Jump to content

Chirping? noise when accelerating

Music Junkie
 Share

Recommended Posts

Sierra Dan Senior Enthusiast

Sierra Dan

Posted
Posted

The only time mine ever chirped was switching from V4 to V8.

It was a Single Chirp and could happen at any speed.

This noise in the video comes on after some time and if you are on the gas the flapper will be open as the extra exhaust gas force keeps it open under V8 and throttle.

  • Replies 37
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Music Junkie
Music Junkie

Nope, all US units....  My boss does a TON of driving for work, and replaces his truck every 5-7 years, as his mileage is quite high.  The body and interior are immaculate.  The engine does have a lit

Darmichar Enthusiast

Darmichar

Posted
Posted
4 minutes ago, Sierra Dan said:

The only time mine ever chirped was switching from V4 to V8.

It was a Single Chirp and could happen at any speed.

This noise in the video comes on after some time and if you are on the gas the flapper will be open as the extra exhaust gas force keeps it open under V8 and throttle.

There aren't many things on a truck that can make that noise at speed.  Just trying to narrow down places to look that could potentially be it.

Music Junkie Enthusiast

Music Junkie

Posted
  • Author
Posted

I read some articles about driving in M5 mode and tried that.  Same problem though.  My next step is to try wiring/clamping the valve open to see if that works.  I agree that it is good to eliminate possibilities...  It seems like it is something motor/exhaust related as it fluctuates in correlation with stepping on the gas pedal and letting off of it.  It's not always at 3,000 rpm, but that seems like the hot spot.  As you could hear it slows down immediately after letting off the gas pedal.  Picks right back up when I hit it again. 

 

Stupid question....., but is "chirp" the right word to describe that sound?

99Mastercraft Enthusiast

99Mastercraft

Posted
Posted

My truck was making a “chirping” noise and noticed it when it was in v4/v8 mode transition... clamped the valve open.. noise gone.

 

i agree with the other guys, something cheap and easy to narrow down

Darmichar Enthusiast

Darmichar

Posted
Posted
11 hours ago, Music Junkie said:

I read some articles about driving in M5 mode and tried that.  Same problem though.  My next step is to try wiring/clamping the valve open to see if that works.  I agree that it is good to eliminate possibilities...  It seems like it is something motor/exhaust related as it fluctuates in correlation with stepping on the gas pedal and letting off of it.  It's not always at 3,000 rpm, but that seems like the hot spot.  As you could hear it slows down immediately after letting off the gas pedal.  Picks right back up when I hit it again. 

 

Stupid question....., but is "chirp" the right word to describe that sound?

From what I can hear in the videos, yes, 'chirping' would be an accurate description.

Music Junkie Enthusiast

Music Junkie

Posted
  • Author
Posted

Well, I wired the little valve open and took it for a test drive......  No go....  :sigh:

 

I wish I had some rollers to put the back end on.  That way I could put it under load and open the hood to see if I could get a better grip o where the sound is coming from.  It's hard to tell while driving down the road.  Back to the drawing board.

 

Any other ideas of things to check?

Music Junkie Enthusiast

Music Junkie

Posted
  • Author
Posted
14 hours ago, Racindave said:

That sure sounds like a pulley to me... any belt debris in that area?

Pulley was my first thought.  Right before I received the truck ad new water pump and tensioner pulley were put on.  When I got it, I fixed the brakes and have been working on this problem since.  I took it into a repair shop and they said it was the alternator and they wanted $690 for a new alternator and serpentine belt.  I bought a new alternator (AC Delco) and a new serpentine belt for under $300 and changed it out in about 30min or so.  I was hoping that was going to fix it, but it was a no go.  That is why I came here.  I was hoping someone else had gone through this and could help out.  The hard part is that I can't get a great sound clip, and even if I could, it is hard to tell where it is coming from.  I am going to try and have my buddy stand outside and I am going to drive by him and see if he can get a sound clip that is any clearer.  Also, maybe he will be able to identify more closely where it might be coming from.  It could be the AC pump.....  I tried turning the AC off, but it still makes the sound.  That rules out the clutch (I think).  It could still be the pulley.  I used a stethoscope to try and hear if one of the pulleys was bad, but to be honest, there is a lot of noise in there as it does have high mileage.  Also, I am not very well versed in what I should be hearing or not hearing when it comes to that. 

 

 

Racindave Enthusiast

Racindave

Posted
Posted

Does it have an idler pulley? Might be a cheap stab in the dark. From what i hear  I would almost put money on it being a pulley. 

Music Junkie Enthusiast

Music Junkie

Posted
  • Author
Posted
1 hour ago, Racindave said:

Does it have an idler pulley? Might be a cheap stab in the dark. From what i hear  I would almost put money on it being a pulley. 

Is the idler pulley the same as the tension pulley?  Sorry for my ignorance....  It looks like the serpentine belt goes around the main engine pulley, the water pump pulley, the tension pulley and the alternator pulley.

Lsgun1 Enthusiast

Lsgun1

Posted
Posted

Like I said last week, take the belts off and drive. If there's no noise it's on the accessory drive. Pretty simple.

Music Junkie Enthusiast

Music Junkie

Posted
  • Author
Posted
1 hour ago, Lsgun1 said:

Like I said last week, take the belts off and drive. If there's no noise it's on the accessory drive. Pretty simple.

I am very nervous about doing that.  Considering this engine has 219K miles on it and that I need to get it up to 3,000-4,000 rpm under load to get the noise to start.  I have heard that even running them around the block without the belts can pop a gasket or warp a head.  Especially with the aluminum components.  Back when they were cast iron it was a different story.  Maybe I am worrying too much about that......  If you have done it, and others have too, maybe it's not as big a deal as I am imagining....

Lsgun1 Enthusiast

Lsgun1

Posted
Posted

You have a temp gauge, watch it. You shouldn't need more than 5 minutes to figure it out.

miker2702 Enthusiast

miker2702

Posted
Posted
On 6/27/2019 at 2:50 PM, Darmichar said:

That sounds like it could be the flapper valve oscillating with the exhaust.  I'd clamp it open and drive the truck and see if it stops making the noise.

Yep. Same issue took me awhile to figure out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Coastie05
      It's Been a Long Time...

      By Coastie05 · Posted

      Welcome back!
    • davester
      New to Me 2010 SLE (Quirks, Issues)

      By davester · Posted

      not all plugs will be used.  gm uses more generic harnesses that support most/all options, and if your truck doesn't have a specfiic option, the plug won't be used (commonly will have a dummy insert in the plug , or it'll be taped up, but some may just be left as is).  But it's sldo possible some p.o. has installed the wrong/cheaper parts that aren't correct for your vehicle...
    • fm2176
      New to Me 2010 SLE (Quirks, Issues)

      By fm2176 · Posted

      First off, I'm not trying to just get easy advice/fixes for the issues I've noticed so far.  I'll be combing through the site via searches and such, and if past experiences are any indication, should find what I need.  For the sake of conversation, though, I figured I'd post the handful of things I've noticed in the 12 hours since buying my 2010 SLE CCSB.     Indicator lights: Airbag and TPMS.  The tire pressures aren't reading for any of the wheels, so I'm pretty certain the sensors were either removed, are damaged, or are otherwise inoperable.  I used to mount and balance tires 25 years ago but am pretty much ignorant when it comes to TPMS.  My 2006 didn't have the sensors and this might be the fourth vehicle I've owned that does.     Radio: Rear speakers aren't working.  I removed the driver's side rear door panel and checked the speaker and wiring.  I also removed the sill and b-pillar covers to check the wiring.  A few minutes of Google Fu showed that this is potentially a head unit issue.    Switches: Power mirrors don't turn left/right.  I ordered replacement driver's door switches that should arrive tomorrow.  The windows and locks work but it was only about $20 for all of them.  The driver's side rear window switch lets the window down but won't put it back up.  I think the passenger rear doesn't work at all.  In the coming days/weeks, I'll break out my multimeter to check all of that.   Unknown wiring harness: There's a box attached to the front driver's side of the engine compartment, right where the second battery shelf is located.  There are three plugs, one of which looks like it fits a standard headlight-style bulb (9007 or similar).  It doesn't look like it's plugged into anything.  I'll do some digging and if I don't see anything elsewhere on the site, post some pictures here.   Unknown plugs on brake booster: There are at least two female plugs on the brake booster that aren't being used.  I think it might be a replacement/aftermarket, so maybe those are used for a different application, as there don't seem to be any unplugged harnesses and no indicator lights are on.   Little squeaks when turning: Sounds almost like a bushing around the bed of the truck.  I'll have to pay close attention as I get more familiar with the truck.   Clunk on acceleration: possibly the infamous drivetrain clunk.  My 2006 had it and I'm just not familiar enough with this truck yet to fully grasp what it is.   Anyway, my apologies for the vague and all over the place post.  This truck is new to me, and it's been four years since I drove my 2006.  With 200k miles, I know I'll need to learn this truck quickly to avoid having any major issues, despite being confident it's got much more life to it.  My 2006 had nearly 320k on it when I parked it (nearly 300k of which I put on the truck), and it was still drivable then, though I suspected the head gasket might have blown.  I'd hoped to have that truck back by now, but it's gone forever, as I detailed in my reintroduction thread.  
    • lowrider
      Range RA007 DFM Module

      By lowrider · Posted

      I always drive in Sport mode. With more driving, I am finding the initial response when accelerating is much quicker now🖕 Lou
    • Tyler Gibbs
      2022 2500HD with a new RSI SmartCap

      By Tyler Gibbs · Posted

      Is it an optical illusion in the pic or is the truck really squatting that much horribly?

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...