Jump to content

Recommended Posts

Posted

The way silver spaceship described the vibration on his truck is exactly the same way my truck is behaving down to the tee almost sounds like he is describing my truck. And he is right it dose not always vibrant something triggers it, and I know it's the truck because I have tried the same stretch of road with my wifes Tahoe at the same speed and it doesn't vibrate. By the way I have had up to 4 people lots of times with me in the truck and sill dose the same thing. At first I thought it was just me but after reading silver space ship comments and describe exactly what I was going through, now im not crazy lol. What dose it take to get this truck switched out for another one dose anyone know? Or am I SOL on this one? Y do I have to pay 50k for something that is give me headache what can I do about this?

  • Like 1
Posted

It's possible that the weight has nothing to do with it I just thought to my self on the way home what changed and that's the only thing. It might ride just fine tomorrow, it's unpredictable. One thing is for sure after having a engeneer test drive it and say its normal the dealer isn't going to do anything about it and I can't blame them. Plus the one I test drove did it too, I would say not quite as bad but very close at times.

Posted (edited)

I too have this problem on my 2014 silverado w/5.3 4x4 z71. Wicked vibration while towing an aluminum open trailer with two atvs. None under normal conditions nor when hauling a 4000 lbs camper. Trailer doesn't vibrate behind other trucks. During lunch I happened to sit next to two service technicians. They said their is a known prop shaft alignment problem with no know fix that they were aware of. If I am thinking about this correctly a light load squats the truck just enough to create the problem. But a heavy load makes it hard to notice. I love the truck but sledding season is on its way, got to get this fixed soon.

 

Oh that trailer is about 500 lbs plus another 1000lbs of atvs. Creating about 200 lbs of tongue weight. Vibration gets real bad at 55mph.

Edited by Szyikowski
  • Like 2
Posted (edited)

I have this very same issue on my 2014 Sierra 2WD. I may have a solution (theory) to why it seems to go away sometimes and return other times. I have noticed that on my truck the vibration will get better or worse as I am turning at highway speeds starting at about 65 mph and continuing upwards of 80 mph. I noticed the vibration one weekend on a trip and got the tires balanced the following weekend. The problem seem to be actually worse than it was when I took it in, so I started to really pay attention to it. I started noticing that it would be better occasionally and then worse. I hit a really long bend in the road and that is when I experienced the reason, at least on my truck, why it seems to be better/worse. I felt the vibration cycle from almost gone to really bad and then back to almost gone. It appears that there is a balance issue between the right and left wheels. As they turn at different speeds while turning, they are able to align with each other producing more vibration or offset from each other canceling out the vibration. It never totally goes away on my truck, though. I haven't taken my truck into the dealer yet but I plan on taking it in next week to see if they can check some things out.

 

On the weight subject, I almost daily haul around 4 other guys during lunch and still have the vibration though the speed in town is only 65 mph so I can't say if it is worse or better with the weight since it is only starting to vibrate at that speed.

 

Edit: I forgot to add that I have since had my tires balanced twice with no change to the vibration.

Edited by thehad
Posted

I had a '12 Grand Cherokee, that did the same thing. It drove me nuts. The dealer said that it was supposed to be that way. I think they just couldnt figure it out. I got tired of fighting with them so I traded in on my '14 silverado.

 

I have the LTZ and the ride is super soft, rides like a 80's caddy

Posted

So after not hearing anything from my local dealer for 9 days i decided to call and see what's the status on my truck. The rep told me that a Chevrolet engineer came down to check the truck. The engineer said it was the drive shaft and order a new and improved drive shaft and gets installed next Thursday, this will be the third drive shaft they put on. The engineer said he was going to put it on and test drive it him self so let's see how that goes.

Posted

So after not hearing anything from my local dealer for 9 days i decided to call and see what's the status on my truck. The rep told me that a Chevrolet engineer came down to check the truck. The engineer said it was the drive shaft and order a new and improved drive shaft and gets installed next Thursday, this will be the third drive shaft they put on. The engineer said he was going to put it on and test drive it him self so let's see how that goes.

Hello,

 

I am happy to hear that the dealership is resolving your vehicle issue. Please keep us inform if you are satisfied with the repair.

 

Safe travels,

 

Jennifer T.

GM Customer Care

Posted

I just had my tires rotated today and the vibration is still in the rear of the truck. The only thing that I can think that it is now is the axle. I will be taking the truck into the dealer next week to have it looked at. I will keep you all posted on what they come up with and if it helped or not.

  • Like 1
Posted

Well, the dealer replaced the driveshaft Friday. Didn't do anything to help the problem. Maybe the 2014 Chevy's are supposed to vibrate.

Posted

I haven't experienced any vibration, certainly hope they figure it out!!!

 

Mike

Posted

And now it's on the back of a wrecker headed back to the dealer. Surging won't get over 30 mph. This has been one hell of a new vehicle experience.

Posted

Just curious, those who have the vibration what wheels do you have? I drove one with 20's and it felt different than the one I bought with the 18's.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Common Sense Assembly   Your driveline is forgiving of the occasional mistake. It will even often forgive the random serious blunder. But it will not forgive a continuous bad habit.      What? Not everything needs to be a five thousand word essay.       
    • We drove about 15 minute east today to visit a friend and saw a steep increase in price in the same county. About 50 cents a gallon steepper. 
    • Sure about that? A degree wheel and a dial indicator would lower your degree of assurance in that statement. 😉    It why we have offset keys and dialable timing sprockets. Just say'n.... I've built a few and have never seen one "On the money". 
    • I will admit I haven't experimented much with pressure drops beyond the numbers I put in and part of that is that the numbers I used are fairly low and then found out it would trigger regardless at that 35 psi. Having said that I had tried before had changed the placard pressures and being that I have a 1 ton set to 80 on the placard for the rear I believe it triggered close to 60, the front I don't recall now for sure but thought maybe it could get close to 45 from that factory 60 placard pressure. So I never did figure out if it was a number of psi from placard pressure to the alarm or a percentage of the total placard number as some figured it was like a 25% drop from placard pressure would trigger it. So as to try and answer your question, I believe I set the placard pressure on the front to 47 or so and while I run the front tires at 40, they have dipped below that some if its colder and I haven't put "winter air" in yet and never once have had the front alarm go off. I would say that the answer your looking for is no, that if you set your placard pressure to 45, you have a certain amount of room to drop below that pressure before the alarm will go off.    The pressures you decide to run in your truck, that ends up being what makes sense to you based on what your carrying in your truck or if towing, then have to bump them back up to something that will carry the load in the rear and the fronts typically left at the same pressure. It all comes down to that chart I put the link to and using an accurate roadside scale to be your guide, both unloaded and then loaded to know your minimum safe pressures.    I just wish GM would allow a person to change the readings for the tire pressures to the English system of pounds as I have to look at that goofy metric reading that will never ever jive in my head and will go over and change it just to figure out what they are if need be and then change it back. 
    • That part I understand, that the dealer can do it. But I'm not understanding why updates that were available to the truck since it left the factory, or the dealership originally, would not still be available to it without dealer intervention.   I'm thinking along the lines of recalls. They stay available until they are completed, regardless of whether they are in warranty or not, or in the hands of the original owner or not. Why not updates as well, especially since some of those can be safety related also?
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...