Jump to content

Recommended Posts

Posted

Been about 19 months now since I joined the forum and bought my truck. Been quite a few months since I've been on this topic. 585 pages now. wow. I have 44k on my '14 and it vibes at 77+. Usually only if it's hot or in the sun. At night and early morning's it's much better. My truck took a while to start, but it does. 30k it started. Thankfully mine is not "bad" like some i've seen on youtube. Guess I'm lucky in that regard. Figured I'd check in and see if there is a true solution yet. Guess not.

  • Like 1
Posted

It's so frustrating , I find the 2016 GMC Sierra Denali a beautiful truck and would love to buy one. But due to the vibration problems, I'm scared to make that decision. It must shipped to Europe, so I don't have any warranty from GMC, only from the dealer.

Posted

Snide comment aside, your comment actually proves a point I've tried to make all along. Everyone feels vibration to a different extent. One person may feel a small vibration and consider it uncomfortable while another will not feel a much larger amplitude vibration. You're Harley example is 100% proof of that....typical Harley owners obviously don't find that amount of vibration bothersome, yet many folks would find it quite objectionable. (I wonder what the Picoscope would measure on your favourite hard-tail!)

That said, most owners of these new generation GM brand pickups previously had GM brand pickups, and most almost immediately noticed an elevated vibration that was not present in their previous truck, and was bothersome. That's what brought them to this website. I truly believe most people on this thread did not sit down one day and go "gee, I wonder if I can go find an issue with my truck on the Internet and tie up dozens or hundreds of hours on it". Sure, there are always a few bored ramble-rousers with nothing better to do than stir things up. But I believe most folks on here simply want a vehicle that's at least as smooth as the one they traded in or sold!

Posted

Why hello Wench, how ya been? Thought you were going to buy go a Ram and move on! Don't tell you went and bought "another GM"? NO! Tell me it ain't so! Just can't let this forum go can you? Haha!

 

At any rate, glad I could help you explain what you were unable to after how many hundred posts? Well, let us know what you're driving now, vibration free no doubt, lol :)

Posted (edited)

I'm in the process of finding a local shop that has a on-vehicle driveshaft balance machine. That might help balance out even the pinion or diff a bit. I measured my drive line angles a few months ago and still to this day believe they are wrong. I work a crap ton of hours and when I called the dealers and they said GM does not make shims for the rear leafs.... I kind of put that issue on the back burner and went on to my catch can and 45k drive line fluid changes. I will be re-visiting the drive line angles. I've custom built axle swapped trucks and my rock crawler ran smoother on the HWY than my '14 silverado. I think this whole vibration issue is a cumulative issue. Stiffer frames, stiffer suspension etc. Then you throw in not very tight tolerance on QC for the parts (IE driveshafts, R&P's etc) and you have a vibration. I plan on doing two things. 1- make sure the driveshaft is balanced and my own eyes witnesses it. 2- correct the drive line angles. And when I'm due for new tires at 75k, I will as always personally witness the Hunter 9700 RF Balance. Beyond those items it will become too time consuming to chase.... and mine is not that bad. Just slightly annoying.

Edited by FL335i
Posted

If you ride around all day, every day, at 80 mph constantly looking for a vibration maybe. Do these trucks vibrate at all speeds, from 1 to 77 mph? Or just 78-79-80 mph?

My engine is rough, so that alone adds to the vibration in mine. I have tried a few different brands of fuel system cleaner, and this past weekend even added a double dose to my tank before traveling 400 miles on the mass pike & NY thruway and back another 400 miles on those same roads. None of that has helped the rough engine. In addition i have excess vibration at multiple speeds, yes the worst is around 76-80 mph, but I have a critical points at 46, 56, and 67 mph. why? I have no idea. I took a new video of the water bottle test while on this trip to show the vibration after GM has now claimed my truck is now fixed.... well you wouldn't be able to tell the difference. In addition, I tested the water bottle on transmission tunnel, and it was perfectly smooth, so based upon previous comments my vibration is from the rear of the truck.

 

Mine vibrates randomly in the 30s then stops and picks back up around 70-85 ish. Damndest thing. Heck sometimes on long nonstop trips it will vibrate at 80, then go away midtrip but return before i ever stop but still going 80 ( we have toll roads with 80-85 mph limits here).

 

 

Sent from my iPhone using Tapatalk

I havn't noticed it going away, but I have noticed that it gets worse when going around curves or on inclines.

 

Snide comment aside, your comment actually proves a point I've tried to make all along. Everyone feels vibration to a different extent. One person may feel a small vibration and consider it uncomfortable while another will not feel a much larger amplitude vibration. You're Harley example is 100% proof of that....typical Harley owners obviously don't find that amount of vibration bothersome, yet many folks would find it quite objectionable. (I wonder what the Picoscope would measure on your favourite hard-tail!)

 

That said, most owners of these new generation GM brand pickups previously had GM brand pickups, and most almost immediately noticed an elevated vibration that was not present in their previous truck, and was bothersome. That's what brought them to this website. I truly believe most people on this thread did not sit down one day and go "gee, I wonder if I can go find an issue with my truck on the Internet and tie up dozens or hundreds of hours on it". Sure, there are always a few bored ramble-rousers with nothing better to do than stir things up. But I believe most folks on here simply want a vehicle that's at least as smooth as the one they traded in or sold!

yes, couldnt have said it better myself.

 

This is me. Id love to not have to jack with this headache. My '12 GMC i traded in had no issues. I miss that truck

 

 

Sent from my iPad using Tapatalk

It's fun isn't it? lol

  • Like 1
Posted

Drove a friend's 2016 F150 recently, reminded me of the ride in my 2012 Sierra. My 2014 Sierra can't compete for ride quality. When I traded in I had no idea that the Sierra redesign was going to leave me wanting my old truck back. I think GM screwed the pooch when they updated the Sierra.

  • Like 1
Posted

My engine is rough, so that alone adds to the vibration in mine. I have tried a few different brands of fuel system cleaner, and this past weekend even added a double dose to my tank before traveling 400 miles on the mass pike & NY thruway and back another 400 miles on those same roads. None of that has helped the rough engine. In addition i have excess vibration at multiple speeds, yes the worst is around 76-80 mph, but I have a critical points at 46, 56, and 67 mph. why? I have no idea. I took a new video of the water bottle test while on this trip to show the vibration after GM has now claimed my truck is now fixed.... well you wouldn't be able to tell the difference. In addition, I tested the water bottle on transmission tunnel, and it was perfectly smooth, so based upon previous comments my vibration is from the rear of the truck.

FYI all the fuel system cleaner in the gas tank will not clean the intake valves or throttle body on a direct injection engine. If your rough running engine is due to dirty intake valves or throttle body, those need to be cleaned manually. The TB can be removed easy and thoroughly cleaned with TB cleaner. You can then wipe out the inside of the intake. Then once you have the TB reinstalled you can use a good deep cleaner into the intake tract to clean the intake valves. I like Seafoam spray every 10000 miles or so. And in my opinion, a catch can system should be standard on all direct injection engines.

Posted

Snide comment aside, your comment actually proves a point I've tried to make all along. Everyone feels vibration to a different extent. One person may feel a small vibration and consider it uncomfortable while another will not feel a much larger amplitude vibration. You're Harley example is 100% proof of that....typical Harley owners obviously don't find that amount of vibration bothersome, yet many folks would find it quite objectionable. (I wonder what the Picoscope would measure on your favourite hard-tail!)

 

That said, most owners of these new generation GM brand pickups previously had GM brand pickups, and most almost immediately noticed an elevated vibration that was not present in their previous truck, and was bothersome. That's what brought them to this website. I truly believe most people on this thread did not sit down one day and go "gee, I wonder if I can go find an issue with my truck on the Internet and tie up dozens or hundreds of hours on it". Sure, there are always a few bored ramble-rousers with nothing better to do than stir things up. But I believe most folks on here simply want a vehicle that's at least as smooth as the one they traded in or sold!

 

 

Totally. My 2011 Silverado was flawless. I did NOTHING to it. Worst thing I ever did was trade it in for the 2014

Posted

FYI all the fuel system cleaner in the gas tank will not clean the intake valves or throttle body on a direct injection engine. If your rough running engine is due to dirty intake valves or throttle body, those need to be cleaned manually. The TB can be removed easy and thoroughly cleaned with TB cleaner. You can then wipe out the inside of the intake. Then once you have the TB reinstalled you can use a good deep cleaner into the intake tract to clean the intake valves. I like Seafoam spray every 10000 miles or so. And in my opinion, a catch can system should be standard on all direct injection engines.

Yea, I've seen a number of people say that, however I have seen a few people say that the system cleaners had helped some, so I just wanted to give it a shot.

Posted

My '14 Sierra Z71 5.3 with factory 20" wheels also developed the dreaded 72 mph shake at around 17,500 miles. Bought some new tires, didn't completely cure it but improved at first, then, slowly got worse and worse up to 24,000 miles... Had my tires rotated, re-mounted and road-force balanced to .000, thinking that would surely do the trick. No dice. After reading so many articles and posts about the issue online, I solved my problem. Deciding I wasn't going to embark on a mission of back-and-forth to the dealer to try and have them diagnose and cure an obvious systemic design flaw, I traded in the "Black Bueaty" on a new F-150 Platinum 3.5 Ecoboost FX4. Love the new truck and all the technology Ford stuffs into it. Apologies to all you die-hard GM guys but, it's built in Michigan, not Mexico and, so far anyway, it's a fantastic truck. Good luck to those of you still seeking a cure for the bad-vibes. Sincerely.

 

I'll plan on popping back in from time to time and check on how everyone's making out...

 

Best regards,

Vance

 

post-126477-0-56140200-1462903483_thumb.jpg

post-126477-0-80082000-1462903484_thumb.jpg

post-126477-0-81378400-1462903485_thumb.jpg

post-126477-0-56140200-1462903483_thumb.jpg

post-126477-0-80082000-1462903484_thumb.jpg

post-126477-0-81378400-1462903485_thumb.jpg

post-126477-0-56140200-1462903483_thumb.jpg

post-126477-0-80082000-1462903484_thumb.jpg

post-126477-0-81378400-1462903485_thumb.jpg

post-126477-0-56140200-1462903483_thumb.jpg

post-126477-0-80082000-1462903484_thumb.jpg

post-126477-0-81378400-1462903485_thumb.jpg

  • Like 1
Posted (edited)

2015 crewcab 4x4 5.3L shortbox.

 

Mine's smooth as glass - or so I thought. Speed limits around me are 55-60 most everywhere.

Was going 70+ the other day and suddenly found the vibration. Had to slow to about 55 for it to go away. Could then go back up to 65 no issues.

I don't know what to think about that - but sounds like im wasting my time with the dealer and balance.

Since its not going to arise often for me, and 99% of my driving is 65 or less I can live with the situation. When I noticed it, I'd say it was a mild imbalance kind of level. Noticable to annoying., esp. if day to day you had to drive 70 on an interstate. 4-5 out of 10, where 10 is sell the dam truck. If I had it constantly at the speeds I drive I'd be upset - so i can feel for those who live in a different area.

Edited by 15silver
  • Like 1
Posted

My '14 Sierra Z71 5.3 with factory 20" wheels also developed the dreaded 72 mph shake at around 17,500 miles. Bought some new tires, didn't completely cure it but improved at first, then, slowly got worse and worse up to 24,000 miles... Had my tires rotated, re-mounted and road-force balanced to .000, thinking that would surely do the trick. No dice. After reading so many articles and posts about the issue online, I solved my problem. Deciding I wasn't going to embark on a mission of back-and-forth to the dealer to try and have them diagnose and cure an obvious systemic design flaw, I traded in the "Black Bueaty" on a new F-150 Platinum 3.5 Ecoboost FX4. Love the new truck and all the technology Ford stuffs into it. Apologies to all you die-hard GM guys but, it's built in Michigan, not Mexico and, so far anyway, it's a fantastic truck. Good luck to those of you still seeking a cure for the bad-vibes. Sincerely.

 

I'll plan on popping back in from time to time and check on how everyone's making out...

 

Best regards,

Vance

 

attachicon.gifIMG_3617.JPG

attachicon.gifIMG_3618.JPG

attachicon.gifIMG_3619.JPG

Sharp truck!
Posted (edited)

http://www.autoguide.com/auto-news/2016/03/the-mysterious-chevy-shake-is-affecting-pickup-trucks-now-too.html

 

This Article came out March 2016, Proof & fact that there is a vibration issue in these trucks. End of discussion to the trolls on here. Don`t give the trolls on here any responses, because there trolls=idiots! And the moderator or owner of this site don`t care for your problems either. They love trolls, They want more image counts on the ads, and clicks. Your feeding the wrong helpers. Take it to your state Attorney Generals Office period.

 

Goodbye GM-Trucks .com troll city!

Edited by Gambit66

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Here's the second UOA on my 22 Wrangler with the Ecodiesel. This has 5k miles on AMSOIL Signature Series DEO 5w-40. The first one was dealer installed oil, no clue what it was, the second is what AMSOIL recommended, European FS 5w-40, Most of the Ecodiesel world is showing great results using the European MS 5w-40, I figured I would see how the DEO works. This is using an Ecoguard oil filter. It's my understanding this engine likes to shed aluminum.  We will see. So far I don't think this is too bad.    
    • I'm surprised nobody seems to offer a solution like the start/stop device I put in my new truck. Remembers my setting when shutdown. And while it still starts up in start/stop, it stores/evaluates what mode it was in when shut down and will change it whithin a second or 2 of startup. It'd be nice to have something like that for the DRLs.
    • 2015 Sierra 1500 here. Leaks from the sunroof to front driver side and soaks carpet. How do I fix this? Thanks!
    • I will be doing that for sure, but I need to solve who has/ where I can find a bidirectional scan tool that will support OBD 1.5. I'm kicking myself because I ebay'ed a Snap On MT2500 that I didn't think I'd ever need anymore. D'oh!! I'd rather not buy another, so I'll contact a few local shops to see if they have one and how much they'd want to do the procedure. I'd rather have the ability to do it myself... I wish there was a modern tool that could do it all, but I'd have no idea what to buy.   The theory with the pulled timing is that it mimics a rich condition. The delayed spark causes incomplete burn and the O2 sensor picks up low oxygen levels. That's interpreted as a rich condition so the PCM pulls fuel and that shows up in the deeply negative fuel trims.
    • An ultra wealthy man had the most beautiful daughter. But, there was a problem. Everything she touched would melt in her hands. No matter what, Metal, Wood, Stone. Anything she touched would melt. She could not feed herself. Because of this, men were afraid of her. Nobody would dare marry her. Her father was despaired. What could he do to help his daughter? He consulted doctors, scientists and anybody who could solve this problem. Finally one of them said, "If your daughter touches one thing that does not melt in her hands, she will be cured." He was overjoyed and came up with a plan. The next day, he held a competition. Any man who could bring his daughter an object that would not melt in her hands would be given billions of dollars to marry her. Three extremely intelligent and handsome young men took up the challenge. The first brought a very heavy steel rod, But alas, when the she touched it, it completely melted in a matter of seconds. He sadly went away. The second brought a beautiful diamond, knowing diamonds were one of the hardest substance in the world and would not melt. But alas, once she held it in her hand, it melted. He too was sent away disappointed. So now, there was one left He was very nervous & sweating. He approached the daughter & said, “put your hand in my pants pocket and feel what is in there." She did exactly what he asked. She felt something very hard. She held it in her hand, squeezing it as hard as she could. It did not melt & remained extremely hard. Her father was overjoyed. Everybody was overjoyed. She was finally cured. Nothing never, ever melted in her hand again. They married and they both lived happily ever after, raising a wonderful family. Question: What was in the the groom’s pants pocket??? Answer below ↓ M&Ms of course! They melt in your mouth, not in your hand. What on earth were you thinking?
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...