Jump to content

Recommended Posts

Posted

No way would I ever trade in this vehicle (or any vehicle for that matter). I too got a great deal on my XL Denali. I also received a decent "we are sorry for all of the shop time" payment from GM along with a healthy accessories credit (that I was going to spend anyway). I made it very clear that that was for issues to this point and that I still expected them to work to solve the vibration and buffeting. Unlike some, I am not dropping off my truck and letting it sit there until I see some type of traction being made here (like the two links showing the vibration fix for tires and drivetrain...They are working with me as best they can and because there is NOTHING that remotely comes close to this vehicle in comparison, I am sucking it up and hoping for a fix. Caveat - had a purchased this vehicle and not leased it I would have walked away after the first two weeks of troubles.

 

Walking away is probably easier BECAUSE you have a lease right? I leased mine last week, and already told the salesman I would be exchanging it/making them buy out the lease if it doesn't get fixed. I'll go buy another Tundra, I don't really care.

  • Like 1
Posted

Now that some 2016 models are on the lots, I'm really interested to hear some test drive reports to see if this vibration is still present. I know the main change is the cosmetic front end but all manufacturers have engineering change orders they introduce during the manufacturing process to fix problems that have been identified and most of these ECOs are never publicly acknowledged so I'm just curious if they made some attempt to address this problem in the 2016s. If the 2016s still vibrate like the 14s and 15s, then that tells me either they genuinely don't know the root cause(s) and the complete and final remedy or it's something in this current design that they can't reasonably or economically fix.

Posted

No way would I ever trade in this vehicle (or any vehicle for that matter). I too got a great deal on my XL Denali. I also received a decent "we are sorry for all of the shop time" payment from GM along with a healthy accessories credit (that I was going to spend anyway). I made it very clear that that was for issues to this point and that I still expected them to work to solve the vibration and buffeting. Unlike some, I am not dropping off my truck and letting it sit there until I see some type of traction being made here (like the two links showing the vibration fix for tires and drivetrain...They are working with me as best they can and because there is NOTHING that remotely comes close to this vehicle in comparison, I am sucking it up and hoping for a fix. Caveat - had a purchased this vehicle and not leased it I would have walked away after the first two weeks of troubles.

I got a great deal on mine also and if my truck thats been at the dealer does get fixed ( I'm not optimistic ) I will be on the horn with GM for a refund for the 5 weeks I have not had it and the aggrivation....if its not fixed I have to start the buyback / lemon law process
Posted

At the dealership today. They asked if my truck had a shake. I surprisingly said YES!! they proceeded to tell me there is a recall with a transfer case update. Anyone hear of this? I scrolled back a few pages but didn't see it. Goes in tomorrow for the hopeful fix!

Posted

At the dealership today. They asked if my truck had a shake. I surprisingly said YES!! they proceeded to tell me there is a recall with a transfer case update. Anyone hear of this? I scrolled back a few pages but didn't see it. Goes in tomorrow for the hopeful fix!

What vehicle do you drive.?

 

Sent from my SG Note 4 on Tapatalk

Posted

If it's the same I just had the transfer case recall done on my 15 6.2 LTZ and it's a reprogram to the tccm for cold weather operation of the 4 wheel drive system. Shouldn't have anything to do with vibrating.

 

Sent from my potato

Posted

I drive a 15 Sierra Denali 5.3L, had recall work done, believe it was the 4 wheel drive during cold weather reprogram..

 

Sent from my SG Note 4 on Tapatalk

Posted

/profile/6563-daveo/?do=hovercard" data-mentionid="6563" rel="">@DaveO

 

I have a $50k shaker.. I won't bore you with my problems.. New approach is I'm taking my truck to an auto expert for a complete vibration evaluation. Once they find the solution, I'll give GM one more shot to try and fix this POG. I'm half expecting the rear diff is the problem so first order is pop the cover and check the gears and backlash.

 

Might be less expensive for me to pay for the repairs than taking a $5-10k hit and trading it in for another brand.

 

I'm in the manufacturing business and have been involved in "Silent Recalls". I believe GM is well aware of the issue but the cost benefit analysis doesn't warrant a recall. Nobody had died yet from a shaky truck (but I'm having chest pains). They are spending most of their time dealing with ignition switch crashes and deaths so no help for the idiots that purchased a shaker.

Posted

/profile/6563-daveo/?do=hovercard" data-mentionid="6563" rel="">@DaveO

 

I have a $50k shaker.. I won't bore you with my problems.. New approach is I'm taking my truck to an auto expert for a complete vibration evaluation. Once they find the solution, I'll give GM one more shot to try and fix this POG. I'm half expecting the rear diff is the problem so first order is pop the cover and check the gears and backlash.

 

Might be less expensive for me to pay for the repairs than taking a $5-10k hit and trading it in for another brand.

 

I'm in the manufacturing business and have been involved in "Silent Recalls". I believe GM is well aware of the issue but the cost benefit analysis doesn't warrant a recall. Nobody had died yet from a shaky truck (but I'm having chest pains). They are spending most of their time dealing with ignition switch crashes and deaths so no help for the idiots that purchased a shaker.

I agree....being nobody's dying from a shaker they expect us to just deal with it
Posted

/profile/6563-daveo/?do=hovercard" data-mentionid="6563" rel="">@DaveO

 

I have a $50k shaker.. I won't bore you with my problems.. New approach is I'm taking my truck to an auto expert for a complete vibration evaluation. Once they find the solution, I'll give GM one more shot to try and fix this POG. I'm half expecting the rear diff is the problem so first order is pop the cover and check the gears and backlash.

 

Might be less expensive for me to pay for the repairs than taking a $5-10k hit and trading it in for another brand.

 

I'm in the manufacturing business and have been involved in "Silent Recalls". I believe GM is well aware of the issue but the cost benefit analysis doesn't warrant a recall. Nobody had died yet from a shaky truck (but I'm having chest pains). They are spending most of their time dealing with ignition switch crashes and deaths so no help for the idiots that purchased a shaker.

Make sure you have them check the pinion preload.

Posted

Set an appointment up at dealer last night for steering wheel resonance vibration.

 

Was lucky enough to meet another guy there with a vibrating Silverado, he filed lemon law so GM engineering was all over his truck.

 

He said that GM was going to put new tires on it, I laughed and said good luck.

 

I enlightened him on the 420 page forum, where GM has replaced shocks, tires, rims, driveshafts, axles, rear ends, shimmed motor mounts, found preloads on bearings incorrect, etc.

 

He was speechless

  • Like 3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Hello hello looking forward to expanding my knowledge of the 2026 2500 HD that I just bought.   Truck has 3500 miles on it four-wheel-drive crew cab and I’m about to put a 6 1/2 inch BDS lift on it 18 x 10 -25 offset with 37’s   Already have the wheels and tires just waiting on the lift install in about three weeks   Question what surprises am I not gonna be happy with?  I’m not new to lifted trucks so I know that acceleration towing gas mileage all that is affected..   Question is those of you that have this truck this powertrain with a 10 speed Allison and have done the mods that I’m doing,,, how bad is it? Is that Allison constantly gonna be hunting for the right gear to go into? And what about towing, acceleration, fuel consumption as mentioned?    Lastly how come I can’t find any ring pinion gear set up for these axles and when could I expect to see them?   I apologize if there’s any typos I’m doing speech to text on my iPhone.    
    • I've got a 2013 2500 6.0L Flexfuel. Drove the truck earlier today with no issues. Went to run an errand tonight and noticed key fob wouldn't work. Figured battery was dead, so replaced fob batter. Still wasn't working. Grabbed my other set of keys with the other fob and that one wasn't working either. So I manually unlock truck and insert key. Interior lights come on, dashboard lights up, turn key and truck starts. Turn truck off, like a moron, and try starting again. This time no crank, no click, no nothing. Lights still come on and dash lights up, but now I'm getting a service 4wheel drive, service tire monitor, etc. Check voltage on battery and Im showing 12.2v. Throw my battery charger on it and give it 15 mins and try starting again. But still no crank no start. Decide maybe its a bad battery, run to autozone grab a new one and put it in. Same issue. Disconnect battery and let it sit for 15 mins. Try again and still nothing. I had managed to roll the windows down earlier as its a humid night, but now I can't get them to roll up. Power locks are also not working now. Then randomly I try the key again, and it fires right up. Immediately I roll up the windows as we have nothing but rain forecast this week. I shut it back off wait 30 seconds and start up again. Worked a 2nd time. So turn it off, start putting things back together. Try one more time, and back to no crank no start. And now the car alarm starts going off. Had to disconnect battery and leave it that way for the night as I don't think my neighbors would appreciate my alarm going off again tonight. Any thoughts or help would be appreciated. 
    • No one will care for you like you care for you. Do what you can for as long as you can. IMHO of course. 
    • How about them NICKS!!! 
    • Hi there.  Long time lurker, first post.    i have read the previous posts regarding the water ingress problem with this emblem.  I bought my 1500 SLT the  summer of 2025 new and after reading the MANY problems with these emblems failing I decided to install one anyways.  As per a YouTube video, I sealed ( or tried to) this sign with silicone sealant around the outer perimeter joint and the holes that were already somewhat sealed on the rear plate of the emblem.  And installed the connector assembly using dielectric grease on the connectors. The installation looked great and worked well for about 4 months……then FAILURE.  Grrrrrr…… I live in the great white north and wash my truck weekly in an automatic car wash  to keep the salt off.  Let me tell you that removing the old, failed emblem is a whole different animal than removing the OEM individual letters without removing the grill assembly. Mainly because the illuminated logo is built differently than the original letters which  you can remove the red surface lettering with a knife or some kind of blade which gives access to the tabs which hold the logo onto the grill. So I had to essentially destroyed the old emblem to remove it. Doing so killed my chance of doing somekind of autopsy on the failed , old logo.  But there was plenty of water inside when I ripped it apart.  Prior to installing the new assembly I tried it with the old harness and it works fine.   Does anyone have any insight as to where the water is getting into this emblem? I intend to seal the new logo with slow curing epoxy this time around using a syringe.  I think this newer emblem may be an updated unit which I hope GM got the vendor to fix. It has an October 2025 date on it.    If this one  fails,  I am just going to revert back to the non-illuminated letters….AFTER PULLING THE GRILL.    Any thoughts on sealing with epoxy would be appreciated. Thx!   Doug  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...