Jump to content

Recommended Posts

Posted

I still believe it to be the rear end assembly causing the problem. I am on my third 2014 and although this one doesn't have the shakes as bad. It still has a very bad "shutter" most noticeable

when letting off the throttle, like when exiting the interstate and taking foot off the gas but not stepping on the brakes. And then there is the" jitters" in the steering wheel where you seem to feel EVERY little crack in the road. Kinda feels like rumble strips. And then there is the "shudder" when taking off from a start. First gear=shudder, second gear=shudder, third gear= pulls great.

 

 

???


I still believe it to be the rear end assembly causing the problem. I am on my third 2014 and although this one doesn't have the shakes as bad. It still has a very bad "shutter" most noticeable

when letting off the throttle, like when exiting the interstate and taking foot off the gas but not stepping on the brakes. And then there is the" jitters" in the steering wheel where you seem to feel EVERY little crack in the road. Kinda feels like rumble strips. And then there is the "shudder" when taking off from a start. First gear=shudder, second gear=shudder, third gear= pulls great.

 

 

???


I still believe it to be the rear end assembly causing the problem. I am on my third 2014 and although this one doesn't have the shakes as bad. It still has a very bad "shutter" most noticeable

when letting off the throttle, like when exiting the interstate and taking foot off the gas but not stepping on the brakes. And then there is the" jitters" in the steering wheel where you seem to feel EVERY little crack in the road. Kinda feels like rumble strips. And then there is the "shudder" when taking off from a start. First gear=shudder, second gear=shudder, third gear= pulls great.

 

 

???


I still believe it to be the rear end assembly causing the problem. I am on my third 2014 and although this one doesn't have the shakes as bad. It still has a very bad "shutter" most noticeable

when letting off the throttle, like when exiting the interstate and taking foot off the gas but not stepping on the brakes. And then there is the" jitters" in the steering wheel where you seem to feel EVERY little crack in the road. Kinda feels like rumble strips. And then there is the "shudder" when taking off from a start. First gear=shudder, second gear=shudder, third gear= pulls great.

 

 

???

Posted

I'm nearing the end of the repurchase process and the turn-in date for my truck is soon. The gentleman handling my case said "sorry for the delay on this, we’ve just been swamped".

Posted (edited)

 

.

I have the same issues ... When I punch it off the line I get a slight shudder in first gear. When I am doing like 60 mph and let off the gas I also get a slight shudder. It's not real bad but feels a lot worse when you pay 45k for a new vehicle and it does shit like this.

 

I am gone to live with it for now cause I don't want my brand new truck ripped apart at the dealer looking for the issue. When I schedule my next oil change, I am going to ask them to rebalance the tires and go from there. Maybe I will get lucky.

 

 

 

Edited by MudMutt
Posted

 

then again, maybe you are just a GM rep trying to do some sort of damage control

You've been smoking a bit too much pot, son.

Posted

You've been smoking a bit too much pot, son.

your posts prove otherwise

Posted (edited)

You know.. It's strange how I've gone to a Chevy and GMC dealership that are right next to each other (owned by sepearate companies) and when I asked the service advisors regarding issues with the new 2014 Silverado/Sierra, they both have said aside from the recalls, they see very few issues with them thus far. When asked about the "shake/vibration" issues, both looked at me with a "what are you talking about?" type of look and said they have yet to see one come in for issues described as that save for an ocasional out of balance issue that is usually a result of the owner hitting a curb or something. Thus far we have 254 pages on this topic, and I am guessing maybe 200 if even that many people have said they have the shake/vibe issue on this forum alone. Since most folks will take to the internet to do a search on a issue and this topic would certainly be at the top of the search engine results, I think if this was a wide spread problem like a few on here seem to think it is, we'd be seeing a lot more activity here. The issue is not happening to every 2014 GM truck like some think it is and act as though it is. I'm no statistic person, but I truely wonder just how many people have this issue, out of all the 2014 Sierras and Silverados that have been sold

Just from what I have experienced over the years when purchasing new vehicles from trucks to snowmobiles to atv's whenever I have had a problem with any of them and it is a well known problem with the product the dealer of the product has never heard of the the problem and gives you the I have no idea what you are talking about look,but rest assured they know exactly what you are talking about,it is in there own best interest not to admit there is any problems with there product obviously,I have a good truck with no vibration and I thank my lucky stars for that but I certainly feel for these owners that have the problem because I know I have been in there shoes before and it is a helpless feeling for sure.

Edited by Tqjunkie
Posted (edited)

It is not just the Silverados, I had a 2015 Suburban 2WD that had the shakes. AFM was a nightmare on that thing with the vibration at cruise in V4 on the highway, any little throttle input that did not kick it into V8 would shake the crap out of the vehicle. Made me happy to get back to the silverado. Where will it end???

 

It was a rental with 15,000 miles

Edited by 14silverado4.3
Posted

Tonight, I'm gonna open the diff and check the backlash and circumvent all the road force/balancing/wasted time.

If the backlash is within tolerance, I'll put a set of tires on it, and do a few other mods I have been putting off.

 

In the last couple weeks, my vibration has all but went away. 43-48mph steering wheel vibe.

 

I know someone posted before, the backlash specs. I found 5-7 ten thousandths, .0007 being the max....does this sound correct?

Tonight, I'm gonna open the diff and check the backlash and circumvent all the road force/balancing/wasted time.

If the backlash is within tolerance, I'll put a set of tires on it, and do a few other mods I have been putting off.

 

In the last couple weeks, my vibration has all but went away. 43-48mph steering wheel vibe.

 

I know someone posted before, the backlash specs. I found 5-7 ten thousandths, .0007 being the max....does this sound correct?

Posted (edited)

Tonight, I'm gonna open the diff and check the backlash and circumvent all the road force/balancing/wasted time.

If the backlash is within tolerance, I'll put a set of tires on it, and do a few other mods I have been putting off.

 

In the last couple weeks, my vibration has all but went away. 43-48mph steering wheel vibe.

 

I know someone posted before, the backlash specs. I found 5-7 ten thousandths, .0007 being the max....does this sound correct?

Tonight, I'm gonna open the diff and check the backlash and circumvent all the road force/balancing/wasted time.

If the backlash is within tolerance, I'll put a set of tires on it, and do a few other mods I have been putting off.

 

In the last couple weeks, my vibration has all but went away. 43-48mph steering wheel vibe.

 

I know someone posted before, the backlash specs. I found 5-7 ten thousandths, .0007 being the max....does this sound correct?

It would be .007 not .0007 If I remember right

Edited by Silverado 6.2
Posted

We have owned a 2013 Silverado 150 extended cab 5.3L 2WD and 20" Good Year Wrangler tires for 22 months. The 6-speed auto was a vast improvement over our 08 Sierra 4-speed.. Just after our first tire rotation and wheel balance, we got onto the highway and noticed the front end shaking. We immediately returned to the dealer and had the wheel balances checked. It was determined that the load force on one front tire was considerably out of specs. It was not noticeable on the rear, but we have Firestone Ride-Rite air bags on the rear for hauling a cargo trailer. The service department suggested replacing the tire (at our expense). We didn't give it a thought that it should have been covered under warranty and we paid for a new tire. That basically took care of the severe shaking. But we have noticed that it was not a really smooth ride even on a newly paved blacktop. We replaced the Sierra tires with Bridgestone and had very good results. If we replaced the tires on the Silverado, we would go with Michelin.

 

So, this forum has brought up a couple of questions. Is it worth the gamble to move "up" to a '14 or '15 Silverado or Sierra and get a 4WD and all-wheel disc brakes or wait until GM gets their act together? If we do decide to trade, will it be with the same dealer who neglected to suggest the tire should be under warranty?

 

One other thought that came to mind on front end shaking. On our '08 Sierra, we had a problem with the front brake calipers. On light braking, the front would shudder slightly. On downhill braking, the shudder was more pronounced. We took it to the dealer before a long road trip hauling a fully loaded cargo trailer. We were told there was nothing wrong with the brakes. On a steep decline in the hills around Chattanooga, even though we had trailer brakes, the front end shook violently-so much so that we thought the bug shield was going to break off of the hood. Believe me, that was a white knuckles ride to the bottom. The dealer at the other end of the road trip said that GM had a bad run of rotors/pad that would warp with heat of braking and resume near normal when cooling. They replaced both rotors and pads at no charge. We had perfect braking after that.

 

The reason that I bring up brake rotors is that if the pads are too close to the rotors and the rotors are warped, they may be engaging enough to cause the shudder similar to a wheel balance. With the new integrated braking systems, this could be a problem.

 

As for Dodge and Ford, we have had both in the past. The '02 Dodge Quad cab was extremely bad on gas and had engine sludging faults and cracked dashboards that Chrysler did not view as a problem. Ford has its own problems.

Posted

Tonight, I'm gonna open the diff and check the backlash and circumvent all the road force/balancing/wasted time.

If the backlash is within tolerance, I'll put a set of tires on it, and do a few other mods I have been putting off.

 

In the last couple weeks, my vibration has all but went away. 43-48mph steering wheel vibe.

 

I know someone posted before, the backlash specs. I found 5-7 ten thousandths, .0007 being the max....does this sound correct?

Tonight, I'm gonna open the diff and check the backlash and circumvent all the road force/balancing/wasted time.

If the backlash is within tolerance, I'll put a set of tires on it, and do a few other mods I have been putting off.

 

In the last couple weeks, my vibration has all but went away. 43-48mph steering wheel vibe.

 

I know someone posted before, the backlash specs. I found 5-7 ten thousandths, .0007 being the max....does this sound correct?

 

  1. Hold the drive pinion stationary and move the ring gear back and forth.
  2. Repeat the measuring procedure at each tooth around the ring gear.
  3. The difference between the backlash at all of the measuring points should not vary by more than 0.05 mm (0.002 in).
  4. If the difference between the backlash at all of the measuring points varies by more than 0.05 mm (0.002 in), inspect for burrs, a distorted case flange or uneven bolting.
  5. If the difference between all the measuring points is within specifications, the backlash at the minimum lash point measured should be 0.08-0.25 mm (0.003-0.010 in) with a preferred backlash of 0.13-0.18 mm (0.005-0.007 in).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • not all plugs will be used.  gm uses more generic harnesses that support most/all options, and if your truck doesn't have a specfiic option, the plug won't be used (commonly will have a dummy insert in the plug , or it'll be taped up, but some may just be left as is).  But it's sldo possible some p.o. has installed the wrong/cheaper parts that aren't correct for your vehicle...
    • First off, I'm not trying to just get easy advice/fixes for the issues I've noticed so far.  I'll be combing through the site via searches and such, and if past experiences are any indication, should find what I need.  For the sake of conversation, though, I figured I'd post the handful of things I've noticed in the 12 hours since buying my 2010 SLE CCSB.     Indicator lights: Airbag and TPMS.  The tire pressures aren't reading for any of the wheels, so I'm pretty certain the sensors were either removed, are damaged, or are otherwise inoperable.  I used to mount and balance tires 25 years ago but am pretty much ignorant when it comes to TPMS.  My 2006 didn't have the sensors and this might be the fourth vehicle I've owned that does.     Radio: Rear speakers aren't working.  I removed the driver's side rear door panel and checked the speaker and wiring.  I also removed the sill and b-pillar covers to check the wiring.  A few minutes of Google Fu showed that this is potentially a head unit issue.    Switches: Power mirrors don't turn left/right.  I ordered replacement driver's door switches that should arrive tomorrow.  The windows and locks work but it was only about $20 for all of them.  The driver's side rear window switch lets the window down but won't put it back up.  I think the passenger rear doesn't work at all.  In the coming days/weeks, I'll break out my multimeter to check all of that.   Unknown wiring harness: There's a box attached to the front driver's side of the engine compartment, right where the second battery shelf is located.  There are three plugs, one of which looks like it fits a standard headlight-style bulb (9007 or similar).  It doesn't look like it's plugged into anything.  I'll do some digging and if I don't see anything elsewhere on the site, post some pictures here.   Unknown plugs on brake booster: There are at least two female plugs on the brake booster that aren't being used.  I think it might be a replacement/aftermarket, so maybe those are used for a different application, as there don't seem to be any unplugged harnesses and no indicator lights are on.   Little squeaks when turning: Sounds almost like a bushing around the bed of the truck.  I'll have to pay close attention as I get more familiar with the truck.   Clunk on acceleration: possibly the infamous drivetrain clunk.  My 2006 had it and I'm just not familiar enough with this truck yet to fully grasp what it is.   Anyway, my apologies for the vague and all over the place post.  This truck is new to me, and it's been four years since I drove my 2006.  With 200k miles, I know I'll need to learn this truck quickly to avoid having any major issues, despite being confident it's got much more life to it.  My 2006 had nearly 320k on it when I parked it (nearly 300k of which I put on the truck), and it was still drivable then, though I suspected the head gasket might have blown.  I'd hoped to have that truck back by now, but it's gone forever, as I detailed in my reintroduction thread.  
    • I always drive in Sport mode. With more driving, I am finding the initial response when accelerating is much quicker now🖕 Lou
    • Is it an optical illusion in the pic or is the truck really squatting that much horribly?
    • My initial introduction was here.  It's hard to believe that I last posted in February 2013, having just deployed to Kyrgyzstan.  Since then, I've retired from the military and the 2006 Sierra SLT Z71 that first brought me to these pages was lost.  I went forward to Afghanistan in March 2013 and did a lot of sitting behind a computer on brigade staff.  Within 18 months of getting back to the States, I was selected for Drill Sergeant duty, after which I moved back to Virginia (my home state and where I served from 2004-2008).  That '06 Sierra did a lot of driving between Louisiana, Georgia, and Virginia, and ended up with nearly 320k miles by 2022.  By then, the registration had been expired for a couple of years, but the pandemic had all but eliminated tickets for such transgressions.  Admittedly too, I usually drove my wife's SUV or son's car the 2-3 times a week I had to report to work.  Teleworking sure was fun while it lasted.   I started my retirement leave four years ago and stored the Sierra at my sister's house.  A big mess was made when her fiancé passed while she was taking care of business out-of-state in late-2024, and his son pretty much mismanaged everything to do with the estate.  Even so, I was assured that my truck was safe... until it wasn't.  I found out that my truck had been scrapped about four months after the son took over everything.  There's nothing I could do; I'm 1000 miles away and it was technically abandoned property since he'd even trespassed my sister from her own house (she had no claim to it as she wasn't married, and the fiancé was the sole owner).     Anyway, today I got my second Sierra.  This is a 2010 SLE 2WB CCSB with a little over 200k miles on it.  It's got the 5.3L I'm familiar with and should handle what I need it for.  Hauling stuff that won't fit in the Transit Connect (yep, I sold out, but that's the wife's vehicle) and towing a few times a year tops.  The price seemed decent, considering how much people sell their trucks for in the Deep South: $4500.  I've seen similar trucks listed for more than double that.  I got it from a coworker who left his tag on until we transfer the title next week (Louisiana requires a notary for transfers), so I've been driving it all day.  The rear speakers don't work, which is one of the things that brought me back to these forums earlier.  I can't say how active I'll be as a poster, but I'll be scouring the archives while I find out every little thing I can about the 2010s and particular nuances/problems with my truck.   It's definitely not a GMC, but I got another Willys Jeep a few months back as well, so I'm almost at the same place I was when I first joined gm-trucks.com.  My old 1960 DJ3A was sold back around 2010 or 2011; my current Jeep is a 1946 CJ2A.  So, I've got a slightly newer GMC and a much older Jeep.  I kind of wish I still had that F-250 I had way back when too.  The Dakota is long gone and was technically my brother's truck, though I had it registered and insured.  The F-250 had to go when my grandmother's house was foreclosed on due to mismanagement around 2012 or so.     Hopefully anyone that made it this far isn't too annoyed.  I tend to be long-winded, but I'll be doing more reading than posting in the coming months.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...