Jump to content

Recommended Posts

Posted

Hello,

 

My name is Tim Esterdahl and I'm a freelance automotive journalist working on a story for Pickuptrucks.com. Search my name and you will see it is legit. I'm hoping to find someone I can talk to in detail about this issue who recently purchased a new truck. A 2016 would be great, but a 2015 would be OK as well.

 

I realize this is a bit of a "dead horse" on this forum after scanning some other threads and I certainly don't aim to offend anyone. Instead, I'd like to collect some information and run a story educating consumers on this potential issue.

 

If you are interested in sharing your story, please contact me here or at tim @ tecreativeservices.com.

 

I'll also be in the 1962 Chevy threads since I'm currently working on mine. :)

 

-Tim

 

I'm driving a 2014 Sierra and it still is not repaired. I can't even get the company/ dealer to acknowledge there's a problem.

Posted

Good luck to all who call GM. I have a case and been calling 3 days now with only the ability to leave a voicemail. ive left 5 voicemails. 2 return call backs when I'm away from my phone and I immediately call back only to voicemail. The loaner the dealer gave me is a 2015 Silverado 2500 with 4000 miles. Engine sounds like it's ready to blow with the ticking and the vibration is as bad as my 2015 Silverado 1500. When the 2500 shifts gear you hear a cluck from the rear.

Posted (edited)

There are a lot more people with issues than the ones posting in this thread, most people will try to get it fixed a couple times and then just give up. After enough BS from GM they eventually just trade it in. Thats why I see tons of used 14, 15, and now 16 GM trucks on used car lots with less then 10,000 miles on them and thats a DAMN shame. Its not just vibrations that GM doesn't want to fix, its just about everytime you bring your truck to the dealership that they will usually call it "normal" or "could not duplicate". Its just a matter of time before quality issues catch up with GM and start hurting their profits, but unfortunately for customers right now they're sitting fat and happy and don't give a shit!

Edited by 14LTZZ71
  • Like 1
Posted

most states require a minimum of 3, be aware in some states, if you take a loaner vehicle it doesn't count as an attempt. once you hit the max required, you have to send a final repair attempt notice to GM, they will then set up for an "engineer" to come look at your truck, do something, then claim its fixed but in all likelihood it won't be. so you then have to work with your dealer or an attorney about doing a buyback or repurchase

That is not correct about taking a loaner, at least not in NJ....I took a loaner for over 2 months during my 3 attempts and GM bought back my 14 AT and I got a new 16 AT
Posted

There are a lot more people with issues than the ones posting in this thread, most people will try to get it fixed a couple times and then just give up. After enough BS from GM they eventually just trade it in. Thats why I see tons of used 14, 15, and now 16 GM trucks on used car lots with less then 10,000 miles on them and thats a DAMN shame. Its not just vibrations that GM doesn't want to fix, its just about everytime you bring your truck to the dealership that they will usually call it "normal" or "could not duplicate". Its just a matter of time before quality issues catch up with GM and start hurting their profits, but unfortunately for customers right now they're sitting fat and happy and don't give a shit!

So true. Gm pumps these shit boxes out, then offers 8 grand off msrp on brand new trucks making private party resale and trade in values super low and if you're one of the unfortunate people with the vibration that GM refuses to fix because it's within their arbitrary BS spec you're basically stuck making payments on a vehicle that's depreciating faster than you're paying it off, that you hate driving because it rides like ass. This will be the last GM product I purchase and I have many more trucks to buy in my lifetime. So **ck you GM.

  • Like 1
Posted

That is not correct about taking a loaner, at least not in NJ....I took a loaner for over 2 months during my 3 attempts and GM bought back my 14 AT and I got a new 16 AT

please note, I said some states don't allow the attempt to count if your take a loaner, not all. GM handles buybacks differently for everyone, Going the lemon law route, you have to send them notice, then allow them one final repair attempt

Posted

please note, I said some states don't allow the attempt to count if your take a loaner, not all. GM handles buybacks differently for everyone, Going the lemon law route, you have to send them notice, then allow them one final repair attempt

You sure did...sorry....
Posted

That is not correct about taking a loaner, at least not in NJ....I took a loaner for over 2 months during my 3 attempts and GM bought back my 14 AT and I got a new 16 AT

 

 

How did this work? Did they buy back for MSRP plus the payments you have already made? Then, did you turn around and use that money to purchase the new truck? Were you out any money (i.e. difference in MSRP, sales tax again, etc?)

Posted (edited)

So true. Gm pumps these shit boxes out, then offers 8 grand off msrp on brand new trucks making private party resale and trade in values super low and if you're one of the unfortunate people with the vibration that GM refuses to fix because it's within their arbitrary BS spec you're basically stuck making payments on a vehicle that's depreciating faster than you're paying it off, that you hate driving because it rides like ass. This will be the last GM product I purchase and I have many more trucks to buy in my lifetime. So **ck you GM.

This will make your day......GM just posted the biggest quarter profit ever....

Edited by Garykk
Posted

This will make your day......GM just posted the biggest quarter profit ever....

 

Even worse is they gave Bara a 72% raise to the tune of 28 million dollars for the 2015 year.

 

Lower quality non american part content and Mexicans doing the assembly is doing wonders for the portfolios of GM executives..

Posted (edited)

So true. Gm pumps these shit boxes out, then offers 8 grand off msrp on brand new trucks making private party resale and trade in values super low and if you're one of the unfortunate people with the vibration that GM refuses to fix because it's within their arbitrary BS spec you're basically stuck making payments on a vehicle that's depreciating faster than you're paying it off, that you hate driving because it rides like ass. This will be the last GM product I purchase and I have many more trucks to buy in my lifetime. So **ck you GM.

They take $8k off the MSRP after having increased that MSRP by at least $ 10k over similarly equipped 2013 models. And people fall for it thinking they are getting a good deal. What a bunch of crap.

Edited by pm26
  • Like 1
Posted

Well, I called GM today, Told them that I had picked up my truck from its 5th repair attempt yesterday, and it still isn't fixed. I decided to start off playing nice, so instead of going into it angry and demanding they buy it back or I'll sue them, I simply asked what can be done, because it's to the point that I hate this truck, and don't want it anymore. They were courteous and appeared to understand (likely acting, as taking calls from pissed off people is their job), anyway, they initial representative transferred me to their "Senior Advisers" who asked me more questions, They are reaching out to the DM and the Manager of After Sales (or whatever the hell it is) at my new servicing GMC dealer, even though I have a Chevy (I did straight tell them, I will never go back to Best Chevrolet because of their service department, so they allowed it to be set up with the GMC dealer). they want 48 business hours to reach out and hear back from these people, and I will be contacted with what decided to do. If at this point, they aren't willing give me any options that are acceptable, I will file suit.

  • Like 1
Posted

If at this point, they aren't willing give me any options that are acceptable, I will file suit.

Pull the trigger and quit letting these folks drive the train, you just have one of those trucks that can't be fixed. You'll take a financial hit, but quit wasting your time, get something that works.

  • Like 1
Posted

I just got a letter from a Lemon Law attorney wanting to know if I've had any issues with my 2014 SIlverado LOL

 

www.LemonJustice.com

  • Like 1
Posted

Well, I called GM today, Told them that I had picked up my truck from its 5th repair attempt yesterday, and it still isn't fixed. I decided to start off playing nice, so instead of going into it angry and demanding they buy it back or I'll sue them, I simply asked what can be done, because it's to the point that I hate this truck, and don't want it anymore. They were courteous and appeared to understand (likely acting, as taking calls from pissed off people is their job), anyway, they initial representative transferred me to their "Senior Advisers" who asked me more questions, They are reaching out to the DM and the Manager of After Sales (or whatever the hell it is) at my new servicing GMC dealer, even though I have a Chevy (I did straight tell them, I will never go back to Best Chevrolet because of their service department, so they allowed it to be set up with the GMC dealer). they want 48 business hours to reach out and hear back from these people, and I will be contacted with what decided to do. If at this point, they aren't willing give me any options that are acceptable, I will file suit.

It's the DMA (District Manager After-Sales). They are the local decision makers on buy backs and trade assistance, they are given a budget to pacify aggravated customers in their district. Sometimes they offer buy back and other times they offer trade assistance. If they offer trade assistance it is used to help offset the depreciation of your vehicle towards another GM vehicle. The average customer doesn't get to talk directly to the DMA, normally the dealership Service Manager communicates directly with the DMA and relays the info to the customer. If the DMA offers you a deal and you accept then a GM corporate repurchase coordinator will contact you directly and provide assistance through the entire process. Good luck!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Diesel $5.42 at the truck stop on the hi-way
    • I'm not sure if this should be a new topic, let me know if it's out of place. This my first post. Thanks 85077522 - AC Delco GM Genuine Parts Brake Master Cylinders. Anyone else had to replace this brake master cylinder yet. I didn't do any brake work, it looks like new parts and I've had the truck for about 4k miles, 119k total miles.  When it started to throw codes I did the calibrations with a bidirectional scanner and got the codes to clear but they came back so I did the routine; base bleed, automated bleed and final base bleed. All that with Bosch ES16-32N fluid (please look it up). That seemed to fix it but 100ish miles later it failed again so I ran the same process but with a pressure bleeder this time and got the same results, fixed for 100ish miles. The original fluid looked bad and I thought I got most of it out, it could've been the wrong fluid. The codes; P25A2, C05B0-00, C2A1B. I can get them to clear but not for long. The C05B0 indicates a leak in the front circuit (which is bone dry) so I'm thinking of doing the bleed process on that front again today and I don't know if that's taboo to just do the front but at this point it seems like it's worth the try anyway. The new master cylinder/module unit is supposed to get here today. But now I'm pretty much convinced this install is over my head. I've called several shops and some mobile guys that I know but this thing is like radio active material, scary wise. I did get 2 local shops say they should be able to do it, one says he has the SPS2 programing capability. And with the battery disconnected is there supposed to be pedal resistance, mine is to the floor, then if I pump it I can get some resistance. I had a panic stop prior to this issue which may have contributed from what I read. And on the first attempt to bleed and hydraulic test the scanner listed things to look for and one was any gaps between the pad and rotors which I did notice on the RF corner and I removed the outer pad (where the gap was) cleaned it and the hardware and didn't see a gap after that but will re-check it. I read that if pushing the caliper pistons back then you're supposed to open the bleeder so as to not push fluid backwards into the abs module or it will damage it. If that's true then that's also a possibility from the previous owner having the brakes changed before I got it. I'm using an XTool ip500 scanner. Any suggestions, questions and comments welcome. 
    • Next Friday will be my 6 week point from my right knee replacement.  The surgeon says it will be fine if I choose to drive after this checkup.  I know I could drive now but best to do as my surgeon (and my wife) tell me.  Richard compared being 62 to 72.  I remember when I was in my early 60's I was experiencing slow but regular decline in my mobility.  Thanks to good medical support,  i continued to fight the speed and spread of this decline. During my 60's I worked on non-surgical methods and just when I turned 70, my orthopedic surgeon recommended joint replacements.  In a little over a year, I had one shoulder and both knees replaced.  This hasn't been a terribly fun experience, but worth the discomfort as my future mobility health trajectory has reversed.  It is a treat to now be watching my mobility. balance and confidence steadily improve!
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...