Jump to content

Recommended Posts

Posted

I honestly think the problem has nothing to do with the running gear. I'm willing to bet all mfg's have the same tolerance level when it comes to NVH. It has more to do with the fact that Chevrolet is not isolating the problem like it should be.

 

Fix this you'll fix the shake. Look at it this way; you can put cement cab mounts on the truck and it will ride like dog crap. Now you can say it's a wheel balance, driveline, rear end, or a plethora of other things, and you'd be correct to an extent; but no matter what you do, it will still ride like crap with cement mounts.

 

Chevy needs to address either the front suspension, cab mounts, or both IMO. Isolation will go a lot further than trying to systematically track down every little vibration.

At this point after months of measuring run-out, RF balancing everything multiple times, match mounting, trying different shocks and so forth I agree the problem is isolating the driver from the vibrations. High strength frame and high strength steel body make great conductors for the vibrations. The million dollar question is why is it so much worse in certain trucks?? I've ridden in my co workers 14 silvy CC and its vibration free. It's like everyone is saying, a lot of parts at the top of their tolerance and an unforgiving frame and cab. I took a 15 ram laramie 4x4 cc out for a test drive and while it was smoother, it wasn't vibration free either. I wasn't wowed by the truck to the point I was willing to trade mine in on it some other members are claiming night and day difference and glad they traded out but that wasn't my experience, it has features the GMC doesn't but the same is true for my SLT, it has features Ram doesn't offer as well, and IMHO the GMC is a much better looking truck inside and out.

Posted

Not sure what the deal is, the .jpg link is broken for me...but hopefully you got nothing short of full MSRP trade. That is what I got, and what everyone should get when trading in a lemon.

 

That is what GM does. They offer you 2 crappy deals, maybe a third, then the arbitration date is set...and a day or 2 before arbitration, you will get a call saying they basically give up, and will give you full MSRP trade. Accept nothing less.

Ehhhh.... Sort of. I didn't get offered MSRP as a trade but because the District Manager assisted with trade assist, the fact this was one of the 20% off trucks and then the dealer took off the dealer hold back/mark up, it worked out. Was it an even trade? No. Am I currently happy, 99% yes.

 

I couldn't being myself to go thru the process of switching brands and frankly, I like the Sierra's the best, so....we will see. So far, LOVE the space of the crew cab and the new truck smell.

 

 

Sent from my iPhone

Posted

I called the lawyer they were short staffed due to the holiday weekend will call me Tuesday. I fou d my replacement truck (as long as it dosent vibe) at a local dealer. MSRP is a bit higher maybe $400 ill pay it

Posted

Did you stay with the Blue ? I like that color and the green. But I am tied to SIlver as I have a painted to match Paragon bed cover.

Posted

Yes i will be staying w blue for sure love this color its amazing get all kinds of compliments on it and my 5 year old loves blue. Will make sure to get a 3.42 not the 3.08, will not get the z71, and will get the slider/conv package, heated cooled seats and trailer brake. MSRP is just slightly higher for the new one

Posted

Well my truck has been at the dealership for a total of 32 out of 113 days owned with vibration issues. So far I've had a set of rear tires replaced, two full sets of front tires (1 set with 150 miles and another with 350 miles put on them), replaced rear shocks (supposed 10mm dead space in one shock), balanced and rotors, checked specs on ring/pinion, replaced rear driveshaft......AND....to no one's surprise it still shakes. Howwever, the shake has changed and gotten worse. From 0-60 truck is great. 60-68 smooth but vibration starts coming in. 68-75 very noticeable vibration in steering wheel, seat, door panel and now the pedals. 75-90 you better hold on its gonna get rough. So to really see how bad the issue was after I test drove it, after it was supposedly fixed from the dealer and passed on the pico, I took my foot off the gas and naturally let the truck decelerate from 90 to 60. Wow is really all I have to say. The truck now seems to have a deceleration vibration that is even worse.

 

As of now it shakes while accelerating from 60 to 90 and shakes just as bad coasting from 90 down to 60. The Service Manager is at a loss for a solution and shocked. Supposedly the regional GM rep will be looking at my truck this coming week. I can only hope I have the end result as some of you other guys with an MSRP truck exchange program.

 

I'll keep everyone posted. I'm hoping they make it right so I don't have to go through the BBB. Any advice or direction would be greatly appreciated.

Posted

This is getting insane. Money and time wasted on the same remove and replace this, that and the other part over and over again with no positive results. It would not surprise me if GM decided that the real fix would be to return to the 55 MPH national speed limit since they seem to have gotten nowhere after all this time. What's that saying about repeating the same thing expecting different results?

Posted

Well my truck has been at the dealership for a total of 32 out of 113 days owned with vibration issues. So far I've had a set of rear tires replaced, two full sets of front tires (1 set with 150 miles and another with 350 miles put on them), replaced rear shocks (supposed 10mm dead space in one shock), balanced and rotors, checked specs on ring/pinion, replaced rear driveshaft......AND....to no one's surprise it still shakes. Howwever, the shake has changed and gotten worse. From 0-60 truck is great. 60-68 smooth but vibration starts coming in. 68-75 very noticeable vibration in steering wheel, seat, door panel and now the pedals. 75-90 you better hold on its gonna get rough. So to really see how bad the issue was after I test drove it, after it was supposedly fixed from the dealer and passed on the pico, I took my foot off the gas and naturally let the truck decelerate from 90 to 60. Wow is really all I have to say. The truck now seems to have a deceleration vibration that is even worse.

 

As of now it shakes while accelerating from 60 to 90 and shakes just as bad coasting from 90 down to 60. The Service Manager is at a loss for a solution and shocked. Supposedly the regional GM rep will be looking at my truck this coming week. I can only hope I have the end result as some of you other guys with an MSRP truck exchange program.

 

I'll keep everyone posted. I'm hoping they make it right so I don't have to go through the BBB. Any advice or direction would be greatly appreciated.

What body style of truck? crew cab 4x4?

  • Like 1
Posted (edited)

 

I'd chock it up to mfg tolerance differences. Another thing to note is; the trucks that were the worst had 20" and larger wheels. My truck has 22's and the two High Countrys I drove which were almost as bad had 20's. Bigger wheels and lower profile tires lead to less absorption of road anomalies before being transferred to the suspension. This is just an educated guess on my part, but I'd wager to be on the right track.

 

Keep in mind also; most people might not even be akin to the vibration unless it's pointed out. One of my employees has had his truck for 5,000 miles and claimed it's perfectly smooth. I went out and drove it and it also exhibits a shake; albeit minor. After pointing it out, it's now driving him crazy, lol.

Very possible that some may not be akin to the vibration. I have a '14 Sierra crew 2 wheel drive with GM 22's and it's vibration free. I've taken it up to 90 and the water in my bottle was not jumping around. I have a savvy for noises and vibrations. A co worker has a '14 Sierra with 20's and I rode in his and it was smooth as well. I have no clue what's causing the vibration as some have had it corrected with tires, balancing and some haven't. Different combinations of things I guess. Some 14's have a vibration some don't. Some 15's do and some don't. I feel for you guy's having vibrations. When you spend that kind of money on a truck, this shouldn't be an issue. Wonder what the new 16's will be like? The front end cosmetics have changed but I'm sure it will be on the same platform.

Edited by mafd2
Posted (edited)

Ok so after visit 3 it seemed better. Took a 3+hr drive to Ft Wayne IN. I now have a constant low dull vibe under my butt in the seat almost numbing after a long haul. No more console shake though. Much more pleseant but still not fixed..... calling the lemon lawyer Tuesday for sure now.....

Edited by afireinside7444
Posted

My girlfriend got my truck on the highway today and called me because she thought it had a flat. 2014 Sierra 22000 miles. She says she there's a vibration above 70mph. I remembered seeing this thread but hadn't had it on a smooth highway for an extended period of time yet and didn't know if my truck was affected. I drove it today and confirmed that it vibrates. Not horribly but definitely enough to annoy. What are the odds on GM fixing this?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Lake Speed is drumming up business for his company just by being in the spot-light so he has a vested interest in stoking the 0W-20 fire.  IMO  
    • I knew when I bought my truck that it had off road hill decent or craw control or whatever they call it and rolled my eyes at that but it gets throw on with other options my truck has, I just never had a heads up if the highway speed regular cruise setting had anything to do with the brakes and that took me by surprise. If you've ever been to the top of Pikes Peak and watched those ahead of you on the way down with their brake lights on constantly, one can guess they are probably not gearing down or not enough anyway if their vehicle will allow and a good reason their is a brake check spot part way down where they use an infra red heat gun to check how hot ones brakes are front and rear.    Your right that once one gets out of the front range by Denver and I've not been on that stretch of 285 between Denver and Fairplay myself but I know its high and Fairplay at 10000 feet, Buena Vista at 8000, it drops a bit from there but then your going back up and over the 11000 pass and Durango is at 6500 . So yes your definitely right that 6500 and a lot higher is the theme of going anywhere out in that direction from Denver but hey, the down hill sections give fantastic fuel mileage !.    I don't even look at the fuel pumps for what premium costs here, since I live on a farm and up to this point get fuel delivered I am rarely in front of a fuel pump and when I am, I am often using card lock bulk fuel stations so it tells me what the price is AFTER I buy the fuel. Looking up on gas buddy and converting to US gallons but in Canadian dollars, regular on average of the prices listed was around 5.95 and premium is around 7.00 . That was one reason I did not go for the 6.2 half ton aside from its lack of carrying/towing if one was going by the rule of using premium fuel and until recently one could only buy regular farm gas if playing the few cents off game for farm dyed fuel for a "farm licensed pickup". But yes I hear you on the fuel price difference and like the diesel theme with it often being more expensive then gas it doesn't have quite the charm to it either as it once did although right now here for some reason the price of diesel has come down more so its now inline with the price of regular gas. 
    • I agree with this assessment. As you know I’m testing longevity with vehicles for the first time. I have a few vehicles I passed to kids and grandkids. We’re all past 100K miles some approaching 170K. I’m the only one doing 5k oil changes. The rest whatever the minder says. I’m the only one doing frequent transmission service. My odyssey the trip vehicle at 200K will be finished as a trip vehicle. I recently changed to high mileage oil, Valvoline. I can’t get past the fact that all manufacturers want to claim long service life. I just don’t make sense that they would go with low weight oil for mileage. While sacrificing longevity.
    • There's absolutely a mountain of profit in catering to the "I do my own research" crowd, people who are certain they know better. And I don't mean there isn't data to support that 0w40 produces less wear product than 0w20 in an engine like the 3.0 Duramax, that only feeds them the assurance they need. Again, my whole thing with oil selection is, sure, 0w40 or 0w30 produces less wear product. Are we talking the difference between the engine lasting only 100k versus 200k? Or are we talking more like, if the engine will already go 350k on a good 0w20 regimen recommended by the OE, is using 0w40 going to get us to 355k, assuming we can even get the rest of the truck to last that long, meanwhile sacrificing the first 5y, 100k in powertrain warranty. The answer isn't easy, there are tradeoffs.   I willfully use 0w20 Dexos D for this reason, knowing that a 0w40 will produce slightly less wear. I don't believe the delta in wear product is meaningful over the lifetime of the engine, and I place much more importance on driving style and overall feeding and care of the engine as a whole. It's the mentality that someone can abstain from alcohol their whole life which is an amazing boost to health by itself, theoretically. But if they're sedentary, that lifestyle choice will most likely kill them young despite their other, concerted efforts. Maybe someone doesn't drink AND they are the perfect picture of health and activity AND they use 0w40 AND they treat their engine perfectly. If living until 130 years is the goal, sure, do that. But it's going to be a really old truck falling apart around a good engine for that last 30 years, without a doubt.   I watched Demonworks' other video on the 100k+ 3.0 Duramax that had dealer 0w20 changes on what appears to be OLM-prescribed intervals (8-10k).   The QR codes are still present and readable on the main bearings. That's how little wear it has.   That's not proof that anyone else should stick to 0w20, but it's confirmation, for me, that 0w20 is perfectly acceptable to use in these engines.
    • 1Based on independent testing of OE 0W-20 in the Peugeot TU3M Wear Test as required by the dexos1 Gen 2 specification.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...