Jump to content

Recommended Posts

Posted
On 4/10/2020 at 2:03 PM, lryfer said:

Is this happening to the 2018 models as well?  I haven't seen that year mentioned. 

 

I used POR-15 in the past on my 66 GTO frame and under the body when it was off.  

Absolutely, yes. 18’s are not immune...I have an 18, I have to undercoat it twice a year to keep it from rusting.

Posted
On 4/13/2020 at 11:23 AM, Doublebase said:

Absolutely, yes. 18’s are not immune...I have an 18, I have to undercoat it twice a year to keep it from rusting.

This is such a pain, I've had 2 Toyotas, both which had the frames replaced for free while out of warranty. Are these frames even available separately or do I just toss the truck when the time comes?

 

From another former LS owner, these things seem like a catastrophe considering the truck is still in warranty and I've got frame rust, on my 2nd rear cam repair, transmission/powertrain issues etc. It's hard to accept then I read what the 8-speed Canyon folks are going through..

Posted
On 4/17/2020 at 12:21 AM, Locom0tive said:

This is such a pain, I've had 2 Toyotas, both which had the frames replaced for free while out of warranty. Are these frames even available separately or do I just toss the truck when the time comes?

 

From another former LS owner, these things seem like a catastrophe considering the truck is still in warranty and I've got frame rust, on my 2nd rear cam repair, transmission/powertrain issues etc. It's hard to accept then I read what the 8-speed Canyon folks are going through..

To be totally honest with you, I think your frame will last at least 15 years even if it does get totally covered in rust. As ugly as these chevy frames end up looking, I've only seen one that needed replacement (rusted through with a hole in it). 

 

Toyota's on the other hand, yeah I have seen quite a few totally destroyed.

 

I just keep up with my frame because I can't stand the sight of frame rust...drives me nuts. I imagine at some point I'll probably tire of keeping up with it, but I figure until then I'm adding years of life to the frame/truck by doing it.   

  • 7 months later...
Posted

What is the consensus of what most are doing to “keep up with” or treat theyre frames. Is the Lanolin fluid film or wool wax right over the existing wax coating the way to go and just deal with what it does the wax. I’ve had my 18 silverado 2 years now and want to do something. From what I gather we could imagine the wax coating as not even being there and treat accordingly?

Posted

I just picked up a 2016 Silverado WT from PA.  I'm in WI, the entire frame was devoid of all the factory wax.  Nothing left.  I went with the Rustoleum Rust Reformer.  Took a wire wheel cone and some wire brushes and got all the loose stuff off and then hit it with the Rust Reformer.  It dried to a nice flat black that was very similar to what the factory coat looked like new.  Definitely need 2 or 3 coats in some spots, it soaks into the rust in heavy areas.  My guess is that I will have to recoat every year, but it appears breathable and it does not have any rubber which should make for an ideal coating.  

 

https://www.rustoleum.com/product-catalog/consumer-brands/stops-rust/rust-reformer

  • Like 1
  • 1 month later...
Posted (edited)

I also use the rust reformer to touch up the rust spots, and then, I hit those spots with Rustoleum Pro Grade undercoating. Boxed frames usually rust through from the inside since they hold moisture and they can’t be re-coated inside. A friend recently had to park his 2000 Silverado due to the frame rusting through from the inside. He had coated the frame with POR15 several years ago. After researching different fluids to prevent rust, I decided to use ATF to coat the inside of my frame and cross members. It’s thin enough to spray without thinning and it appears to contain corrosion inhibitors. From the places it got on the outside of the frame, it seems to wick and spread fairly well which means it should do a good job of coating places not directly sprayed. I used an old bottle of Dexron III that I wasn’t going to use anyway. 

 To spray the ATF, I used a rechargeable sprayer that is pressurized with compressed air. I used a 2 ft spray tube that came with the cans of cavity wax that I sprayed inside my doors, rockers, fenders, tailgate. There are enough holes in the frame that I believe the entire frame is coated inside. The ATF seems to be friendly to the factory coating as I have seen no evidence of it pealing or softening as I’ve heard mentioned from folks using Fluid Film. Time will tell if my small investment in time and money was worth it as I plan to keep this truck for a while. 

4E04E3C5-BCA2-4570-B5A9-9DD8B384746B.jpeg

Edited by HoosierZ
  • 5 months later...
Posted

2018 Sierra, 30K miles - in addition to the rusting frame, which seems to be addressed in a service bulletin, has anyone experienced rear shock rust and color fading? The upper shock is now pink and lower portion is rusted so not very attractive. In quick search, it seems that the frame rust issue is largely cosmetic and involves an isolated # of K2 trucks. Wondering if they are all trucks out of a specific plant or geography? Was even thinking maybe flood/salt water (Hurricane Harvey or similar). Any insight would be appreciated. 

Frame rust.jpg

Frame rust2.jpg

Frame rust3.jpg

Frame rust5 shock.jpg

  • Like 1
  • 3 months later...
Posted
On 6/20/2021 at 1:56 PM, JvanGroup said:

2018 Sierra, 30K miles - in addition to the rusting frame, which seems to be addressed in a service bulletin, has anyone experienced rear shock rust and color fading? The upper shock is now pink and lower portion is rusted so not very attractive. In quick search, it seems that the frame rust issue is largely cosmetic and involves an isolated # of K2 trucks. Wondering if they are all trucks out of a specific plant or geography? Was even thinking maybe flood/salt water (Hurricane Harvey or similar). Any insight would be appreciated. 

Frame rust.jpg

Frame rust2.jpg

Frame rust3.jpg

Frame rust5 shock.jpg

 

You can't stop rust once it's started. Unless you grind it off. 

 

Use rust cure 3000, rust check etc. 

  • 1 month later...
Posted

It wasn’t structurally damaged, looked worse than reality.  The flaking undercoating was the messy part.  I’ll just check it each spring and clean it up.

 

just sucks GM won’t use a durable metal treatment.

  • Like 1
  • 11 months later...
Posted (edited)

2015 Sierra. Original wax coat.  5FC08500-7BFE-4668-9C22-24CAEF1C608F.jpeg

F6F0D845-FFB8-4891-B88C-26AC084D422E.jpeg

DF05FB4D-9D6A-438E-9761-AF51ABB2BD82.jpeg

7833387D-FFD8-493A-93C4-BA30DEE7FB27.jpeg

3B6FA5AB-CD62-4862-A9A5-971FAA470FD2.jpeg

A666A8E8-5D7C-4A0C-80DB-D306B6411E78.jpeg

Edited by K2XX
  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Yep, just a quick reference point.    My main point being I’d do a thousand other things before I’d pay 10k for a transmission.    Speaking in ignorance cause I don’t look at these trucks, what is it worth? 20k?
    • I think users are going to want to pick their monitored parameters, which parameters they want to see first.    It should probably start with baseline at a minimum and adjust to learned, but be able to overlay baseline for comparison.   A simple severity level would be able to determine what type of alerting is appropriate or user selectable.    Why not use the OBD port though?   I think a phone connection would be a good idea, push notifications type deal.   Number 1 issue is having data is useless if you don’t know what the data should be under normal conditions. 
    • I thought I would use your thread and add to it as I just did my first longer drive with my truck in the last couple of days. I drove from the Grande Prairie area of Alberta down to Edmonton and most of where I drove in the city was the ring road so fairly free flowing but a bit of stop and go as well in the city. Stayed the night and returned home and not too many stops along the way each way but every restart and certainly every cold start sets it back for fuel mileage. Why I say that is I see some people will cherry pick a fuel mileage leg after the vehicle had been warmed up driveline wise before hand and its a forgiving ( easy rolling drive leg for example ) and call that their fuel mileage which can give a false perception of reality. I was not heavily loaded at all but never the less the flip bak cover, rubber bed mat, various tools etc and extra jerry cans of fuel all way up to a few hundred pounds of dead weight so its not an empty truck. The cold inflation tire pressures are set more near the freezing point so once they are warmed up driving I was showing 45 front and over 40 rear and realize high inflation pressures would help a little in fuel mileage but certainly not the ride on our crap sections of highway. The weather was good so was not raining as that can really drag mileage down, in fact I had a bit of a tail wind on average driving home. Most people on here would never have driven on that freeway to visualize it but its got a fair bit of rolling type of landscape with numerous river valleys. For the most part I had it on cruise set to 62 although kicking it off if I caught it in time before it started down shifting and self braking going down the grades. Most of the more substantial grades its shifting into 7th I believe as 8th just doesn't have it. Total distance round trip was 643 miles and my overall average and I did refuel three times in all, figured out to 17.65 miles per US gallon. My best fuel mileage section refuel within all of this figured out to 18.46 and these are all hand calculated figures. I find if anything that the trucks computer can be over optimistic, sometimes its pretty close but other times its stretching it. On paper persay in theory the truck would have just about made it on fumes for that whole drive without refueling once.    Which made me think of the topic thread of the wonder if these trucks could do 20 mpg and that is a good question, certainly would have to be on an easy going flat highway, no head wind, the right temperature, not packing around a bunch of dead weight and puttering along even slower than I was I would suspect and going steady and not stopping to smell the flowers or take a piss !. It probably is possible but not without effort to attain that with the wind resistance and weight of these trucks. Of course on my drive most people are passing me if they have the power as per loaded highway tractors, never mind a lot of speedy vehicles but the speed limit is 68 and most are at or well over that. 
    • Monday looks like a good day for the dealer to test an ac issue. Hopefully it all turns out good.
    • Paid $2.72 for E85 today.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...