Jump to content

Recommended Posts

Posted

In conversation with my service advisor, he commented some suspicion from GM regarding the aerodynamics in this new body. But when I asked why double cab, crew cab short and crew cab long have the some problem, no answer.. I know that is different, but I had the vibration with and without tonneau cover.

 

Yeah, I still have a vibe with my tonneau cover on as well.

Posted

I don't have a shake or vibration issue (that i don't know off)but yesterday after making a trip to Houston I noticed that when I am accelerating at 85 or more I hear what appears a humming noise coming from the front of the truck. Anybody else is having this issue?

Posted

I don't have a shake or vibration issue (that i don't know off)but yesterday after making a trip to Houston I noticed that when I am accelerating at 85 or more I hear what appears a humming noise coming from the front of the truck. Anybody else is having this issue?

 

.... create a new thread!

Posted

+1 Retard. Go troll somewhere else

 

You are clueless.

 

Seriously? Go back and check when this vibration thread was started. It's been a significant problem for almost a year now. Moron.

 

Enough with the name calling. Get back on topic.

  • Like 2
Posted

Well, wishfull thinking...it was just the cooler temps and not the tailgfate being down. It was mid 90's when I left my client and the truck was vibrating on the way home with the tail gate down. I still think it had a little bit of an impact, but not a big one at all. Oh well. Back to the drawing board...cuz GM certainly isn't at their's.

Posted

Well, wishfull thinking...it was just the cooler temps and not the tailgfate being down. It was mid 90's when I left my client and the truck was vibrating on the way home with the tail gate down. I still think it had a little bit of an impact, but not a big one at all. Oh well. Back to the drawing board...cuz GM certainly isn't at their's.

The impact it likely had was the drag force created by letting the tailgate down. Basically when it's up a pocket of air forms and travels in a circular motion within the bed allowing air that passes over the front of the truck as you drive to continue to pass over the pocket in the bed. The pocket of air in the bed acts almost like a camper shell. When you let the tailgate down, the pocket of air can't form so air passing over the truck from the front doesn't flow nicely over the bed and instead exerts a downward force on the bed creating drag. This is why letting your tailgate down while driving is worse for fuel economy, not better. Mythbusters did a whole study on this. That downward force or drag likely helped calm the vibration down but was neither the culprit nor the solution for the vibration problem.

Posted

I CANT WIN... I BOUGHT NEW TIRES.. NOT IT. .EVEN THOUGH IT RODE SMOOTH AS GLASS AFTER WORDS FOR A COUPLE DAYS.. REBALANCED..SMOOTH AGAIN FOR A COUPLE DAYS.. INSTALLED DYNA BEADS WITH NO CHANGE... HAS ANYONE REPLACED RIMS AND GOTTEN RID OF THIS PESKY VIBRATION??? IM AT MY WITS END... CAN I AFFORD TO PUT TIRES AND RIMS ON

 

.YES...BUT WHY IN THE CRAP SHOULD WE ALL BE BUYING TIRES AND RIMS, WASTING OUR TIME AND MONEY TRYING TO FIGURE OUT GMs PROBLEMS?... I WILL NOT RECOMMEND THIS TRUCK TO ANYONE AND IM A COUPLE DAYS WORTH OF IRRITATION AWAY FROM GETTING RID OF IT. ..

Posted

I had both factory 18's and 20's. Both sets were equipped with factory Goodyear's. Both had vibrations. Even after multiple road force balances and rotations.

Posted

I to have noticed a shake while slowing to stop,then turning right it still shakes slightly as I pull away.it seems like it goes into v4 as I'm stopping (no v4 light on )which at low rpm might shake worse?and stays until I accelerate.

 

Sierra 2014. V6 double cab

Posted

I CANT WIN... I BOUGHT NEW TIRES.. NOT IT. .EVEN THOUGH IT RODE SMOOTH AS GLASS AFTER WORDS FOR A COUPLE DAYS.. REBALANCED..SMOOTH AGAIN FOR A COUPLE DAYS.. INSTALLED DYNA BEADS WITH NO CHANGE... HAS ANYONE REPLACED RIMS AND GOTTEN RID OF THIS PESKY VIBRATION??? IM AT MY WITS END... CAN I AFFORD TO PUT TIRES AND RIMS ON

 

.YES...BUT WHY IN THE CRAP SHOULD WE ALL BE BUYING TIRES AND RIMS, WASTING OUR TIME AND MONEY TRYING TO FIGURE OUT GMs PROBLEMS?... I WILL NOT RECOMMEND THIS TRUCK TO ANYONE AND IM A COUPLE DAYS WORTH OF IRRITATION AWAY FROM GETTING RID OF IT. ..

 

So if it cured it for a few days and came back, it seems that the tires are slipping on the wheels and throwing it off again (stating the obvious here I know). Wonder if the new wheel design has something to do with it.

 

Does anybody have this issue with aftermarket wheels?

Posted

They rebalanced my factory 20s with the Goodyear ls2's, twice, still shakes. I then put on my aftermarket 20s with toyo open country at2s(rode smooth on my 12 sierra).. Didn't help the shaking that's still there.

Posted

Anyone with non-Z71 (stiffer suspension) has the vibration issue?

I tested some z71 and non-z71 and looks like the non-z71 absorb (hide) the problem better.

Posted

Anyone with non-Z71 (stiffer suspension) has the vibration issue?

I tested some z71 and non-z71 and looks like the non-z71 absorb (hide) the problem better.

I dont doubt that...I have a Z71 and run my tire pressure so they never exceed 33 when warm...today was in the 90's and they expanded out to 34...one was at 35. It helps a it for sure.

Posted

The temps here today were in the low 90's...very bad shaking at highway speed. Has anyone else noticed this? In the am on the way to work it's not too bad....but once it warms up wow...completely unacceptable ride. I'm not kidding here...looking forward to the fall and a better riding truck. Mine seems to really run poorly in this heat...runs poor, seems sluggish, MPG went down a bit, and shakes worse. Whats up with these trucks?

Posted (edited)

Anyone with non-Z71 (stiffer suspension) has the vibration issue?

I tested some z71 and non-z71 and looks like the non-z71 absorb (hide) the problem better.

Yeah lots of people with non Z's having vibration issues if you read back through the entire thread which takes a while to do. Edited by Silverado-Hareek

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • 2026 3500HD.  Mostly empty. Grocery getter. What tire pressure are you running for 37x12.50x20. I have 37x12.50R20 Toyo Open  Country RT pro and been running around 55 lbs front and rear and it's too much. Tires are wearing more in the middle. Toyo says 45 front and 50 rear. Chalk test and it's still too much. I lowered it to 40 front 44 rear see what happens. 
    • Enjoy the new truck, it’s a beauty. I’m glad you’re keeping the OBS, I love those old trucks. 
    • With large equipment or deep mud it is more of a use the higher gear to avoid spinning tires, getting stuck because of spinning tires and doing damage to your machine. The idea is if you run out of torque before you spin tires you can still downshift for more torque. If you are just spinning your tires in the lowest available gear you are stuck and things break.   Automatic transmissions, traction control and electronic transfer cases change the calculation a little as you the driver have less control over each piece. 
    • are there any codes? with lots of rust, perhaps disconnect/clean both sides of the connection/examine cable ends (the wires) for corrosion going into the sheath & replace if necessary/reconnect ALL the power AND ground cables between the battery, engine, frame, cab, fuse box and starter charm.li (website) has a no-start diagnostic procedure you can work through to get it working.
    • Its no wonder you've gravitated to the oil types and brands you have in later years after trying certain brands and one being a specialty oil or at least very hard to come by up here and the other would have been a commonly found oil of the era and the vastly different outcomes as a result to using the vehicles in question the same distance for an OCI . It shows what marketing hype can do without actually having the product to back up the claims and that is no different now with the insane claims that are written on the side of a bottle of oil from some of the off the shelf oils.    What has surprised me and I was already finding this out before I bought my truck with the GDI engine, that this newer fancy technology that seemingly would suggest better fuel economy/emissions with this high pressure spray of fuel is not in reality kind at all to the engine or at least the oils life. Yet they insist on claiming long OCI with this technology just like they did with the port or similar type fuel injection systems when in reality its a step back in oil life to have a GDI system.    I think the mistake your making Grumpy is that your not sending your samples to Blackstone and getting the feel good glowing report that you can run it another 1000 or more miles and then send another sample where they say run it yet another 1000 miles and on and on it goes until your sending in something that looks a lot like road tar and then they may suggest you change your oil within the next 1000 miles 😆
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...