Search the Community
Showing results for tags 'truck'.
-
So the other day i got in the truck and it was dead. Jumped it and good to go. About 3 days later same thing. Once it started I got in the truck and realized none of the lights were working. Headlights, overhead lights, even the dash lights wouldn’t come on. I’ve learned in the past it usually is the TBC fuse. So I pull it. Bam it’s blown. Easy fix… so I thought. I went to put another fuse in and it blows the second it makes contact. Even 30a fuses blow instantly. I know it goes directly to the BCM on my year model and I’ve inspected wires all over my truck and I cannot find a wire that’s grounding out. I dont know if this is a coincidence but I also noticed that my switch button unlock/lock will locks both sides, but when I hit the unlock it only unlocks the passenger side, and the driver side does not make any noise.. so it’s not even attempting… i’ve checked all the driver lock and unlock fuses, and everything is fine. I even swapped them out just to be safe. I even pulled the door off and check the wires to go to the actuator and everything looked good. The real question is is it a chance that was going on with my locks is causing the same issue with the TBC fuse?
-
Need to find this part
-
Truck started to make a squeaking noise this weekend, took it to the dealership on Monday. Dealership called Tuesday and said that they could not find anything wrong with the truck and that this sound is normal. Take a look at this video so that you can hear and understand what I am talking about. https://youtu.be/aERzjGAX-aU Does this sound normal to you guys? I also put water on the belt and the noise was persistent so it does not appear to be the belt. Any help would be greatly appreciated!
-
What is this haha -
I purchased a 2023 2500hd LTZ DURAMAX in January. Truck drove and handled great until a few days ago. The other day I started feeling the rear end wandering and swaying on me. Anything over 65 is an accident waiting to happen because it can get all over the place. Noticed that if I shake my driver side rear wheel it clicks loudly. Checked lugs and everything else for tightness and everything is tight. Truck now has 25,000 miles it and up until 3 days ago was perfect. Any ideas or insights would be greatly appreciated. Thank you. 20230922_203351_1.mp4 -
I purchased a 2023 2500hd LTZ DURAMAX in January. Truck drove and handled great until a few days ago. The other day I started feeling the rear end wandering and swaying on me. Anything over 65 is an accident waiting to happen because it can get all over the place. Noticed that if I shake my driver side rear wheel it clicks loudly. Checked lugs and everything else for tightness and everything is tight. Truck now has 25,000 miles it and up until 3 days ago was perfect. Any ideas or insights would be greatly appreciated. Thank you. 20230922_203351_1.mp4
-
I had just finished installing my cam and put everything back together but as soon as I go to turn on the truck it won’t turn on it just cranks and a lot of smoke starts coming out of the engine. At first i thought it was some oil that had spilled on the headers or on the block. But i don’t know what to do please help
-
I've been wanting to install longtube headers on my 2007 sierra classic for awhile and now that I've noticed that the OEM exhaust manifold is cracked and one stud is broken I think it's the time to do so. Just wondering what info i should know before doing so. Do I need to have it tuned? I currently have a cold air intake, throttle body spacer and cat back exhaust but that's pretty much it.
-
Hello guys, looking to just level my 2016 chevy silverado z71. Is the best way to do spacers or to do like a bilstein 5100 shocks? Am guessing spacers are the cheaper way. Is there any other options besides belstein shocks? Thanks for any info!
-
Here’s my Walter.
-
Ok, I want to come back to the GMC/Chevy family. For over 20 years, I owned a 98 GMC Suburban, putting over 230k miles on it myself and LOVED the truck. I too owned a 2003 Chevy 1500...put many miles on it too. I am looking at the GMC/Chevy 2500 series diesel trucks. I will stay within the 2016-2019 year range, with about $35k plus'ish budget. I might look at the 2021 trucks, only due to many deals/rebates etc. What suggestions or tips are out there for these trucks? What should I watch out for and/or look at getting? So, a few years ago, I bought a 2015 Ram 1500 4x4 EcoDiesel Lonestar -- well, I have been disappointed with Chrysler/Fiat (FCA). Short story, they lied about the ecodiesel, and after forced recall ECM update, they sucked all performance etc., from the truck. When I had my suburban, I never had so many recalls, been lied to, and never had poor performance. Thanks, for any suggestions that you will provide. Gary -
36B63D94-08A9-4168-83C1-F6D4AC5A1D7F
Scott Kramer posted a gallery image in Black Truck Club's Black Truck Gallery
my 2017 gmc after crashing -
How many miles to get out of a 14 Sierra slt 4x4 5.3L? Currently 118k , try to take best care as much as possible
-
Does anyone know how to turn off the seatbelt chime in a 2016 GMC Sierra truck. and please don't say buckle your seat belt. Thanks.
-
I have a 2006 GMC Sierra 1500 4x4. A/c has been out for over 2 years had a bad compressor never got around to fixing it. Today I replaced the compressor, condenser, accumulator, orifice tube, and flushed all lines. Took it up to my buddy at the dealership and we charged it up. Put it under vacuum for a bit and no leaks. Drove home about 12 miles no problems blew ice cold. Left to go to the store about 2 hours later started it up the ac button was on but clutch wasn’t engaged and ac blowing warm. Turned the button off then back on clutch engaged and blew ice cold. About 10-15 seconds clutch disengages blows hot cycle the button again blows cold again. Every 10 seconds or so it blows hot and I have to cycle the ac button on the dash again get cold air. I know the compressor clutch should cycle on and off that’s normal but I don’t think it should be that frequent and you shouldn’t feel that significant of a temperature change right? And when it cycles off it doesn’t come back on unless you cycle the button. I’m thinking a issue with the low pressure switch on the accumulator but any advice?
-
Hello everyone. I've been looking for a raptor style grille for my '14 silverado 1500. I see ones online that I like but I can only find them for the 16-18 models. They have the 3 amber led's on top and "CHEVROLET" fairly large across the middle. For these, you can find them for 120-175 dollars. The only raptor style grills I've found for the 14-15 chevy have the amber lights but no chevrolet across the front. I've also seen grills with chevrolet across the front but don't have any lights AND they cost 500-700 dollars and at that point, I would just stick to the stock grill. Anyone have any ideas on where I could find this? or ways that I could maybe buy the blank grill with the lights and buy lettering somewhere separately and somehow attach them to the grill? I've attached 3 pictures. The first one is what I want but it's not the right year. Second is what I can find for my year and 3rd is the one with no lights, but has lettering across middle for 600 dollars. Any advice would be awesome!
-
First post, new user here! Got out of my first pickup in 2015 due to the Oil crash in Alberta Canada, things are looking better and im getting into a 2020 GMC sierra 1500 elevation crew cab, short box with X31 package. Got a great price on the truck along with 0% financing. GM has a lot of factory accessories that can be added to their trucks. Im for sure going to get the flush fit box cover. Any advise on other upgrades to do right away would be appreciated!! Thanks, Looch
-
Hi, I have 2 questions. One, I want to do the HD Front end conversion on my 2007 NNBS Silverado1500. I know what I need, and I have decided on the 2011-2013 HD grill and bumper. I have gone on line and seen some people go with the 2007-2010 HD hood and some people go with the 2011-2013 HD hood. Would any one know the difference or if one fits better onto the 1500 truck? And does anyone know how to install the bumper? And the second question was, How can I convert the truck into full electric mode? I have manual windows and no power locks. My truck is extended cab and I would wish for the back windows to work as well. Or does anyone have a really good video on what parts I need and how to do it step by step? I am by no means a mechanic but i do work on my trucks here and there on small things. Thanks in advanced! -
I just bought a 1991 Chevy C70 Kodiak C7H042 6.6L 403 CUI Diesel in amazingly great condition. I am now the 3rd owner of this dump truck. The first owner took great care of the vehicle, everything thing appears to be well maintained and no shade tree work. All the parts, wiring and accessories appear to be original and well maintained. However, the second owner bought this truck and never used it. It has sat in a field for about four years. To get to the point, I completely serviced the truck and replaced the batteries, checked the fuses, grounds, relays and I have absolutely no power to the truck. No interior or exterior lights and no lights on the instrument panel. What could be the issue?
-
I have a 2005 Silverado with the single cab. I was curious if I could take the standard center seat, that does not swing down. And swap it out with jump seat that does swing down (found in ext/crew cabs), in to my single cab? I'm looking to gain that armrest and simple storage on top. I have a subwoofer box behind the seats now and want to make sure it fits and all.
-
Hello, im currently in the market for a new (to me) truck. I have a little girl, and a fiancee. Ive looked at many truck for sale. The biggest features im looking for is, 4door, leveling kit, tint, somewhat low miles, wheels and tires are a plus, but not nessicary, and well maintained. I know truck pricing in general is pretty high nowadays. But i made this forum to ask, what would a good price be for a Silverado between 2014-2016 be? Thabks in advance
-
Hello brothers and sisters. This is my first forum post. Just wanted to make this so you can show off ur 2019 5.3 Denali and give me some ideas what to do to mine? This is my truck as of right now. Only thing I’ve added was a magnaflow muffler but it’s a bit too stock sounding thinking about going for the muffler delete entirely. Anyways please share what you’ve done to ur 5.3 Sierra
-
I recently acquired a 1951 Chevrolet 6100 missing its engine and would like to refurbish it. However, Instead of putting in the original engine (Chevrolet 235) I am looking for an engine that came out in the next 10-15 years to put in my truck that will out put 200+ horsepower without being out of touch with the truck. Any advice would be greatly appreciated.
-
My 95 Chevy quit while I was plowing. I went to start it back up and it just does 1 click and nothing. I’ve tried jump starting it, charging the battery, following all wires, and removing and cleaning terminals, anyone have any suggestions. I’ve been at this for 2 days
-
My 95 Chevy quit while I was plowing. I went to start it back up and it just does 1 click and nothing. I’ve tried jump starting it, charging the battery, following all wires, and removing and cleaning terminals, anyone have any suggestions. I’ve been at this for 2 days
