Jump to content

Recommended Posts

Posted
1 hour ago, MikeMSierra said:

My truck was built Sept 14, 2020 which appears to fall into the range.

Lol damn it Siri listen…… with at build date you should be concerned. Mine had a build date of December 2020 delivered in February 2021 and has the lifter failure issue at 6500 miles. 
 

You said yours was a 2020 Sierra. Which shouldn’t be affected….. 

 

I know one thing if you have the catastrophic lifter failure make sure they replace all of them not just one side demand this!!!

Posted

You can demand all you want but they are only going to replace what GM pays them to replace. 

  • Like 2
Posted
2 hours ago, elcamino said:

You can demand all you want but they are only going to replace what GM pays them to replace. 

Under warranty. You can pay to have done whatever you want of course.

  • 3 weeks later...
Posted
On 5/12/2021 at 7:17 PM, cioservices said:

I had my 2021 LT Trail Boss with the 5.3L engine towed to the dealership yesterday.  While driving home from work, the truck started a really rough idle, engine knocking, random misfiring, had Service Emergency Brake, Service ESC messages on the display, check engine light and several other dash warning lights.  I pulled a P0300 code for random misfire.  The dealer diagnosed the truck with a lifter failure.  I haven't been told which cylinder(s) had the failure, but has anyone else had this issue on a 2021 Silverado?  I have 6,200 miles on the truck, and this seems a bit soon to have such major issues with an engine.  At what point does GM decide this is a recall and replace all the lifters?  I suspect, based upon what I've read on the forums, most who are plagued with the failing lifter issue, return to the dealership with additional failed lifters.

Driving back from Pagosa Springs CO To Austin TX we stopped in Roswell NM for the night, got about 50 miles out of Roswell and had the knocking and misfiring, got it towed back to Roswell to Richland Chevrolet. Diagnosed with lifter issue, predictions is 3 weeks for repair. We couldn’t find a rent car, no good flights not even a greyhound bus to get home. Dealership really stepped up in customer service and got us set up with another truck to get home. Certainly not happy with 15k miles lifter issue but Richland Chevrolet understood our plight and really took care of us!

  • Like 2
  • 2 months later...
Posted

Can I get an update from anyone that had part or all of their lifters replaced? Any more problems, how many miles driven since, etc?

 

I’m 5 months out from having all 16 replaced at 5k miles. No issues since then but still a little traumatized. TIA. 

Posted

9 months/6000miles since all my lifters and 2 bet push rods were replaced. I have no issues I drive it like I stole it with no worries! 

Posted
4 hours ago, ram1067 said:

9 months/6000miles since all my lifters and 2 bet push rods were replaced. I have no issues I drive it like I stole it with no worries! 


That’s encouraging. Thanks. 

Posted

I just dropped my 2021 silverado 5.3 at the dealership with only 4700 miles and service writer said all lifter banks will be replaced and take a couple of weeks.  I was reading here that there is a class action suit in Michigan filed in January for this particular issue.  I plan to demand GM add an extended warranty for this problem that they have been aware of for years.  If I had known about this problem before buying , I would not have bought this truck at all.  

8995F246-D33E-401A-AE0F-045FE0CBA793.heic

  • Sad 1
Posted

Keep us post on the extended warranty request. Did the dealership provide you with a loaner? 

Posted

Just got my 2022 GMC Sierra 1500 Limited AT4 with the 6.2 back from getting all lifters, pushrods, cam and everything else associated replaced.  6,000 miles on the truck.  Now less than 200 miles from the fix and it's acting the same way it did right before it failed the first time.  Thinking it's going to have another lifter failure on the way home from work today..... Super frustrated because it love the truck.  But this is leaving a terrible taste.

Posted (edited)

Wow 2022 6.2 thought this was more of 2021 5.3 issue. 

Edited by ram1067
Posted (edited)
41 minutes ago, ram1067 said:

Wow 2022 6.2 thought this was more of 2021 5.3 issue. 

Yeah it really sucks.  Build date on my truck is 12/21, so the whole engine build date range theory might not hold much water.  I think it's an even bigger issue than they're letting on.  Also disheartening that the replacement parts don't seem to be holding up, at least in my case.

Edited by PacksAWallop
Posted
50 minutes ago, PacksAWallop said:

Yeah it really sucks.  Build date on my truck is 12/21, so the whole engine build date range theory might not hold much water.  I think it's an even bigger issue than they're letting on.  Also disheartening that the replacement parts don't seem to be holding up, at least in my case.

You have to look at the engine build date not the trucks build date

Posted
4 hours ago, Silverado4x4 said:

You have to look at the engine build date not the trucks build date

I understand that.  The point I was making is I'm nine to ten months past the supposed date range.  Pretty sure they wouldn't have an engine setting around for nine to ten mo ths waiting to go into a truck.  Could I be wrong?  Possibly, but that hasn't been the pattern so far.  Seems to be within a few months of the truck build date that the engine is built.  However I have not checked my engine build date.

Posted
17 hours ago, PacksAWallop said:

Just got my 2022 GMC Sierra 1500 Limited AT4 with the 6.2 back from getting all lifters, pushrods, cam and everything else associated replaced.  6,000 miles on the truck.  Now less than 200 miles from the fix and it's acting the same way it did right before it failed the first time.  Thinking it's going to have another lifter failure on the way home from work today..... Super frustrated because it love the truck.  But this is leaving a terrible taste.

This is certainly not what we like to hear, Tony.  Please know, customer satisfaction is extremely important to us. Our team would be more than happy to take a closer look into the concerns with your 2022 GMC Sierra 1500 Limited AT4. To do so, please send an email to [email protected] with ATTN: PacksAWallop/GM Trucks in the subject line.

Please include your contact information, VIN, a brief description of your concern, and the name of your preferred dealership. We look forward to hearing from you. To learn more about GM’s privacy policy, please visit https://www.gm.com/privacy-statement.html.
 
Privacy Statement | General Motors
Your privacy is important to General Motors. This Privacy Statement addresses the personal information GM collects and how GM handles that personal information.
www.gm.com
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • 3.19 @ Kroger’s in Montgomery Tx
    • We have now!  2027 GMC Sierra  Early look, but I'm a GMC guy and so far I think I like the looks of the Chevy better.
    • HD at the moment, are kinda their own deal.  How LTZ sells on those vs on 1500, there is a difference.   They are merging most of the mid trims on 1500.  LT, RST and LTZ are replaced by one trim, Silverado.  LT and RST are a BIG portion of sales.    Bad naming choice aside, the new Silverado trim will offer the spread of options that those three trims offered.  So expect to see things like the tech package for example, and memory seats.  And LT Trail Boss will now just be "Trail Boss" (formerly LT Trail Boss) but will offer content spread like the new Silverado trim will.  The press photos showed the Trail Boss (formerly LT Trail Boss) has access to Super Cruise now, which on the current truck was High Country only.       Here is the Trail Boss interior.  Memory seats and Super Cruise are present.  All things the LT Trail Boss it replaces, and the RST it was based on didn't get on the current gen.  You had to go to LTZ or ZR2 for memory seats, and High Country for Super Cruise.      
    • I installed a Hellwig rear sway bar on my 21 Sierra SLT, it made a huge difference on how the truck handles, no body roll, the trucks much more planted now. Not sure of the suspension differences between the 21 and 26,  if its body roll your having a sway bar will solve it. 
    • So a follow up and my fix. I found in online searches the live data to look at on a scan tool to verify the fuel tank pressure sensor was working.  It showed an spec number towards the lower end of the rang, but in spec.  Then while it was running opened the gas cap and the pressure should change.  It didn't change even a tiny bit.  The data for the purge valve said it was open...never changed. So then I measured the voltages on the plug for the fuel pressure sensor and they matched what it should be.  So local car quest parts had the sensor in stock...it was a bit of a pain to remove and an even bigger one to get it to actually go back in.  It helped to unbolt the driveshaft and bungie cord away from the gas tank to give a bit more room to work. So fuel tank pressure sensor in I cleared the code, and started it up.  I went to the scan tool's live data and... Eureka! The pressure number was different and fluctuated a bit.  So took it on a short drive and pressure number varied saw the purge valve go from closed to open and back to closed.  Drove it to and from work for roughly a week plugged in the scan tool no codes.  I took it in to get tested and passed.  In my state's infinite wisdom (oops meant greed), since I pushed the test with the maximum extensions I have to take it back in by Feb '27 to 'get it back up to date', then my next test won't be until Feb '29. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...