Jump to content

Recommended Posts

Posted

Everyone should take videos of their vibration issues and post them on YouTube.

 

 

 

Tapatalk via Moto X

Posted

So I dropped my truck off last night at the dealership. The service manager calls me and leaves a voicemail at 7:30 tonight and says the GM Engineer had been working on it all day and it is fixed. Im not very optimistic but I'll report back tomorrow.

This should be interesting.

Posted (edited)

Please this sounds like the most pratical fix to date, and we do have 1 confirmed fix with the c clamps to driveshaft as of yet.

We should be demanding our dealership to have our driveshafts balanced independently first, before any other action!!!!!!

This will prove that the driveshaft is indeed out of spec right from the factory, and any replacing of the driveshafts through warranty must be confirmed by factory tested and confirmed parts.

 

Machine welded driveshafts, means thousands of out of spec driveshafts, and absolutely no qualified quality control being done at the manufacturing level.

This my friend is what upsets me the most! A good truck, with cheap parts, and untrained associates, and a failed quality control system will destroy GM's legacy wait and see.

I hope some big wig at GM is reading this and wakes up with swift changes!

 

I got a quote from a local driveline shop for $60 to balance the shaft if I bring it to them, or $100 if they have to pull it themselves. So its a cheap fix if this winds up solving it, instead of letting GM throw new driveshafts at the truck when the new ones in fact could be out of balance as well.

 

The hose clamp method is BS and especially for GM to recommend that. It is just going to mitigate the problem, not solve it. They just put the truck on a lift, run it up to the speed of the vibration and see if its better and then tap the hose clamp around and keep trying until the vibration seems better. It needs to be put on a balancer and given the exact amount of weight required to balance it out, rather than whatever the weight is of one or two hose clamps. One could not be enough, and 2 might be too much, have to have a balancer do the job and get the perfect amount.

 

I believe 20Bowtie14 said he was going to go to a driveline shop. Hopefully this is the fix and we can all move on. I would volunteer my truck but I've already been through this once as my last truck was in the shop for 54 days in a total of 5 mos, and I don't want my new truck to be a frankenstein truck like the last one until I know what exactly needs to be fixed instead of throwing parts at it.

Edited by hotrodz37
Posted (edited)

Got my popcorn out. waiting to hear Boughtalemon's outcome.

 

I am betting he gets the same results as mine. Two clamps and a phone call from GM telling him they are closing the case because his truck is now in spec.

 

Of course there is the off chance his problem is something else. Something that may take baling wire and duct tape to fix.

 

 

Side Note: I called the professional balance shops in town. It is less than $100 to balance the shaft. I may take mine over and just have them check the shaft with the so called fix GM put on.

Edited by HDNitehawk
Posted

3.08 on mine and smooooth.

3.08 on mine and not so smooooooth!

 

Multi-part post here:

 

Number one, thinking about contacting GM and suggesting they tweak the Chevy slogan to 'The irregular heartbeat of America.'

 

Secondly: been following this every day, but haven't posted up to now because I thought my vibe was on the minimal end of the spectrum. (And I'm not letting them tinker with it. I'll wait until they release the fix.) I only have about 1,800 miles on it--but now I think it's getting worse and more (if that's possible?) random. Used to be very subtle at 61-70 mph. Today I thought I could really feel it in the steering wheel for awhile; then it disappeared again (so I'll have to pay closer attention in the near future, I guess.)

 

Third, no offense (and I know it's difficult once you get mesmerized), but if you have not purchased a truck--I don't know how you could read all these posts and still consider it. If nothing else, be patient and wait for the '15s! My original plan was to run my old truck into the ground and then maybe getting something like a '65 El Camino and pimping it out. Wish I would have! Would've been so money ahead!

 

Fourth, what are others getting for mileage? I'm not impressed with mine. Computer displaying average over the last 400 miles says slightly less than 15. This is with about half local and half highway miles; taking a 200 mile road trip today--so I'll see if it goes up.

 

Good Luck!

3.08 on mine and smooooth.

3.08 on mine and not so smooooooth!

 

Multi-part post here:

 

Number one, thinking about contacting GM and suggesting they tweak the Chevy slogan to 'The irregular heartbeat of America.'

 

Secondly: been following this every day, but haven't posted up to now because I thought my vibe was on the minimal end of the spectrum. (And I'm not letting them tinker with it. I'll wait until they release the fix.) I only have about 1,800 miles on it--but now I think it's getting worse and more (if that's possible?) random. Used to be very subtle at 61-70 mph. Today I thought I could really feel it in the steering wheel for awhile; then it disappeared again (so I'll have to pay closer attention in the near future, I guess.)

 

Third, no offense (and I know it's difficult once you get mesmerized), but if you have not purchased a truck--I don't know how you could read all these posts and still consider it. If nothing else, be patient and wait for the '15s! My original plan was to run my old truck into the ground and then maybe getting something like a '65 El Camino and pimping it out. Wish I would have! Would've been so money ahead!

 

Fourth, what are others getting for mileage? I'm not impressed with mine. Computer displaying average over the last 400 miles says slightly less than 15. This is with about half local and half highway miles; taking a 200 mile road trip today--so I'll see if it goes up.

 

Good Luck!

Posted

It'll be next week sometime, but I've already called my drive line shop to balance the drive shaft. After the driveshaft was changed in my first 14, the vibration did get better but was the same frequency. I really hope a good balancing is all we need..

Posted (edited)

 

I am betting he gets the same results as mine. Two clamps and a phone call from GM telling him they are closing the case because his truck is now in spec.

 

No, the results may surprise you. He may end up with three or four clamps. :lol:

Edited by pm26
Posted (edited)

Im curious to see what the fix was as well. Just about every part in the driveline of mine has been replaced. It has been 30+ days in the shop so I opened a case with GM Tuesday to get my ducks in a row to fight for a buy back. The same day the GM field engineer told them to lock open the flapper in the exhaust due to it causing vibration in a few other cases.

 

GM contacted the dealership Wednesday about my complaint and the sales manager called me. I told him we were getting into lemon law territory and I was tired of the tinkering on my truck and didnt even want it back at this point. Coincidentally later that day the service manager calls me and says locking the flapper open fixed the issue and they are ordering me a new exhaust system now with a redesigned flapper. Should be in today or tomorrow.

 

I am very skeptical if this fixed it or now they feel a sense of urgency to get my truck out of there before they are forced to buy it back.

Edited by Aboothlsu
Posted

Im curious to see what the fix was as well. Just about every part in the driveline of mine has been replaced. It has been 30+ days in the shop so I opened a case with GM Tuesday to get my ducks in a row to fight for a buy back. The same day the GM field engineer told them to lock open the flapper in the exhaust due to it causing vibration in a few other cases.

 

GM contacted the dealership Wednesday about my complaint and the sales manager called me. I told him we were getting into lemon law territory and I was tired of the tinkering on my truck and didnt even want it back at this point. Coincidentally later that day the service manager calls me and says locking the flapper open fixed the issue and they are ordering me a new exhaust system now with a redesigned flapper. Should be in today or tomorrow.

 

I am very skeptical if this fixed it or now they feel a sense of urgency to get my truck out of there before they are forced to buy it back.

Personally I think its definitely a driveline issue and its too much vibration 70+ to be a little flapper... Good luck though! If this solves your problem I'll be one of the first around here with an after market exhaust on my truck lol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Its no wonder you've gravitated to the oil types and brands you have in later years after trying certain brands and one being a specialty oil or at least very hard to come by up here and the other would have been a commonly found oil of the era and the vastly different outcomes as a result to using the vehicles in question the same distance for an OCI . It shows what marketing hype can do without actually having the product to back up the claims and that is no different now with the insane claims that are written on the side of a bottle of oil from some of the off the shelf oils.    What has surprised me and I was already finding this out before I bought my truck with the GDI engine, that this newer fancy technology that seemingly would suggest better fuel economy/emissions with this high pressure spray of fuel is not in reality kind at all to the engine or at least the oils life. Yet they insist on claiming long OCI with this technology just like they did with the port or similar type fuel injection systems when in reality its a step back in oil life to have a GDI system.    I think the mistake your making Grumpy is that your not sending your samples to Blackstone and getting the feel good glowing report that you can run it another 1000 or more miles and then send another sample where they say run it yet another 1000 miles and on and on it goes until your sending in something that looks a lot like road tar and then they may suggest you change your oil within the next 1000 miles 😆
    • I am guessing that engines of that design back then had a better ability to be abused and survive longer than a new design engine with the long timing chain and the overhead cams and phasers etc. But I would never guess that an engine could go that far and not fail spectacularly or at least die a slow death. 
    • In the 80's 90's I'd run Honda's 7,500 miles between changes using Red Line HP 5W20 and do it for hundreds of thousands of miles with issues. Back in the day it was an SAE 20 with the HTHS of a SAE 30 and SN add load. It was also very polar. Oxidation VOA was over 120. Besides those motors were SPFI and lean burn tech. I could have likely run it longer but never did.    We had a Toyota bought new I ran on Pennzoil's latest and greatest synthetic of the day with "Penthane". A made up word for a very low dose of PAO. Tried 7,500 mile OCI's in that Group III/VI chemistry and the rings tapped out at 90K. Rocker box wasn't as bad as the one Punch put up but it wasn't good either. Also a SPFI motor.    I'm around 3,750 across the board on these GDI monsters and the oil it tapped out by then usually on TBN/TAN crossover and color. Red Line HP Euro.    The AMSOIL SS brochures tell you to follow the OEM values for the service class but that it can be run up to 25K if monitored. I can't imagine what motor could go that distance and not tap out. I've never owned one.    Yes, I know. Lot's of people do. I'm just not going to be one of them. 
    • I knew a guy in the early 80's that bought a new Monte Carlo and ran it a 100,000 miles without ever changing the filter or the oil. Just kept adding. It looked like that inside.     
    • Good evening. I was lucky enough to get passed down to me a 2007 GMC LBZ that was my great uncle's. While the underside and rockers are more or less gone I feel like with time I can restore it to working order since it only has 110,000 miles and he put nearly every option he could get without getting the new body style since he did not trust DEF. So far I have done everything I can think of but when I put the key into the ignition nothing happens. I put 2 brand new batteries in it. Cleaned the terminals. Check all the fuses and relays and they all pass with my multimeter. I know I'm missing something that I just cant think of. The only odd thing is the OBD2 port works which makes me think its not the mega fuse. Any advice would be greatly appreciated. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...