2014+ K2XX - Center Console Swap / Retrofit - Plug and Play Harness!

[pgamboa]

Phil,
 
do you have any advice or instructions on upgrading the radio in a 2015 Tahoe PPV running IO3 to the IO6 8'inch screen apple and android play  I know that I need to replace the HMI to HMI2.5, radio and navigation module.   I was told that I pretty much will have to rewire the entire dash but I have seen systems that say 90%plug and play. 
 
Aso since I am upgrading my pump seat to a center console will I need to also order your plug and play harness and will yours work on a US tahoe PPV as well.

Do you have an HMI now?


Sent from my iPhone using Tapatalk

[Ruben.Genera]

Phil, 

How do I go about ordering your harness?

[captadamnj]

On 9/11/2019 at 8:44 PM, pgamboa said:

Please email me at [email protected] to validate your build and get you ordering instructions.  When emailing, please provide me the year of your truck and pic of the front dash showing the radio/screen

Phil's been pretty consistent to those who ask about how to order, go ahead and e-mail would be my suggestion to get in his queue.  Thumbs up from me for Phil and this upgrade, good luck!

[pgamboa]

Phil, 
How do I go about ordering your harness?

I’ve got these harnesses loaded on my website.

For 2015.5 - 2018 (2019 LD and HD trucks)
https://harnessdr.com/product/16-pin-center-console-conversion-harness/

For 2014 and early 2015
https://harnessdr.com/product/23-pin-center-console-conversion-harness/



Sent from my iPhone using Tapatalk

[pgamboa]

I’ve been busy getting the website ready and now able to take orders for **most products.

HarnessDR.com

Refinements are being made daily.


Sent from my iPhone using Tapatalk

[Dutchy]

If for some reason anyone wants to go from a full center console to a jump seat I have one to get rid of. It's black leather, in excellent condition, and still has the factory 23 pin harness in it. I also have the ash tray and the two plastic trim pieces. I can't upload the photos for some reason. If you're interested message me and we can figure a way to get you the pics. Sorry for the inconvenience. 

Edited September 28, 2019 by Dutchy
Missing info

[Gunner53]

35 minutes ago, Dutchy said:

If for some reason anyone wants to go from a full center console to a jump seat I have one to get rid of. It's black leather, in excellent condition, and still has the factory 23 pin harness in it. I also have the ash tray and the two plastic trim pieces. I can't upload the photos for some reason. If you're interested message me and we can figure a way to get you the pics. Sorry for the inconvenience. 

nevermind, misread, thought you went to a jump seat.

Edited September 28, 2019 by Gunner53
Misread

[Dutchy]

7 minutes ago, Gunner53 said:

What year do you have and where you located?

Shoot, sorry. I must've really not been paying attention to what I was doing. It's out of a 2014 GMC Sierra 1500

Edited September 28, 2019 by Dutchy
Damnit

[Dutchy]

7 minutes ago, Gunner53 said:

What year do you have and where you located?

Shoot, sorry. I must've really not been paying attention to what I was doing. It's out of a 2014 GMC Sierra 1500 I'm in Columbus junction, IA

[Dutchy]

This is out of a 2014 GMC Sierra SLT 1500

[JonnyB]

On 9/8/2019 at 4:15 PM, RoflCopter726 said:

A little late getting to this, but I finished my console swap two weeks ago. pgamboa can add another check mark to his success stories here. The ordering process was quick and painless (except for the hit to my wallet ), but this was definitely worth every penny and much easier than sourcing everything yourself. All the parts arrived ahead of pgamboa's estimated time of arrival, his harness is very impressive and well constructed. I wouldn't be surprised if someone told me it was an OEM part without knowing anything about it. The console itself came packaged very securely with tons of packing material and a sturdy box, no damage or defects at all. It took a buddy and I about 2 hours to get it installed. All USB ports, the 110v Outlet, 12v outlets, and wireless charger are working, the only thing that doesn't seem to be working is the AUX port inside the console. But, my phone does not have a headphone jack so I'm not sure it would be used anyway. I was also able to retain glove box USB functionality as well.

Before:

 

Shipping Box:

 

Console and Bracket:

 

Finished:

 

 

My 3.5mm AUX Jack isn’t working either after completing the center console swap. Everything else however does work. Prior to installing my aux worked fine in the jumpseat console. Now when I connect my phone with an aux cable and click Media on the radio it says no media found. Anybody know why?

[Mankato]

Does anyone know if the 110 outlet wires will fit backwards?  Everything worked except the 110 after install but that's all I couldn't test.  Then when I actually tried to use it months later it does not work.  I tried pulling the wires to see if they swap today and couldn't get them out.  Is there a trick to that also? 

[pgamboa]

38 minutes ago, Mankato said:

Does anyone know if the 110 outlet wires will fit backwards?  Everything worked except the 110 after install but that's all I couldn't test.  Then when I actually tried to use it months later it does not work.  I tried pulling the wires to see if they swap today and couldn't get them out.  Is there a trick to that also? 

The connectors are keyed to only fit in one way.

[AcVynom06]

On 12/13/2017 at 7:35 PM, pgamboa said:

Jump Seat to Full Center Console Retrofit 
Plug and Play Harness by PGAMBOA

 
 
For those of you looking to swap your Jump Seat to a Full Center Console, I now have a Plug and Play Harness for this upgrade!  This long awaited - PnP Harness will allow you to EASILY perform this upgrade.  NO cutting or splicing needed!
 
Center Console - Plug and Play Harness is $150 Shipped anywhere in the US. For Canada, please add $24.95.
 
Since there are several versions and configurations of center consoles and truck trim levels, I feel that I have covered a majority of the configurations that are out there.  There will be several assumptions on the ability to perform this upgrade and I’ll try to be as detailed and comprehensive as possible.
 
Please see the different USB Cable configuration diagrams at the end.
 
Assumptions:
 
- 2014-2015 Center Consoles will have different USB Cable requirements than 2016-2017 AND will have different USB Hubs.  The PnP Harness should be compatible, but you MUST verify the connector under the passenger AND the front of the console!  Since this is a custom product, there will be NO REFUNDS on it.
 
- Center Console MUST have its factory harness intact and not modified.
 
- Connection under the Passenger Seat AND Front of Center Console must look exactly like the diagram.  There is a variant X314 Connector under the seat, so yours MUST match in order for this harness to adapt. 
 
- Additional GM USB Cables must be purchased separately (based on your console year) to get USB Hubs functional.
 
- Wireless Charging - Wireless Charging became available on 2016 and 2017 consoles.  If you are looking at adding a Wireless Charging Lid to a 2014-2015 Console, please PM me for requirements.  Also, there are known issues with 2016/2017 Consoles with the Wireless Lid and charging iPhone 8 and iPhone X Phones.  There are workarounds for this that require some form of modification to the charging module.  You can also swap the module for a 2018 Module that DOES charge iPhone 8 and iPhone X phones.  Please PM me for questions on specifics.
 
- Your truck MUST have an existing 110V AC Outlet AND (1) - 12V DC Cigarette Lighter Plug as you will be reusing those.  My PnP Harness DOES NOT add the 110V AC Outlet if you don’t already have it.  However, I CAN add an additional 12V DC Outlet connection if needed.
 
- USB Cable connections will come from your HMI (Behind the Glove Box).  You MUST verify that you have the USB Ports available, otherwise, your USB Hubs will not work correctly.
 
- This PnP harness DOES NOT add any Car Play, Apple Play, or Android Play functionality.  If your truck did not already come with it, you will not gain it.
With this PnP Harness, you ***should*** have ALL the components in your console functional.
 
Those options include:
 
Front of the Console:

• Front - Left USB Hub (Dual USB - 2016/2017or Triple USB Hub 2014/2015 - Uses my Plug and Harness AND a USB Cable from the HMI
• Front - Left 12V DC Cigarette Lighter Outlet - Uses existing connections (truck must be equipped.  If not, I can custom add this if needed)
• Front - Right 12V DC Cigarette Lighter Outlet -  Uses my Plug and Play Harness
• Front - Right 110V AC Outlet - Uses existing connections (truck must be equipped)

 
Inside Storage Compartment:

• Inside - Left 12V DC Cigarette Lighter Outlet - Uses my Plug and Play Harness plugged into the front main 42-Way Connector
• Inside - Right USB Hub - Uses my Plug and Play Harness plugged in the front main 42-Way Connector and USB Cable
• Inside - LED Lamp - Uses my Plug and Play Harness plugged into the front main 42-Way Connector
• Wireless Charging Lid (2016-2017 only) - Uses my Plug and Play Harness plugged into the front main 42-Way Connector

 
Rear of the Console:

• 12V DC - Cigarette Lighter Outlet - Uses my Plug and Play Harness plugged into the front main 42-Way Connector

 
THERE IS A LOT TO CONSUME HERE, SO PLEASE PM IF YOU HAVE QUESTIONS ON THIS.  I WANT ENSURE THAT YOU UNDERSTAND ALL THE REQUIREMENT FOR THIS RETROFIT BEFORE PURCHASING.
 
 








 
 
 

16-Pin - Plug and Play Harness


23-Pin - Plug and Play Harness

 

[AcVynom06]

Where can I order this pnp harness