Jump to content

Recommended Posts

Posted (edited)

I did.... shifted like garbage. Not enough adjustability for that stuff yet to do anything like that. That's 8 speed though... 6 should be no problem to do whatever.

 

Sent from my SM-G900W8 using Tapatalk

Edited by 1994Vmax
Posted

Yeah mine shifted awful to and Justin has tuned on mine for a while now and turned it off and I was amazed at what a difference it makes. I was wondering how many has done so when tuning the transmission.

 

RT

Posted

I have done some minor tuning on my 20116's transmission. I reduced the upshift times by 30% and the downshift times by 35%. I turned off the upshift and downshift torque management and the truck shifts almost perfect. It will have to do until HP Tuners releases the pressure tables. As of now it is firm on every shift and gets after it on the shift time side. To be honest I could probably reduce the up and down shifts by 40% and it will be perfect.

 

I wish GM would take some cues from the Germans. My wifes Audi has a 8spd auto in it, under normal drive mode it shifts quick with no delay at all and just some slight firmness. Put into sport mode and the shift times are reduced in half and in snaps the shifts in place each time.

Posted (edited)

I have done some minor tuning on my 20116's transmission. I reduced the upshift times by 30% and the downshift times by 35%. I turned off the upshift and downshift torque management and the truck shifts almost perfect. It will have to do until HP Tuners releases the pressure tables. As of now it is firm on every shift and gets after it on the shift time side. To be honest I could probably reduce the up and down shifts by 40% and it will be perfect.

 

I wish GM would take some cues from the Germans. My wifes Audi has a 8spd auto in it, under normal drive mode it shifts quick with no delay at all and just some slight firmness. Put into sport mode and the shift times are reduced in half and in snaps the shifts in place each time.

LOL on the European Builders.... Hell my wife's Honda Pilot and my Daughters Civic shift better than the truck did until this last change and they are both Merican made!

 

RT

Edited by 07Softail
  • 2 weeks later...
  • 2 weeks later...
Posted

Instead of digging through 57 pages, I'm hoping someone can answer my question. I'm thinking about picking up a 2016 w/ the 8-speed. I have HPT with an available license. Are there any components that I won't be able to edit with the tune? Is the 8-speed fully supported with the newest version of HPT?

Posted (edited)

I have HPT and upon recommendation of how much of a buggy pos it is I haven't upgraded to the latest.. they were supposed to increase 8 speed support though which I want too. But in 2 weeks time they have revised the 3.2 release 25 times and it's still causing guys issues... so I will wait a bit longer. The current 8 speed stuff isn't hardly worth playing with.

 

Sent from my SM-G900W8 using Tapatalk

Edited by 1994Vmax
  • 2 weeks later...
Posted (edited)

My 2014 5.3 silverado has a supercharger kooks headers kooks exhaust and a cai and pcm dyno tuned my truck made 540 and 560 at the crank truck. Long story short my stick piston rods broke and came thru the block. My mechanic said the truck was running way to rich and pistons lost the lubrication due to it running to rich

Edited by Jb716
Posted

My 2014 5.3 silverado has a supercharger kooks headers kooks exhaust and a cai and pcm dyno tuned my truck made 540 and 560 at the crank truck. Long story short my stick piston rods broke and came thru the block. My mechanic said the truck was running way to rich and pistons lost the lubrication due to it running to rich

My 2014 5.3 silverado has a supercharger kooks headers kooks exhaust and a cai and pcm dyno tuned my truck made 540 and 560 at the crank truck. Long story short my stick piston rods broke and came thru the block. My mechanic said the truck was running way to rich and pistons lost the lubrication due to it running to rich

That's sucks man. Hate to hear about the bad luck

 

Sent from my SAMSUNG-SM-G870A using Tapatalk

  • Like 1
Posted

 

That's sucks man. Hate to hear about the bad luck

 

Been a the shop now putting another 5.3 in it and adding supercharger and headers to it until I have money to built a a vette ls3

  • Like 1
Posted

My 2014 5.3 silverado has a supercharger kooks headers kooks exhaust and a cai and pcm dyno tuned my truck made 540 and 560 at the crank truck. Long story short my stick piston rods broke and came thru the block. My mechanic said the truck was running way to rich and pistons lost the lubrication due to it running to rich

Posted

Yeah, making nearly 600 hp is one thing. Getting the beast to live a long time is another. Don't ask me how I know haha. Sorry for the bad luck man. Oh and btw old broken internals make for some good furniture and accessories for a man cave.

  • Like 2
Posted

 

 

Yeah, making nearly 600 hp is one thing. Getting the beast to live a long time is another. Don't ask me how I know haha. Sorry for the bad luck man. Oh and btw old broken internals make for some good furniture and accessories for a man cave.

crank is going to be a coffee table

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I don't wanna do major surgery/upgrades, behind-the-dash work, add amps, change radio etc. on my '26 std cab WT. On the WT, it has the base 7" IOR infotainment setup, and only two speakers (doors). Since I listen to classical, looked around for speakers that do well and dug thru reviews. Two-way speakers were found to be better than 3-way. So I've ordered a pair of  Infinity Reference REF-9632IX 2 way speakers.  [These may  or may not have been discontinued / succeeded by the 3-way ...9633 ones.]    These speakers are lauded for 3 ohm and 94db sensitivity spec so they'll work well for ordinary base car radios without amps and offer better performance (quality,  strength) than  default base paper-cone speakers. They'll be installed in a few days and I'll let y'all know what I think. Bill W San Jose      
    • Thanks!   Changed out the rear shocks today to Bilstein 5100s.  So far feel much better. The stock Rancho were wore out.  Lots of heavy hauling (2 moves, home renovations, etc).  Next up is new BFG tires Monday.  Cant wait the current tires have little to no wet traction and are super loud (hum)    
    • Ok, I got the all the codes. What do you all think would be a place to start?
    • How about I just point to the factory pans stand pipe little drain plug and claim its a pan with a real drain plug !. I just couldn't swallow the fact that a Dorman pan which at this point is probably the only pan out there that fits the gas version truck cost that much up here in Canada so I decided initially anyway to skip it and see what I thought of pulling the pan method and down the road if I felt inclined enough then I would either install a drain plug kit in the factory pan if there is enough room for it, or have a bung welded onto it, or put an aftermarket pan on. The thing is if the pan is not pulled then the magnets in the pan can't be inspected and cleaned or if wanting to change out the filter. However of course it certainly would make the job easier to be able to drop the oil first before having to handle the pan if dropping the pan that go around was the goal.    I knew a guy locally that was doing custom field spraying years ago with a pickup pulling a ground driven sprayer, I believe it was a GM pickup with an automatic trans. He had a drain plug in his pan and would drop the oil out of it once a week and top it back up through the dipstick tube to keep refreshing a portion of the oil often and that made the transmission last far longer than had he done nothing. Soft fields pulling 500 gallons of water at the start of each mixed up sprayer tank batch and in low range sucking along. I imagine he got some tips from other custom sprayer outfits doing the same thing at the time and learning from their blown up tranny mistakes. Transmissions then had no lock up converter so would cook the crap out of the fluid slipping that much and it would not have been synthetic fluid either. 
    • 3.39 Kroger’s in Montgomery Texas. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...