Jump to content

Recommended Posts

Posted (edited)

Last summer the truck vibrated like hell at 75 so I took it to a Bridgestone dealer, they road forced and rotated the tires on my 20" rims, all was fine until local dealer rotated the wheels.

Now it vibrates at both 41-50 and around 75. But at 75 it comes and goes.

Contemplating just saying the hell with it and buying new 18" rims and tires.

Edited by Garykk
Posted

I think a lot of the problems come from the dealer's high tolerance along with GM's, take it to a reputable wheel/tire shop, heck even those little mom and pop tire shops do a better job.

  • Like 1
Posted (edited)

Last summer the truck vibrated like hell at 75 so I took it to a Bridgestone dealer, they road forced and rotated the tires on my 20" rims, all was fine until local dealer rotated the wheels.

Now it vibrates at both 41-50 and around 75. But at 75 it comes and goes.

Contemplating just saying the hell with it and buying new 18" rims and tires.

It won't help. It's not wheels and tires unless you have damage. I went from 20s to 18s and the shake continues. Now I'm just systematically replacing crap to make it tolerable. Individual battles are won with this issue, but we are losing overall. Too many variables. Too much time wasted. And time is money. Edited by Severado
Posted

I haven't read this thread since I traded my 14 in on an HD.. I can't believe that this is still an issue... SMH

 

My solution to the vibes on my second 14 was a new set of Nittos. After I got installed the new tires, my vibrations we're gone. (72+)

Posted (edited)

Update on the 2017 All Terrain...

 

Just got word that the dealership is getting sent a "perfect set of SRA's"

 

They did find one tooth on the ring and pinion that was out of spec, driveshaft runout was fine but the interesting area is they replaced the axles. The flanges were out of spec and gave a tire 1 lateral runout reading.

 

So long story short new gears and axles and matched and staggered special tires. I feel like Cole Trickle now[emoji23]

 

I'm cautiously optimistic but they have put the time into this which speaks highly of my dealership and district rep.

 

 

Edited by AllTerrain13
Posted

Update on the 2017 All Terrain...

Just got word that the dealership is getting sent a "perfect set of SRA's"

They did find one tooth on the ring and pinion that was out of spec, driveshaft runout was fine but the interesting area is they replaced the axles. The flanges were out of spec and gave a tire 1 lateral runout reading.

So long story short new gears and axles and matched and staggered special tires. I feel like Cole Trickle now[emoji23]

I'm cautiously optimistic but they have put the time into this which speaks highly of my dealership and district rep.

With that setup you could pass on the outside!
Posted (edited)

Last summer the truck vibrated like hell at 75 so I took it to a Bridgestone dealer, they road forced and rotated the tires on my 20" rims, all was fine until local dealer rotated the wheels.

Now it vibrates at both 41-50 and around 75. But at 75 it comes and goes.

Contemplating just saying the hell with it and buying new 18" rims and tires.

I tried that

With zero good results

Edited by bosro
Posted

Just thought I'd throw this out there. Last weekend I was working on my moms 2012 Kia Optima for her when I noticed a ticking sound in the engine that I assumed was from the serpentine belt. Kia and Hyundai recently recalled 1.4 million engines for poor manufacturing, so to be safe I sent it in to be inspected by the dealer. They are now replacing the whole engine with a brand new one..... Now thats good customer support!

  • Like 3
Posted

Update on the 2017 All Terrain...

 

Just got word that the dealership is getting sent a "perfect set of SRA's"

 

They did find one tooth on the ring and pinion that was out of spec, driveshaft runout was fine but the interesting area is they replaced the axles. The flanges were out of spec and gave a tire 1 lateral runout reading.

 

So long story short new gears and axles and matched and staggered special tires. I feel like Cole Trickle now[emoji23]

 

I'm cautiously optimistic but they have put the time into this which speaks highly of my dealership and district rep.

 

 

You got lucky getting Harry Hogge as your service writer.

Posted

Just thought I'd throw this out there. Last weekend I was working on my moms 2012 Kia Optima for her when I noticed a ticking sound in the engine that I assumed was from the serpentine belt. Kia and Hyundai recently recalled 1.4 million engines for poor manufacturing, so to be safe I sent it in to be inspected by the dealer. They are now replacing the whole engine with a brand new one..... Now thats good customer support!

 

 

Well that's just the normal everyday kind of service people get when they spend a large amount of money on a new vehicle, nothing special about that. Err, Umm wait, never mind :(

  • Like 2
Posted

Well that's just the normal everyday kind of service people get when they spend a large amount of money on a new vehicle, nothing special about that. Err, Umm wait, never mind :(

Have a daughter that drives a 2012 Sonata that was on the list. Had it checked out and was found to be ok. The difference to this problem vs the topic of this thread is Hyundai had found and was able to isolate the problem to a specific run of crank shafts of which the oiler holes were not cleaned properly of shavings after being drilled. I "think" the service rep told me that it was about a 10% problem but not sure. Anyway, being this was a specific documented process problem of which all the details were known Hyundai only had only two choices; do a major recall with a very expensive solution or face a huge class action lawsuit with an even more expensive solution. So, the choice was very simple for Hyundai. Btw, agree it's a great car and has been virtually problem free. But, so has my 2015 6.2 LTZ. In fact, after having made a 250 mile tow with my 6,000 lb TT to a remote area of Texas, I'm keying this right now on the trucks wifi, the 6.2/8 spd combo is great for towing and love the wifi feature

Posted (edited)

 

 

Well that's just the normal everyday kind of service people get when they spend a large amount of money on a new vehicle, nothing special about that. Err, Umm wait, never mind :(

hahaha, I expect that kind of service when I spend a shit ton on money on something.... too bad our "favorite" company doesn't agree.

 

Have a daughter that drives a 2012 Sonata that was on the list. Had it checked out and was found to be ok. The difference to this problem vs the topic of this thread is Hyundai had found and was able to isolate the problem to a specific run of crank shafts of which the oiler holes were not cleaned properly of shavings after being drilled. I "think" the service rep told me that it was about a 10% problem but not sure. Anyway, being this was a specific documented process problem of which all the details were known Hyundai only had only two choices; do a major recall with a very expensive solution or face a huge class action lawsuit with an even more expensive solution. So, the choice was very simple for Hyundai. Btw, agree it's a great car and has been virtually problem free. But, so has my 2015 6.2 LTZ. In fact, after having made a 250 mile tow with my 6,000 lb TT to a remote area of Texas, I'm keying this right now on the trucks wifi, the 6.2/8 spd combo is great for towing and love the wifi feature

Sorry SB, but if you really believe that GM doesn't know the root cause of the problem I'm going to think that you're just delusional and a GM blowhard.

 

As for the KIA/Hyundai recall, if 1.4 million engines that are being recalled, its more than 10% of production. By the way, this is the second recall on the Hyundai side for this issue They aren't big enough of a brand for it to be that small of a percentage. In 2016 the two brands together sold about 1.35 million vehicles total. With this recall affecting:

2013-2014 Hyundai Sonata's and Sanata Fe's (617,334 sold)

2011-2013 Kia Sportages (116,785 sold)

2011-2014 Kia Optima (551,902 sold)

2012-2014 Sorrento (327,766 sold)

 

1,613,787 million total US sales for these vehicles across their respective recall years.

 

86.75% of total sales for these respective models years have been recalled over the concern

Edited by 2016 Ferd
  • Like 1
Posted

Last month I purchased a 2017 GMC Sierra All Terrain X - Came with the Nitto Grapplers rather than the Goodyear tires.

 

Within two weeks it started vibrating and was making me nauseous at speeds above 40 but was the worst 65+ - I brought it to my local dealer and had a tech drive with me. He claimed it was the transmission and they flushed the fluids 3 times. This corrected the issue for 300 miles but now the vibration has returned.

 

After contacting the dealership that the issue returned they basically blew me off. I went back to the original dealership that I purchased the truck from and had their tech drive it with the picoscope. He said he has been a GM tech for 20 years and while they can re-balance the tires he is doubtful there is a fix for my truck. He said it is within specs but does spike occasionally and he does feel the vibration.

 

They offered me the other All Terrain X they had on their lot and that one shakes worse than mine does (it has the Goodyear tires).

 

Anyone have an X that doesn't shake?

  • Like 1
Posted

Last month I purchased a 2017 GMC Sierra All Terrain X - Came with the Nitto Grapplers rather than the Goodyear tires.

 

Within two weeks it started vibrating and was making me nauseous at speeds above 40 but was the worst 65+ - I brought it to my local dealer and had a tech drive with me. He claimed it was the transmission and they flushed the fluids 3 times. This corrected the issue for 300 miles but now the vibration has returned.

 

After contacting the dealership that the issue returned they basically blew me off. I went back to the original dealership that I purchased the truck from and had their tech drive it with the picoscope. He said he has been a GM tech for 20 years and while they can re-balance the tires he is doubtful there is a fix for my truck. He said it is within specs but does spike occasionally and he does feel the vibration.

 

They offered me the other All Terrain X they had on their lot and that one shakes worse than mine does (it has the Goodyear tires).

 

Anyone have an X that doesn't shake?

Please look up the lemon law requirements for your state. Keep taking it back to the dealer. Make sure you press them on detailed documentation and do the same for yourself. Sorry this is happening to you. Good luck.
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • The part # is 84520447, mine does not have the cooled seats but I'm willing to possibly change the cover and foam if needed.   I tried that site and a few others,  added to cart and then paid. About an hout later I received a refund stating it has been discontinued. 
    • Thought I would add to what Bruce answered, not only do the HD models use the torsion bar system, there are I believe 5 different torsion bar spring ratings that are all physically interchangeable with all the HD trucks going from a two wheel drive 2500 all the way up to the duramax or a gas engine truck with a snow plow prep package front end weight capacity that use the maximum sized torsion bar. It starts from a 4400 lb rated set in 400 lb increments up to 6000 lb. If one wants to fine tune the ride for a certain truck application they can swap out the torsion bars. 
    • First off pay close attention to what Newdude pasted as he is a GM tech !.    I have a couple of questions which might cross off some questions others on this forum would be wondering about as well. So when was the engine oil changed prior to this trip, was it almost brand new oil or did it already have a fair bit of use on it before you started the trip.   Did you check the oil level on flat ground and was it at the full mark just before leaving on this trip which I gather from google map is about 700 miles or so. Why I ask and this is not the first time in history that has happened, that either a dealer or some other shop changed the oil on the vehicle and the vehicle left the shop and the owner ( you ) assumed the engine oil was full but in reality the person who changed the oil simply did not put enough oil into the engine .. it happens !. Also that a shop put the wrong viscosity oil in and an engine was not happy with that thinner viscosity and oil got past the rings at a higher rate than the proper viscosity. Not to mention if there was any leaking out of a drain plug or the filter gasket etc. 
    • You could, although in the end it really doesn't make much difference what comes out in exact terms since it comes down to putting enough back in so that there is enough volume so that something flows back out once the trans is up to temp for the check procedure. I presume your putting a pan on that has a drain plug but its probably the same pan mold/size as at least a while back no extra volume pan was made for the gas truck version due to the exhaust cross over pipe issue. All I can say as per volume I put back in and this was based on changing out the filter as some is trapped in it that does not come out until its removed because of the way its made inside and my truck had sat over night with the trans having been hot when shut down and dripping internally before I pulled the pan. I went off of what the trans shop suggested as a minimum volume he found worked which was 9 1/2 quarts and I had enough flow out of the stand pipe that I knew I was right on the money once it slowed to a dribble and never wasted hardly any oil but it would be totally fine to throw in a full 10 quarts too. I guess personally I wouldn't ruin a perfectly good pan by drilling a hole in it, not with the cost of replacement pans up here or the dorman one anyway with the drain was 500.00 when I priced one out a while back, totally stupid.    I might not have said before but this trans oil type really expands with heat and I think its been said on this forum and the trans shop said the same so I wanted to try and hit the lower temp of the range vs at the top or go shooting above it as that would allow more oil to flow out which wouldn't be ideal. 
    • Since I am going to be replacing the pan, I am just going to drill a hole in the original to drain it so I will be able to catch the fluid easier and measure how much I took out.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...