Jump to content

Seat Movement Issues

jdvaughn

By jdvaughn
in Troubleshooting & Recalls

 Share

Recommended Posts

scott19677 Senior Enthusiast

scott19677

Posted
Posted

I had this exact fix completed on my seat 2 weeks ago and it's great now.. I'm very happy with this fix. At first they said it was for cadillacs only but still ordered the parts and installed them as listed above. As soon as I got in after the fix it felt like a new seat, much firmer and solid. 2 weeks and 2000km later it still feels great, I think they finally closed the door on this issue.. Now get your truck in too, you'll be happy you did...

Good to know. I go in on on Monday for the third time for seat. I hope for the last time.

  • Like 1
  • Replies 1.1k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

hotrodz37
hotrodz37

So I was able to solve the seat movement issue as a few others with hose clamps. I bought 2 - 1" hose clamps, and 2 - 3/4" rubber clamps and slid the rubber off of those and onto the hose clamps. I bu

GMC-AT
GMC-AT

whatever... I'm sure 2013 Chevy was perfect and had no issue. I'm sure your 1996 Ford is also perfect and never had any issues ... The truth is that every car/truck, every year has it's issues. Th

tanner709
tanner709

Thanks for this.   Just re-quoting for all the new members because I spent about 20 minutes trying to find the fix, with pics.

Posted Images

CbraSvt01 Enthusiast

CbraSvt01

Posted
Posted

Just called the number listed for GM and checked my VIN for recalls. The lady could find nothing associated with my car, she opened a case for me and took the campaign and recall number. Apparently the higher ups are suppose to look into it....worthless.

  • Like 1
Crf450r420 Enthusiast

Crf450r420

Posted
Posted

Mine started doing it last week. Shifts left and right on half my turns. Bring it up the next time I'm at the dealer.

Smoothbassman Enthusiast

Smoothbassman

Posted
Posted

So I was able to solve the seat movement issue as a few others with hose clamps. I bought 2 - 1" hose clamps, and 2 - 3/4" rubber clamps and slid the rubber off of those and onto the hose clamps. I butted them up against the inside of the two white clips on the front of the seat rail. As you can see below the clamp doesn't but up against the entire clip, just the white part protruding at the top. I kept trying to get it right against it, and didn't realize until I took the picture that the white part sticking out was what it mated up against.

 

eza4ehap.jpg

 

evyjy9eb.jpg

 

Here are the parts that I pulled the rubber off of to go on the hose clamp:

 

http://www.ultimategarage.com/frontpage-images/ABARubberClamp1.jpg

 

So far so good and this seems to be a fix until GM comes out with a better one or if they don't, it will remain permanent. Hope this helps anyone who is having this issue!

 

Sent from my iPhone using Tapatalk

Use this method, solves the issue. At least it did for me.
MTB Enthusiast

MTB

Posted
Posted

I just dropped my truck off at the dealer for the transfer case recall. Again I listed the seat movement issue with the service writer. I also listed a pressure sensor going bad on the right front wheel. It constantly is reading 27psi... When my tire gauge and house compressor shows it at 35. Something may get done this time, the service writer seemed very knowledgeable about the seat, the recall and the sensor.

GearheadSS Enthusiast

GearheadSS

Posted
Posted

My service dept. just performed the bulletin repair on my seat. Here's hoping that did the trick. I'll report back after a couple of days of driving.

MBear Enthusiast

MBear

Posted
Posted

I'm happy to report that I have had the fix installed for a couple of weeks now. The seat feels solid...no hint of movement so far.

CbraSvt01 Enthusiast

CbraSvt01

Posted
Posted

Is this just an SLT issue? I've driven an SLE for a few weeks as a service loaner and never noticed movement in the seat. Come to think of it, the truck as a whole felt much more solid with no squeaks or rattles. I sometimes wish I just would have got cloth seats...

MTB Enthusiast

MTB

Posted
Posted

Update on my truck. The ticket is still open on the seat issue on my truck. The owner of the dealership told me they are researching what needs to be done to correct my issue. All of my other problems have been taken care of. Even the tire pressure sensor. Embarrassingly it appears I may have had a small leak in that tire.

Utemachine Enthusiast

Utemachine

Posted
Posted

I just got off the phone with my dealer and they said the seat is officially a brand new recall. They ordered parts for my seat two weeks ago and they are still waiting on the shims. He anticipated another 3 weeks for the shims to arrive. What a joke!

TxTruckMan Senior Enthusiast

TxTruckMan

Posted
Posted (edited)

I just got off the phone with my dealer and they said the seat is officially a brand new recall. They ordered parts for my seat two weeks ago and they are still waiting on the shims. He anticipated another 3 weeks for the shims to arrive. What a joke!

I think there are two different seat problems. One related to the seats moving/clicking side to side in turns (TSB, not a recall), and one related to bad welds in the seat (recall). Not the same issues.

 

My Denali has developed the seat clicking when turning. I'll mention it to my dealer when I get my next oil change and have the other recalls done.

Edited by Black03Yukon
Utemachine Enthusiast

Utemachine

Posted
Posted

I think there are two different seat problems. One related to the seats moving/clicking side to side in turns (TSB, not a recall), and one related to bad welds in the seat (recall). Not the same issues.

 

My Denali has developed the seat clicking when turning. I'll mention it to my dealer when I get my next oil change and have the other recalls done.

He mentioned the shims are what will take so long because of the volume of shims they will need for the recall. When did the TSB come out?

leviblue Enthusiast

leviblue

Posted
Posted

I've had my seat shimmed twice. It wasn't repaired that way. I'm using the clamps until a fix is identified. I sent the TSB info to the service advisor for a follow up.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • davester
      New to Me 2010 SLE (Quirks, Issues)

      By davester · Posted

      not all plugs will be used.  gm uses more generic harnesses that support most/all options, and if your truck doesn't have a specfiic option, the plug won't be used (commonly will have a dummy insert in the plug , or it'll be taped up, but some may just be left as is).  But it's sldo possible some p.o. has installed the wrong/cheaper parts that aren't correct for your vehicle...
    • fm2176
      New to Me 2010 SLE (Quirks, Issues)

      By fm2176 · Posted

      First off, I'm not trying to just get easy advice/fixes for the issues I've noticed so far.  I'll be combing through the site via searches and such, and if past experiences are any indication, should find what I need.  For the sake of conversation, though, I figured I'd post the handful of things I've noticed in the 12 hours since buying my 2010 SLE CCSB.     Indicator lights: Airbag and TPMS.  The tire pressures aren't reading for any of the wheels, so I'm pretty certain the sensors were either removed, are damaged, or are otherwise inoperable.  I used to mount and balance tires 25 years ago but am pretty much ignorant when it comes to TPMS.  My 2006 didn't have the sensors and this might be the fourth vehicle I've owned that does.     Radio: Rear speakers aren't working.  I removed the driver's side rear door panel and checked the speaker and wiring.  I also removed the sill and b-pillar covers to check the wiring.  A few minutes of Google Fu showed that this is potentially a head unit issue.    Switches: Power mirrors don't turn left/right.  I ordered replacement driver's door switches that should arrive tomorrow.  The windows and locks work but it was only about $20 for all of them.  The driver's side rear window switch lets the window down but won't put it back up.  I think the passenger rear doesn't work at all.  In the coming days/weeks, I'll break out my multimeter to check all of that.   Unknown wiring harness: There's a box attached to the front driver's side of the engine compartment, right where the second battery shelf is located.  There are three plugs, one of which looks like it fits a standard headlight-style bulb (9007 or similar).  It doesn't look like it's plugged into anything.  I'll do some digging and if I don't see anything elsewhere on the site, post some pictures here.   Unknown plugs on brake booster: There are at least two female plugs on the brake booster that aren't being used.  I think it might be a replacement/aftermarket, so maybe those are used for a different application, as there don't seem to be any unplugged harnesses and no indicator lights are on.   Little squeaks when turning: Sounds almost like a bushing around the bed of the truck.  I'll have to pay close attention as I get more familiar with the truck.   Clunk on acceleration: possibly the infamous drivetrain clunk.  My 2006 had it and I'm just not familiar enough with this truck yet to fully grasp what it is.   Anyway, my apologies for the vague and all over the place post.  This truck is new to me, and it's been four years since I drove my 2006.  With 200k miles, I know I'll need to learn this truck quickly to avoid having any major issues, despite being confident it's got much more life to it.  My 2006 had nearly 320k on it when I parked it (nearly 300k of which I put on the truck), and it was still drivable then, though I suspected the head gasket might have blown.  I'd hoped to have that truck back by now, but it's gone forever, as I detailed in my reintroduction thread.  
    • lowrider
      Range RA007 DFM Module

      By lowrider · Posted

      I always drive in Sport mode. With more driving, I am finding the initial response when accelerating is much quicker now🖕 Lou
    • Tyler Gibbs
      2022 2500HD with a new RSI SmartCap

      By Tyler Gibbs · Posted

      Is it an optical illusion in the pic or is the truck really squatting that much horribly?
    • fm2176
      It's Been a Long Time...

      By fm2176 · Posted

      My initial introduction was here.  It's hard to believe that I last posted in February 2013, having just deployed to Kyrgyzstan.  Since then, I've retired from the military and the 2006 Sierra SLT Z71 that first brought me to these pages was lost.  I went forward to Afghanistan in March 2013 and did a lot of sitting behind a computer on brigade staff.  Within 18 months of getting back to the States, I was selected for Drill Sergeant duty, after which I moved back to Virginia (my home state and where I served from 2004-2008).  That '06 Sierra did a lot of driving between Louisiana, Georgia, and Virginia, and ended up with nearly 320k miles by 2022.  By then, the registration had been expired for a couple of years, but the pandemic had all but eliminated tickets for such transgressions.  Admittedly too, I usually drove my wife's SUV or son's car the 2-3 times a week I had to report to work.  Teleworking sure was fun while it lasted.   I started my retirement leave four years ago and stored the Sierra at my sister's house.  A big mess was made when her fiancé passed while she was taking care of business out-of-state in late-2024, and his son pretty much mismanaged everything to do with the estate.  Even so, I was assured that my truck was safe... until it wasn't.  I found out that my truck had been scrapped about four months after the son took over everything.  There's nothing I could do; I'm 1000 miles away and it was technically abandoned property since he'd even trespassed my sister from her own house (she had no claim to it as she wasn't married, and the fiancé was the sole owner).     Anyway, today I got my second Sierra.  This is a 2010 SLE 2WB CCSB with a little over 200k miles on it.  It's got the 5.3L I'm familiar with and should handle what I need it for.  Hauling stuff that won't fit in the Transit Connect (yep, I sold out, but that's the wife's vehicle) and towing a few times a year tops.  The price seemed decent, considering how much people sell their trucks for in the Deep South: $4500.  I've seen similar trucks listed for more than double that.  I got it from a coworker who left his tag on until we transfer the title next week (Louisiana requires a notary for transfers), so I've been driving it all day.  The rear speakers don't work, which is one of the things that brought me back to these forums earlier.  I can't say how active I'll be as a poster, but I'll be scouring the archives while I find out every little thing I can about the 2010s and particular nuances/problems with my truck.   It's definitely not a GMC, but I got another Willys Jeep a few months back as well, so I'm almost at the same place I was when I first joined gm-trucks.com.  My old 1960 DJ3A was sold back around 2010 or 2011; my current Jeep is a 1946 CJ2A.  So, I've got a slightly newer GMC and a much older Jeep.  I kind of wish I still had that F-250 I had way back when too.  The Dakota is long gone and was technically my brother's truck, though I had it registered and insured.  The F-250 had to go when my grandmother's house was foreclosed on due to mismanagement around 2012 or so.     Hopefully anyone that made it this far isn't too annoyed.  I tend to be long-winded, but I'll be doing more reading than posting in the coming months.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...