Jump to content

Recommended Posts

Posted

No way would I ever trade in this vehicle (or any vehicle for that matter). I too got a great deal on my XL Denali. I also received a decent "we are sorry for all of the shop time" payment from GM along with a healthy accessories credit (that I was going to spend anyway). I made it very clear that that was for issues to this point and that I still expected them to work to solve the vibration and buffeting. Unlike some, I am not dropping off my truck and letting it sit there until I see some type of traction being made here (like the two links showing the vibration fix for tires and drivetrain...They are working with me as best they can and because there is NOTHING that remotely comes close to this vehicle in comparison, I am sucking it up and hoping for a fix. Caveat - had a purchased this vehicle and not leased it I would have walked away after the first two weeks of troubles.

 

Walking away is probably easier BECAUSE you have a lease right? I leased mine last week, and already told the salesman I would be exchanging it/making them buy out the lease if it doesn't get fixed. I'll go buy another Tundra, I don't really care.

  • Like 1
Posted

Now that some 2016 models are on the lots, I'm really interested to hear some test drive reports to see if this vibration is still present. I know the main change is the cosmetic front end but all manufacturers have engineering change orders they introduce during the manufacturing process to fix problems that have been identified and most of these ECOs are never publicly acknowledged so I'm just curious if they made some attempt to address this problem in the 2016s. If the 2016s still vibrate like the 14s and 15s, then that tells me either they genuinely don't know the root cause(s) and the complete and final remedy or it's something in this current design that they can't reasonably or economically fix.

Posted

No way would I ever trade in this vehicle (or any vehicle for that matter). I too got a great deal on my XL Denali. I also received a decent "we are sorry for all of the shop time" payment from GM along with a healthy accessories credit (that I was going to spend anyway). I made it very clear that that was for issues to this point and that I still expected them to work to solve the vibration and buffeting. Unlike some, I am not dropping off my truck and letting it sit there until I see some type of traction being made here (like the two links showing the vibration fix for tires and drivetrain...They are working with me as best they can and because there is NOTHING that remotely comes close to this vehicle in comparison, I am sucking it up and hoping for a fix. Caveat - had a purchased this vehicle and not leased it I would have walked away after the first two weeks of troubles.

I got a great deal on mine also and if my truck thats been at the dealer does get fixed ( I'm not optimistic ) I will be on the horn with GM for a refund for the 5 weeks I have not had it and the aggrivation....if its not fixed I have to start the buyback / lemon law process
Posted

At the dealership today. They asked if my truck had a shake. I surprisingly said YES!! they proceeded to tell me there is a recall with a transfer case update. Anyone hear of this? I scrolled back a few pages but didn't see it. Goes in tomorrow for the hopeful fix!

Posted

At the dealership today. They asked if my truck had a shake. I surprisingly said YES!! they proceeded to tell me there is a recall with a transfer case update. Anyone hear of this? I scrolled back a few pages but didn't see it. Goes in tomorrow for the hopeful fix!

What vehicle do you drive.?

 

Sent from my SG Note 4 on Tapatalk

Posted

If it's the same I just had the transfer case recall done on my 15 6.2 LTZ and it's a reprogram to the tccm for cold weather operation of the 4 wheel drive system. Shouldn't have anything to do with vibrating.

 

Sent from my potato

Posted

I drive a 15 Sierra Denali 5.3L, had recall work done, believe it was the 4 wheel drive during cold weather reprogram..

 

Sent from my SG Note 4 on Tapatalk

Posted

/profile/6563-daveo/?do=hovercard" data-mentionid="6563" rel="">@DaveO

 

I have a $50k shaker.. I won't bore you with my problems.. New approach is I'm taking my truck to an auto expert for a complete vibration evaluation. Once they find the solution, I'll give GM one more shot to try and fix this POG. I'm half expecting the rear diff is the problem so first order is pop the cover and check the gears and backlash.

 

Might be less expensive for me to pay for the repairs than taking a $5-10k hit and trading it in for another brand.

 

I'm in the manufacturing business and have been involved in "Silent Recalls". I believe GM is well aware of the issue but the cost benefit analysis doesn't warrant a recall. Nobody had died yet from a shaky truck (but I'm having chest pains). They are spending most of their time dealing with ignition switch crashes and deaths so no help for the idiots that purchased a shaker.

Posted

/profile/6563-daveo/?do=hovercard" data-mentionid="6563" rel="">@DaveO

 

I have a $50k shaker.. I won't bore you with my problems.. New approach is I'm taking my truck to an auto expert for a complete vibration evaluation. Once they find the solution, I'll give GM one more shot to try and fix this POG. I'm half expecting the rear diff is the problem so first order is pop the cover and check the gears and backlash.

 

Might be less expensive for me to pay for the repairs than taking a $5-10k hit and trading it in for another brand.

 

I'm in the manufacturing business and have been involved in "Silent Recalls". I believe GM is well aware of the issue but the cost benefit analysis doesn't warrant a recall. Nobody had died yet from a shaky truck (but I'm having chest pains). They are spending most of their time dealing with ignition switch crashes and deaths so no help for the idiots that purchased a shaker.

I agree....being nobody's dying from a shaker they expect us to just deal with it
Posted

/profile/6563-daveo/?do=hovercard" data-mentionid="6563" rel="">@DaveO

 

I have a $50k shaker.. I won't bore you with my problems.. New approach is I'm taking my truck to an auto expert for a complete vibration evaluation. Once they find the solution, I'll give GM one more shot to try and fix this POG. I'm half expecting the rear diff is the problem so first order is pop the cover and check the gears and backlash.

 

Might be less expensive for me to pay for the repairs than taking a $5-10k hit and trading it in for another brand.

 

I'm in the manufacturing business and have been involved in "Silent Recalls". I believe GM is well aware of the issue but the cost benefit analysis doesn't warrant a recall. Nobody had died yet from a shaky truck (but I'm having chest pains). They are spending most of their time dealing with ignition switch crashes and deaths so no help for the idiots that purchased a shaker.

Make sure you have them check the pinion preload.

Posted

Set an appointment up at dealer last night for steering wheel resonance vibration.

 

Was lucky enough to meet another guy there with a vibrating Silverado, he filed lemon law so GM engineering was all over his truck.

 

He said that GM was going to put new tires on it, I laughed and said good luck.

 

I enlightened him on the 420 page forum, where GM has replaced shocks, tires, rims, driveshafts, axles, rear ends, shimmed motor mounts, found preloads on bearings incorrect, etc.

 

He was speechless

  • Like 3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • First off pay close attention to what Newdude pasted as he is a GM tech !.    I have a couple of questions which might cross off some questions others on this forum would be wondering about as well. So when was the engine oil changed prior to this trip, was it almost brand new oil or did it already have a fair bit of use on it before you started the trip.   Did you check the oil level on flat ground and was it at the full mark just before leaving on this trip which I gather from google map is about 700 miles or so. Why I ask and this is not the first time in history that has happened, that either a dealer or some other shop changed the oil on the vehicle and the vehicle left the shop and the owner ( you ) assumed the engine oil was full but in reality the person who changed the oil simply did not put enough oil into the engine .. it happens !. Also that a shop put the wrong viscosity oil in and an engine was not happy with that thinner viscosity and oil got past the rings at a higher rate than the proper viscosity. Not to mention if there was any leaking out of a drain plug or the filter gasket etc. 
    • You could, although in the end it really doesn't make much difference what comes out in exact terms since it comes down to putting enough back in so that there is enough volume so that something flows back out once the trans is up to temp for the check procedure. I presume your putting a pan on that has a drain plug but its probably the same pan mold/size as at least a while back no extra volume pan was made for the gas truck version due to the exhaust cross over pipe issue. All I can say as per volume I put back in and this was based on changing out the filter as some is trapped in it that does not come out until its removed because of the way its made inside and my truck had sat over night with the trans having been hot when shut down and dripping internally before I pulled the pan. I went off of what the trans shop suggested as a minimum volume he found worked which was 9 1/2 quarts and I had enough flow out of the stand pipe that I knew I was right on the money once it slowed to a dribble and never wasted hardly any oil but it would be totally fine to throw in a full 10 quarts too. I guess personally I wouldn't ruin a perfectly good pan by drilling a hole in it, not with the cost of replacement pans up here or the dorman one anyway with the drain was 500.00 when I priced one out a while back, totally stupid.    I might not have said before but this trans oil type really expands with heat and I think its been said on this forum and the trans shop said the same so I wanted to try and hit the lower temp of the range vs at the top or go shooting above it as that would allow more oil to flow out which wouldn't be ideal. 
    • Since I am going to be replacing the pan, I am just going to drill a hole in the original to drain it so I will be able to catch the fluid easier and measure how much I took out.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...