Jump to content

Recommended Posts

Posted

GM is offering me a new 2015 LTZ with 500 miles to replace my vibrating 2014 LT with 8000. My payment will stay the same.

 

Also, the new one does not have a bad vibration at this time. Should I agree to the trade?

 

GM made the same offer to me and I took it. I had over 14,000 miles on my 2014 and they could not fix the vibration. I had multiple tires, road force balances, new drive shaft replacement, and "tweaks" to my ring gear by a field service engineer (FSE) and none of it fixed the vibration. I had 5 trips to the dealer and a total of 25 days out of service before I filed a defect notice (lemon law) with the state of Florida and GM. GM didn't even attempt the final repair because they already knew they couldn't fix my truck. Since GM didn't want to have a lemon on the title they offered me full MSRP trade value on my 2014 plus additional money to cover the dealer fee, window tint, bed liner, title fees, and license plate fees. Initially they tried to get me to pay $4500 for "usage" based on the miles I had driven. I told them that $4500 was unacceptable based on all the trouble they put me through and that I was refusing their offer and pressing on with the lemon law process. They then waived the usage fee if I would agree to "trade assist" in lieu of the lemon law. I had to pay $300 out of pocket because the 2015 MSRP was $800 more (minus $500 for the tint and bedliner). I also got a new loan with another bank at a lower APR because the interest rates were better than when I purchased my 2014. The entire process took over 90 days after I filed the defect notice so you will need to be patient. Good luck! Two weeks after I got my 2015 I noticed my 2014 on their used lot as "certified pre-owned."

  • Like 1
Posted (edited)

GM is offering me a new 2015 LTZ with 500 miles to replace my vibrating 2014 LT with 8000. My payment will stay the same.

 

Also, the new one does not have a bad vibration at this time. Should I agree to the trade?

what do you mean when you say "does not have a bad vibration"? Does it have a vibration or not? Or are they "good vibrations"? Lol

Edited by 14LTZZ71
Posted

Wouldn't 5 thou be .005"?

Posted

It's so sad to see more and more trucks being added to the list :tear:

 

Just think of the people who have not taken the time to search this issue

out, like I did until the service manager stated " Don't believe everything you read

on the internet " I was a member here long before this issue came up on the '14

Silverado. and the best information I received was from this very site !

 

I strongly can not stress how very important it is to have a semi calm attitude with

your dealer, it was his persistence with GM that kept my name on the top of GM's

list and my nice but constant calling GM customer service to make them aware I was

in no way accept anything less then what was fair, my case took a bit longer because

of the items I added, and I gave GM six weeks to produce a truck that did not vibrate

or delay on the up shifts or have excessive injector noise.

 

It was a sad day for me when I finally realized that GM had no interest in keeping

me a GM customer. and I've moved on and I'm glad that I've been able to help

quite a few people with this issue.

 

This vibration issue is snow balling at a very extreme rate, and I see nothing good

coming from it until GM acknowledges their engineering mistake and takes care of

it's customers in the same good faith that people purchased the trucks to begin with.

 

All in all, ' What goes around will come around ' it's just a matter of time !

I was told by my "service manager" and 2 others from GM assistance not to believe what I read online,I replied to all of them by stating..You should be glad there wasn't a internet between 1980 and 1986 because with the crap that GM built back then there wouldn't be a GM today. I know because I was able to make a pretty nice living off of repairing them!

Posted

I have the same problem i took my truck back to the Dealer they lent me another truck for two days, i didn't feel Any issues with this truck. First they change the front tire. After a week the vibration continued can't even tell where was coming from... Steering wheel, tires, gas pedal etc... I called my service advisor again they lent a diferent truck and felt the same issue. After a week i was informed my truck was ready and the procedure was to replace the Four tires. I told my service advisor about the vibration on the loaner he told me the issue was the quality of the tires. Again after a month the vibration is back!!!! Planning to take my truck back soon

Posted

I was told by my "service manager" and 2 others from GM assistance not to believe what I read online,I replied to all of them by stating..You should be glad there wasn't a internet between 1980 and 1986 because with the crap that GM built back then there wouldn't be a GM today. I know because I was able to make a pretty nice living off of repairing them!

Wonder how the service manger and gm assistance would feel if they had spent $50,000 on a new truck. Would they just set back and enjoy the vibrations.

  • Like 1
Posted

Wouldn't 5 thou be .005"?

Yes, "5 thou" is 0.005". While we're talking about it, I will add that you may also hear the term "mil". 1 mil is 1 thousandth of an inch, or 0.001". Don't confuse it with millimetres! A mil is NOT short for millimetre. (Mil is often used for film thickness, such as sheet plastic for example).

Posted (edited)

All in all, ' What goes around will come around ' it's just a matter of time !"

 

Very true statement. In fact, it already happened with GM. The consumer already spoke, and GM was out of business. Except, the government intervened in the evolutionary process of the free market, and propped GM back up. In some ways, I think us consumers would have been better served had the fed let GM go tits up, then all the GM senior management would have been canned, and after the receivers finished a better business would have emerged that likely would "get it". As it went, GM basically learned that no matter how crappy a job they do, no matter how poorly they treat their customers, they will prosper. It's like dealing with a spoiled child...if there are no consequences for their bad behaviour, how will they ever learn to behave properly?

 

And yes, I got the same crap at my dealership about not believing what you read on line. I actually could see fear in their eyes, to tell you the truth. The know the power of the internet, and how it can and will expose them for what they are. They are trying to hold on to their traditional techniques of denial (we've never heard of this problem before), but with owners able to easily and instantaneously connect online, those days are numbered. The more we put every move they make, every word they say, under the microscope and online, they more truthful they will learn to be and more importantly, their behaviour will begin to serve us, instead of the other way around as it is right now.

 

Let me tell you about an encounter with a retired GM regional service manager at a wedding, about 20 years ago. After chatting about cars for an hour or so over dinner, he finally said something like "you know, after years of doing this job, I finally came to the conclusion that there really are no problem cars, just problem customers!" This would have been through the 80's, when GM sent junk out the door. Imagine that was the attitude of senior GM management. Imagine how much of that same attitude lingers on inside the corporate hallways of big blue. Imagine how much of that attitude is woven into every TSB and GM "corporate standard" to this day. Bad habits are hard to break, especially when there are no consequences.

 

After the bailout, I swore I would never buy another GM product as long as I lived. I broke that promise when we bought this Denali, so I own this mistake. I knew better and I will have to live with that. But let's all hope test what goes around does in fact come around a second time!

 

In the meantime, let's keep the fires burning on what's going on with this platform. The more informed every owner is, the better he or she can deal with their vehicle and their dealership.

Edited by Wrench589
  • Like 1
Posted

2014 Rocky ridge vibraton / shaking . Gm saying. That I have to pay for the lift kit to be taken off so they can fix the problem . Rocky ridge saying its Chevys problem. Never by Chevy and or Rocky Ridge . Continuing to follow this complant to the end .

2014 Rocky ridge vibraton / shaking . Gm saying. That I have to pay for the lift kit to be taken off so they can fix the problem . Rocky ridge saying its Chevys problem. Never by Chevy and or Rocky Ridge . Continuing to follow this complant to the end .

Posted

I know I've brought this up before, but do any of you notice any difference in the vibration intensity between 2wd and 4wd auto? On our Denali, there is a distinct difference. In 2wd, there basically is no vibration. In 4wd auto, very noticeable vibration felt in the steering.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • tl; dr I've now reached the 6th floor of hell. I'm chronicling my journey for my morning readers.   Pulling the top of the intake apart was moderately easy but it involved a lot of parts, connections, and minutae. I was preparing for the new fuel lines to arrive ("nut and bolt kit" it's called). The fuel line connections are notched and held in place by the manifold and a metal plate with a T27 screw.   It's on the back of the intake, under the firewall, with little clearance, and two hard metal fuel lines in the way. I was using Franken-tools (weird combinations of 1/4 inch ratchet with/without an extension, with a bit holder for my T27) to get in there. One of my sockets and bits fell off and has yet to emerge on the floor. I lost a second setup and that's when I almost started throwing tools. But that was the point at which I had gotten traction on the Torx head, and it promptly stripped. No more traction.   I started humming "1-877-kars-4-kids" because I was about at that point. You know what? I'm $1500 into this thing and I can make it disappear just as quickly. This isn't fun anymore. I had spent a lot of time already "tidying" around the engine bay: Fixing all the "someone's been here before!" BS. The truck has been exclusively dealer- and shop- serviced and I'm reminded of why I never let other people work on my cars unless absolutely necessary.   Speaking of dealer service. This truck has a 1" stack of records going back to 1995. I put them all in an excel spreadsheet, date/mileage/description.   The CPI spider has been replaced 4 times in 85k miles. The EGR? Another 4. Multiple, multiple O2 sensors. One Cat. 4? Sets of plugs and wires, and I swear half the stack is diagnosis paperwork for "misfire, runs rough, extended crank, dies at stoplights".   GM was producing some proper crap back then. And it was still well within the era of brittle/crappy plastic. (Windows 95 was released the same month this truck was sold new, we HAD the technology!!)   There (was) a plastic shroud around the evaporator core and HVAC fan in the engine bay. I noticed a chunk of it missing so I poked at it some more and it literally shattered. Touched it some more and pieces were crumbling off. Had a good laugh. Clearly whatever plastic garbage they were using had broken down over 30 years and was literally turning to dust. That was a good half hour of using a shop vac to remove the rest of it.   Back to it.   I was going to give up for the evening but then decided I'm already level 10 pissed off at the stripped screw: G* D* it, give me my tools back -- and my JOY. We'll do this the hard way: The whole intake is coming off.   Blazer won Round II. After finally finding and accessing the 12 intake bolts and using a pry bar to unseat it from the heads, it popped loose in an explosion of gunk and grime raining down into open ports. Awesome.   6 times I reminded myself: Be careful of the temperature sender on the front of the intake.   YEAH, I forgot again and snapped it clean off in the removal. Add another $20 to the ever-growing list of new parts this thing is consuming.   The shame is, long before removing the intake, I had changed the oil in prep for Tuesday's momentous fuel line replacement that was going to be the magic fix and I'd have a running Blazer to tool around in this next weekend. The intake removal, including raining gunk, also gushed dirty coolant all over the valley. Of course it did. Welp, there goes another $35.   I now need an intake gasket set, bolt set, coolant temp sensor, another 5 quarts of oil, some RTV. Don't worry, I've already got 3 new jugs of Dexcool and a thermostat waiting. I'll fill it with clean water first to get it running, dump it, and then add the Dex later on in case... well, let's not go there. I'm only tearing this down once, next time the truck is going on Marketplace for FREE.   Oh, and I'm going to need vacuum hose for all the stupid connections placed at the rear of the engine which have since disintegrated. Come on, GM....tell me you don't do that anymore?   Oh, and the ears on the distributor where the cap screws down are both cracked. I mean, why not put a new distributor in it too. You get a distributor, YOU get a distributor, Everyone gets a new distributor!   This truck isn't out of the woods yet...I'm already questioning how much more time I'm willing to sink in.
    • NewDude, thank you for the suggestions!    I did follow up and the dealer indicates he has an open CX case and is working with DPAC (Dealer Parts Assistance Center).   Per the dealer, GM has had a quality spill and is not providing an update for when a replacement engine will be available.
    • That's interesting.   There was a factory wire-hole in the back, top of the rear cab, which had a wire for the third brakelight assembly running through it, as well as several holes (10 of them I believe) for all of the studs coming off of the 3rd brakelight assembly itself.   I sealed all of those holes with RTV/silicone as well.   I found it kind of odd, that none of those holes, were sealed with any kind of sealant by the factory - if there was any there, it wasn't very much.   That said, I've been out in heavy rain and have ran the truck through high-pressure car-washes a few times now and she has been 100% water-tight to this point.   I feel very confident in the repair, we'll see how it holds up.
    • I bought a used 2022 2500hd with 6.6L in February. In March took a 2200 mile trip towing our 6500 lb trailer. Changed the oil day before leaving and when we were arriving at our 1st destination, low oil light came on (roughly 1000 miles) it was 2 qts low. Now it towed like a dream, no issue there, and we did go through the mountains of TN, but still, 2 qts! Luckily I did purchase an extended warranty. Brought it to the dealership in April, oil change and consumption test. Brought it back last week, 1300 miles, no towing, and no oil showing on the dipstick. GM is reccomending a new engine (cheaper than them rebuilding), we'll see if the warranty company comes through. 
    • T3's and Ibuprofen. I do have a cryotherapy unit (ice machine) and a lift chair that will allow me to raise my legs above my heart.  There are topicals that I can use once the wound is fully healed.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...