt to fix letter on my 2014 Sierra. Heard back from GM and they are setting it up with the dealership that I purchased it from. They could not fix it the first three times so I doubt anything will change.

 

 

Sent from my iPhone using Tapatalk

Posted

Found a lawyer and sent the dealership and GM a final attempt to fix letter on my 2014 Sierra. Heard back from GM and they are setting it up with the dealership that I purchased it from. They could not fix it the first three times so I doubt anything will change.

 

 

Sent from my iPhone using Tapatalk

 

 

Good Luck..... It took me four months from that point. I hope they treat you better than they treated me.

Posted (edited)

Ok so their are alot of pages here. And reading them makes me very parinoid so i stop reading. My 350 mile 2015 has a shake starting at 73 or 75 and goes a bit above 80. Flat expressway, 3.08 gear 18"s z71 crew. Can be minor or can shake the crap out of my arm rest of the bench, random in its intensity though usually lighter. Feels like in middle or rear of truck little feel in steering wheel. Is this the rear diff shim issue? Is their a bullitin on it to take to the dealer?

Edited by afireinside7444
Posted

How serious are some of yalls issues? Reason I ask is I seem to have a vibration right around the speeds said (69-73mph) and the steering wheel shakes up and down periodically and the passenger seat shakes a bit. Should I take it in and address it with the service dept?

Posted

So, I took mine in today. They did a forced balance on all 4 wheels. Here's the vid I took afterwards, absolutely NO difference...

 

 

Posted

Ok so their are alot of pages here. And reading them makes me very parinoid so i stop reading. My 350 mile 2015 has a shake starting at 73 or 75 and goes a bit above 80. Flat expressway, 3.08 gear 18"s z71 crew. Can be minor or can shake the crap out of my arm rest of the bench, random in its intensity though usually lighter. Feels like in middle or rear of truck little feel in steering wheel. Is this the rear diff shim issue? Is their a bullitin on it to take to the dealer?

sorry to say, from what I've read here, yes there is. I havn't been on this forum super long, but ive seen multiple people saying they have had their rear diff's rebuilt/ replaced for vibration issues

 

So, I took mine in today. They did a forced balance on all 4 wheels. Here's the vid I took afterwards, absolutely NO difference...

 

 

that sucks man, mine isn't that bad, but it still miserable to be dealing with either way. try to get them to look at some of the things previously mentioned (driveshaft, rear diff, engine for excessive AFM shake, wheels and rims for proper roundness - not just rebalancing)

hope something works for ya

Posted

Mine has been at the dealer for 3 days now. shakes just like in the vid above mostly between 70 and 75. they checked the wheels said they were all within spec but they went ahead and re balanced them anyway. they test drove it and said problem was still there. next they swapped out the rims and tires with another truck and problem still existed. then they rotated those new wheels and tires still no difference. technician took another truck for a test drive and said it did the same thing and that it must be normal for these trucks.

 

service adviser is waiting on the service manager to make a decision on what to do next. i really like my truck hope it gets fixed.

Posted

Can others take some video's and post them here?

 

I'd like to use it as supporting documentation. You can never have too much info when dealing with the dealerships, and showing this is not necessarily an isolated case may be helpful.

Posted

i will if i ever get mine back. actually i hope they fix it and i dont have to do a video.

 

i should have done a video before i brought it.

 

search on youtube there are a few already on there.

Posted

Can others take some video's and post them here?

 

I'd like to use it as supporting documentation. You can never have too much info when dealing with the dealerships, and showing this is not necessarily an isolated case may be helpful.

send me your email I will send you some videos.

Mine has been at the dealer for 3 days now. shakes just like in the vid above mostly between 70 and 75. they checked the wheels said they were all within spec but they went ahead and re balanced them anyway. they test drove it and said problem was still there. next they swapped out the rims and tires with another truck and problem still existed. then they rotated those new wheels and tires still no difference. technician took another truck for a test drive and said it did the same thing and that it must be normal for these trucks.

 

service adviser is waiting on the service manager to make a decision on what to do next. i really like my truck hope it gets fixed.

don't take normal as acceptable answer its not normal its a huge issue GM has.

 

Has anyone dealt with a GM field engineer? I have one coming next week to look at my truck.

Posted

So we got our 2014 rally 2 back after the final repair attempt with GM engineers. Unfortunately the problem is not resolved. They road forced the tires again and two were replaced which did not fix the issue. Here are some videos for you all that we've taken. The first one is our truck before the final repair attempt. The second video is a loaner they gave us. The third video is our truck after we got it back from the dealer. Have to say we are super disappointed. We love our truck so much :(

 

First video:

 

 

Second video:

 

 

Third video:

 

  • Like 2
Posted

send me your email I will send you some videos.

 

don't take normal as acceptable answer its not normal its a huge issue GM has.

 

Has anyone dealt with a GM field engineer? I have one coming next week to look at my truck.

We just got ours back from being with the GM engineers, they hooked up the PICO meter and drove it about 50 miles. They just changed out two tires. BUT our dealer has already road forced the originals tires, then changed out all four, after that they rebuilt the deferential and changed out the drive shaft. So they kind of did what they could already. Just really sucks :/ our dealership has been AMAZING to say the least and we are SO thankful they've stuck with us through all this. See my above videos for some reference.

Posted

We just got ours back from being with the GM engineers, they hooked up the PICO meter and drove it about 50 miles. They just changed out two tires. BUT our dealer has already road forced the originals tires, then changed out all four, after that they rebuilt the deferential and changed out the drive shaft. So they kind of did what they could already. Just really sucks :/ our dealership has been AMAZING to say the least and we are SO thankful they've stuck with us through all this. See my above videos for some reference.

So whats the next step?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Holy s**t - not much of a parts thrower you say? You BLASTED that thing with the parts cannon!  You'd have been probably $1,000 ahead if you had just brought it to a competent shop rather than shotgunning a bunch of parts it clearly didn't need.   Just FYI - oil additives are really, REALLY good at ONE thing ... and that's emptying your wallet. They're ALL useless gimmicks.   If that has the L94 or L99, then #7 is an AFM cylinder. I'd suspect a failed lifter in that case.   If you leaned on wiring, sensors, and/or connectors while changing the oil, you'll have to check all that to be sure pins didn't get pulled out, connectors broken, etc.. Old wire loom that was barely adequate when new is certainly brittle by year 19 - make sure wires aren't chaffed and shorting out somewhere where you might have leaned. or supported yourself on it.   If your a mechanic, why didn't you just find out what you were missing and troubleshoot from there??  TIMED spark, fuel PSI / injector pulse, air, compression.  Can't make ANY money going the parts cannon route.
    • LOL! Are you joking?? That wax SUCKS! 100% gimmick made to "look" good.    After just TWO winters I had severe surface rusting in patches over 90% of the frame. Only reason it looks great in the pics is because I SATURATED the frame every single fall with used motor oil for 14 of the 16 years I owned it. Otherwise it would've been sent to the crusher 8 years earlier with the speed it was rusting prior!    I sold that POS 3 years ago. Was a gigantic headache the second it rolled off the showroom floor. Brakes pulsated on the TEST DRIVE. Door trim fell off the 1st week! Interior squeaked and rattled, and the drivetrain clunked after 2k miles. 4x4 switch failed shortly after. Front end - ball joints, struts, hub bearings - all failed between 38k-50k. Engine started burning oil at 50k. Rear and and transmission failed before 100k. Nothing but problems, and frustration with the piss-poor engineering designed to make you give up. Well, it worked! Nothing on that truck was easy to remove ... except the wheels. They haven't figured out how to screw that up yet. Give 'em time ...   I won't make that mistake again. EVER.   Such fond memories ... https://postimg.cc/K1qf23tS  https://postimg.cc/gallery/X02z64J  https://postimg.cc/gallery/mHSRXZv  https://postimg.cc/gallery/D4mMRfL
    • Different monitors do their test only under conditions specific to that monitor.  you MIGHT find the drive cycle conditions for the monitor that isn't ready on this site: https://lemon-manuals.la/   If it's not there, then it should be on alldata.com for your truck, but it requires a paid subscription.   And you need to know which specific monitor isn't ready.
    • from another thread   Update...although the truck sometimes seems to idle weird and the transmission shift a little weird, I've driven about 7,000  miles and no issues.   However, the way GM has handled my rental reimbursement, the situation when my truck quit, and the recall in general has led me to this point...I have driven a GM vehicle for the past 46 years and unless I buy a C3 Corvette, this is the last GM vehicle I will ever own. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...