2014+ K2XX - Center Console Swap / Retrofit - Plug and Play Harness!

[Rfg14silverado]

8 hours ago, polarys425 said:

What parts numbers is that setup?

This is for a cocoa center console with silver trim.  2018 model with wireless charging lid

Edited August 12, 2018 by Rfg14silverado
Added info

[pgamboa]

What parts numbers is that setup?

Keep in mind, there will be many part #s for different color options.

- Black Console vs Cocoa Dune
- Black Leather, White stitchin, red stitching etc.
-Upper tray panel will have like 8-9 different trim color pieces.


Sent from my iPhone using Tapatalk

[polarys425]

36 minutes ago, pgamboa said:

Keep in mind, there will be many part #s for different color options.

- Black Console vs Cocoa Dune
- Black Leather, White stitchin, red stitching etc.
-Upper tray panel will have like 8-9 different trim color pieces.


Sent from my iPhone using Tapatalk

Yeah, finding part numbers seems to be hit and miss. He did state that his is cocoa, and I need black. Even google searching doesn't turn up much, as it always shows me a cocoa result even if I search for black. I'd go to the dealer, but I feel sure it's cheaper to order from one of the websites that sell GM parts.

 

I'd like to have the '18 console in black, with wireless charging, and whatever would have been put in a Z71 trim if any of it was trimmed for a Z71.

[pgamboa]

Yeah, finding part numbers seems to be hit and miss. He did state that his is cocoa, and I need black. Even google searching doesn't turn up much, as it always shows me a cocoa result even if I search for black. I'd go to the dealer, but I feel sure it's cheaper to order from one of the websites that sell GM parts.
 
I'd like to have the '18 console in black, with wireless charging, and whatever would have been put in a Z71 trim if any of it was trimmed for a Z71.

This is the list that someone here provided some time ago. It is apparently for Black, 2018, with wireless charging. I separated and grouped the options based on data I’ve gathered over the last few months.

Hope this helps.

84288042 - Console (Black with Synthesis Trim) - $411.32

Chose the trim of your choice:
84092079 - Upper Tray (Reverse Tartan) - $144.64
84092080 - Upper Tray (Synthesis) - 138.86

Choose the trim of your choice:
23467516 - Side Trim (Black) - $24.01
23467517 - Side Trim (Cocoa) - $23.54
22817347 - Side Trim (Black) - $52.27
22817348 - Side Trim (Cocoa) - $52.27

22776807- Bracket - $14.92
11609982 - Bolts (qty. 2) - $5.96

USB Cables - You only need two, but most get all 3 just in case of a last minute configuration change.
84023215 - $24.80 (Green to Grey)
84022323 - $22.32 (Black to Brown)
19119050 - $22.90 (Black to Grey)

Subtotal $723.02
Shipping $74.31


Sent from my iPhone using Tapatalk

[polarys425]

16 minutes ago, pgamboa said:

This is the list that someone here provided some time ago. It is apparently for Black, 2018, with wireless charging. I separated and grouped the options based on data I’ve gathered over the last few months.

Hope this helps.

84288042 - Console (Black with Synthesis Trim) - $411.32

Chose the trim of your choice:
84092079 - Upper Tray (Reverse Tartan) - $144.64
84092080 - Upper Tray (Synthesis) - 138.86

Choose the trim of your choice:
23467516 - Side Trim (Black) - $24.01
23467517 - Side Trim (Cocoa) - $23.54
22817347 - Side Trim (Black) - $52.27
22817348 - Side Trim (Cocoa) - $52.27

22776807- Bracket - $14.92
11609982 - Bolts (qty. 2) - $5.96

USB Cables - You only need two, but most get all 3 just in case of a last minute configuration change.
84023215 - $24.80 (Green to Grey)
84022323 - $22.32 (Black to Brown)
19119050 - $22.90 (Black to Grey)

Subtotal $723.02
Shipping $74.31


Sent from my iPhone using Tapatalk

HUGE help. Confirms the 84288042 number that I did find, as none of the site show any color details, etc. The Z71 use the reverse tartan, I wonder if there is a separate console number for that to match the upper tray? Any details on the USB cables? Also, the 84023215 usb cable isn't found when I search for it...

 

Thanks for being a HUGE help... I will be ordering your cable when I sort out my parts order and pull the trigger.

[pgamboa]

HUGE help. Confirms the 84288042 number that I did find, as none of the site show any color details, etc. The Z71 use the reverse tartan, I wonder if there is a separate console number for that to match the upper tray? Any details on the USB cables? Also, the 84023215 usb cable isn't found when I search for it...
 
Thanks for being a HUGE help... I will be ordering your cable when I sort out my parts order and pull the trigger.

The upper trays are separate (from my observations) from the console itself.

The Reverse Tartan upper tray will Have the side trim piece as Reverse Tartan and will match the reverse Tartan trim panels on the doors of Z71.

I don’t know if any other differences on the console itself, besides, maybe the cup holder color/outlining.


Sent from my iPhone using Tapatalk

[DESERT DOG]

On 8/5/2018 at 10:15 AM, pgamboa said:

I’d like to correct some info on fitment. I had the opportunity to help a local member who has a 2500, Signal Cab, Long Bed Truck. The fitment was ok. We were able to get the console bolted in... BUT, there is a gap up at the front.

 

My harness build still worked fine, but you can see a small gap up front. I am unsure if there is a center console that is specific to 2500s that might just slightly longer. We also check if there was any play in the 15mm bolts... not enough to close the gap.

 

Here are some pics

 

 

 

 

Sent from my iPhone using Tapatalk

I have recently purchased a 2018 regular cab short box 2wd and would like to install one of these consoles. Has anyone else had this issue in this configuration? 

[pgamboa]

I have recently purchased a 2018 regular cab short box 2wd and would like to install one of these consoles. Has anyone else had this issue in this configuration? 

Will fit all day long. It was just the 2500 HD truck that had a small gap between the front of the console and the dash.


Sent from my iPhone using Tapatalk

[DESERT DOG]

4 minutes ago, pgamboa said:

Will fit all day long. It was just the 2500 HD truck that had a small gap between the front of the console and the dash.


Sent from my iPhone using Tapatalk

Cool, thank you Mr. Gamboa! Will be contacting you soon.

[Mohamad ali]

I finally completed my console on my truck gmc sierra 3500 hd sle regular cab. 

Thank you phil 

Look for more installations ?

 

[Osirus]

Wow so the 3500 HD regular cab fits just fine, too then? I wonder what the deal was with that one 2500 HD?

[Mohamad ali]

10 minutes ago, Osirus said:

Wow so the 3500 HD regular cab fits just fine, too then? I wonder what the deal was with that one 2500 HD?

Same cab to 1500 and 2500hd 

It well fit perfectly. 

[Osirus]

11 minutes ago, Mohamad ali said:

Same cab to 1500 and 2500hd 

It well fit perfectly. 

Someone did a 2500 HD recently and had a 1/2" gap between the console and dash, seems to be the only instance of this happening:

 

https://www.gm-trucks.com/forums/topic/207916-2014-k2xx-center-console-swap-retrofit-plug-and-play-harness/?do=findComment&comment=2136958

[Mohamad ali]

8 minutes ago, Osirus said:

Someone did a 2500 HD recently and had a 1/2" gap between the console and dash, seems to be the only instance of this happening:

 

https://www.gm-trucks.com/forums/topic/207916-2014-k2xx-center-console-swap-retrofit-plug-and-play-harness/?do=findComment&comment=2136958

It should be 3 brackets 

2 uner the console 

1 on the dash 

The one on the dash is responsible for hold the console up 

[Wlay]

BIG …..   Shout out to Phil!     

 

 

Thanks So much I received my harness for my console swap today, plug and play as you told me!  You tube  video is Awesome !!!

 

This is great !!!!!!

 

 

so glad I found your video on you tube !

 

If your thinking about swapping your jump seat for console you need to PM  Phil !!!!! 

 

 

Thanks Again