Jump to content

Recommended Posts

Posted
On 3/19/2019 at 12:19 AM, Mozzer said:


 

 


They use some liquid with molasses & some other stuff round here (Vernon, British Columbia) when it isn't too cold. That stays on the road when put down before snowfall rather than flying off like the salt.

No idea what molasses do for rust though.emoji848.png



Sent from my Moto Z2 Play using Tapatalk
 

 

We just got a good rainfall the other day, it was badly needed to remove some of the salt residue on the roads. It looks like winter is almost over where I am, although you never know...last April 15th we got a few inches, and of course the road brime and salt stayed around until May.

 

I really am kind of on a quest to keep this truck "rust free", or close to it. How long I'll be on this kick I don't know. Lol. But right now I'm still hot on it. I'm actually excited to get under it and clean up some spots and apply another coat of protection. I think I'm getting really weird. I go through these fazes.

  • 3 months later...
Posted

I have a 2015. I live in MA, made a point of washing off salt during the winter months, didn't do much good,  29k on odometer frame is rusting, it's past the 3 year bumper to bumper so I guess I'm out of luck..

  • 2 weeks later...
Posted
On 6/27/2019 at 3:59 PM, jimlenk62 said:

I have a 2015. I live in MA, made a point of washing off salt during the winter months, didn't do much good,  29k on odometer frame is rusting, it's past the 3 year bumper to bumper so I guess I'm out of luck..

It's only cosmetic but i do agree it looks poor when it browns up and flakes off leaving rust patches. Gm has been this way since i started driving back in the early 90's, all my trucks after a couple years living in mass also have turned that way with the wax coating they have used for decades. One thing though at least i have never had a single issue with frame rot, rust yes but not rot thankfully.

  • 1 month later...
Posted

What does everyone do about winter prep for the trucks? The wax is slowly falling off of mine. So I was thinking of cleaning it then sealing it was a rust prevention chemical and then reapplying the wax again? Is that worth doing or is better to paint the areas of the frame I clean with actual paint?

Sent from my Pixel 2 XL using Tapatalk

Posted (edited)
10 hours ago, Rock1500 said:

What does everyone do about winter prep for the trucks? The wax is slowly falling off of mine. So I was thinking of cleaning it then sealing it was a rust prevention chemical and then reapplying the wax again? Is that worth doing or is better to paint the areas of the frame I clean with actual paint?

Sent from my Pixel 2 XL using Tapatalk
 

The wax is useless IMO.

 

If you prep and apply a protective coat (1000s of options), combined with spray on rust-inhibitor - I think you will have the best results. The rust-inhibitors can be wax based, or oil based. Some have negative results due to the oil in them, which tends to swell different types of rubbers. Hoses and grommets and bushings are places to avoid the oil-based ones.

 

The main points where the rust starts to form will be edges, bends, or the points where the lift contacts on the chassis. The tubular support going through each chassis rail is a very susceptible location.

 

You will not fully prevent rust, just slow the process. So dont get too frustrated with rust. It will be an ongoing process for the life of your vehicle. However, there are lots of ways to manage and reduce the rust, focus more on those!

Edited by tanner709
  • 2 weeks later...
Posted

I'm having this issue right now too. 2016 with 50k km. Thinking I'll just get the whole frame redone down the road. Surface rust won't hurt anything.

  • 1 month later...
Posted

GMC = RUST

Both bumpers had rust through ( from the inside out ) within a year of ownership.... dealer replaced both and told me I should have waxed it.

Had the frame wax recall treatment.... it lasted two years. found out it is a one time deal...... even if put on incorrectly.    You can see where the pads from the lift contacted the frame before it had set up.....   in a hurry ????

 

Posted
On 6/28/2018 at 5:53 PM, EnviroGreensolutions said:

You should be using Kryptonite Metal Treatment which is what GMC suggest you use for any corrosion, we are the only authorized product for it, we currently sell a bundle package with has the PurePrep + 3 cans Kryptonite you can purchase it on our website or on amazon.com

 

Best of luck!

EnvirogreenSolutions.com

That is what my dealer used......   it lasted 3 years and it is now peeling off......

They told me it was a one time treatment covered.... and now offered to use a rubberized undercoating    no charge.  

Any opinions ?

On 6/28/2018 at 5:53 PM, EnviroGreensolutions said:

 

 

Posted
6 hours ago, Whatever64 said:

That is what my dealer used......   it lasted 3 years and it is now peeling off......

They told me it was a one time treatment covered.... and now offered to use a rubberized undercoating    no charge.  

Any opinions ?

 

Stay away from rubberized undercoating that's all I can say on the matter.

Posted
On 10/23/2019 at 4:02 PM, High Country 6.2L/8 said:

Stay away from rubberized undercoating that's all I can say on the matter.

The dealer said rubberized and gave me the name Cal-Tex. On line it says it is " A paraffin-based material, our Rust Inhibitor keeps moisture from corroding inner body panels from the inside out. Not only does Rust Inhibitor help reduce rust and corrosion, but it also helps protect against salt and humidity. "

 

Posted
20 minutes ago, Whatever64 said:

The dealer said rubberized and gave me the name Cal-Tex. On line it says it is " A paraffin-based material, our Rust Inhibitor keeps moisture from corroding inner body panels from the inside out. Not only does Rust Inhibitor help reduce rust and corrosion, but it also helps protect against salt and humidity. "

 

I have something similar that dealer applied when new and apparently is GM approved whatever that means lol

Posted
What does everyone do about winter prep for the trucks? The wax is slowly falling off of mine. So I was thinking of cleaning it then sealing it was a rust prevention chemical and then reapplying the wax again? Is that worth doing or is better to paint the areas of the frame I clean with actual paint?

Sent from my Pixel 2 XL using Tapatalk


Some of us oil undercoat, speaking of which; I have to get done next week...

That's the only thing I've found that works in the salt belt...when I lived in the snow belt, I sprayed once a year; now I live just south of the snow belt and spray once every two years.

I have very little rust on my truck's frame and no rust on body panels, it's a 2012 with 170k miles.

Sent from my SM-G950U using Tapatalk

Posted
7 minutes ago, sdeeter19555 said:

Some of us oil undercoat, speaking of which; I have to get done next week...

That's the only thing I've found that works in the salt belt...when I lived in the snow belt, I sprayed once a year; now I live just south of the snow belt and spray once every two years.

I have very little rust on my truck's frame and no rust on body panels, it's a 2012 with 170k miles.

Sent from my SM-G950U using Tapatalk
 

Have a 17 dealer did the undercoating from new plus a rust module no rust yet and I live in Nova Scotia where there's lots of winter salt

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I agree, simplicity and reliability matter more as vehicles get more complicated. A V8 work truck option with fewer electronic features and a stronger warranty would definitely appeal to a lot of buyers who use their trucks for real work. Customizing it with trusted outfitters is often the best way to get exactly what you need.webcrimsNY
    • I’ve heard similar complaints from newer vehicles where the factory “premium” systems don’t always live up to expectations. A good installer should be able to improve the sound without turning it into a bass-heavy setup. I’d look into upgrading the front speakers, adding a quality DSP amplifier, and possibly improving sound deadening first—those changes usually make a much bigger difference than just adding a subwoofer. Hopefully someone local can recommend a reputable installer in the Las Vegas/St. George area.
    • Do you remember that Harley Davidson was more successful (solvent) when it produced about 60% of the market demand (by design) and forced wait times of up to three years? Even when your turn came around it was, "Take what we are giving you or move to the back of the line and start over". HUGE markup's were 'normalized' and dealer killed. 40% markup and no floor plan? What's not to love? Greed will kill them yet. They have surplus production and customer base is tanking. And still they think nosebleed pricing will work.  
    • The engine was done as part of the 6.2 recall?   You'd have to see if your VIN also has the 6.2 engine special coverage on it.  Coverage number is N252494003.  If you have this, your engine is covered under this and NOT the GM replacement part engine warranty which is 3yr/100k from the date of install.  The 3yr/100k mi warranty is in effect for non warranty purchases.     This is not any different if it was replaced under warranty without a recall or special coverage.  So if you had a 5.3 and it popped at 3 years in at 50,000mi during the 5yr/60k powertrain, the replacement engine would not get the 3yr/100k, and instead gets the remainder of the 5yr/60k as coverage.     So N252494003 gives 10 years or 150,000mi of coverage, which ever comes first, starting at the vehicle in service date.  So if your in service date is 01/01/2022, N252494003 gives you special coverage of the engine until 01/01/2032 or 150,000mi, whichever comes first.  So if your start date was 01/01/2022, you'd have left 5 years and 4 months (lets round to august 1st), or 62,000mi left of coverage.   So you need to know your in service date to know how much coverage is left.  
    • Okiee dokie there bud, way to take things to the extreme.   I guess you missed the whole point and take things way to serious. I installed different EV6 style injectors that just so happen to be larger in my car running the same LQ4 engine and with a better spray pattern than the stock style injectors and I noticed no difference in the idle quality. Kinda was my round about way of saying that even if you put the same size but better style injectors in your truck, you will likely see the same thing.    I'm sure you're great to have conversations with in person if that's how you act through a keyboard. One little things sets you off and now I guess my dick is all up in your face.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...