Jump to content

Recommended Posts

Posted

Last week I had 4 new Michelin Defender LTX M/S tires installed. After few days driving I am happy to report that most of the vibration is gone. There is a small intermittent vib at around 125kph.

These tires are phenomenal.

Posted

Hello,

 

My name is Tim Esterdahl and I'm a freelance automotive journalist working on a story for Pickuptrucks.com. Search my name and you will see it is legit. I'm hoping to find someone I can talk to in detail about this issue who recently purchased a new truck. A 2016 would be great, but a 2015 would be OK as well.

 

I realize this is a bit of a "dead horse" on this forum after scanning some other threads and I certainly don't aim to offend anyone. Instead, I'd like to collect some information and run a story educating consumers on this potential issue.

 

If you are interested in sharing your story, please contact me here or at tim @ tecreativeservices.com.

 

I'll also be in the 1962 Chevy threads since I'm currently working on mine. :)

 

-Tim

  • Like 7
Posted

Last week I had 4 new Michelin Defender LTX M/S tires installed. After few days driving I am happy to report that most of the vibration is gone. There is a small intermittent vib at around 125kph.

These tires are phenomenal.

Are those the 20 inch rims you had the tires mounted on? I couldn't find defenders in 18 inch, so I just had the LTX MS2 tires installed. Two had to be replaced after 200 miles due to highway vibration. They were 16 and 19 lbs on the rfb. I picked it up today and the highest measurement was 10lbs with a greatly improved ride. They tech was helpful in that he went by the GM vibration diag sheet for balancing tires and tested them on two of the shops balancers to make sure all the numbers were the same. I am waiting two months, including an 1800 mile trip before putting bilsteins on the front. That way if it returns, back to the dealer I go.

Posted

Hello,

 

My name is Tim Esterdahl and I'm a freelance automotive journalist working on a story for Pickuptrucks.com. Search my name and you will see it is legit. I'm hoping to find someone I can talk to in detail about this issue who recently purchased a new truck. A 2016 would be great, but a 2015 would be OK as well.

 

I realize this is a bit of a "dead horse" on this forum after scanning some other threads and I certainly don't aim to offend anyone. Instead, I'd like to collect some information and run a story educating consumers on this potential issue.

 

If you are interested in sharing your story, please contact me here or at tim @ tecreativeservices.com.

 

I'll also be in the 1962 Chevy threads since I'm currently working on mine. :)

 

-Tim

Hi Tim,

 

It's not beating a dead horse. I am sure today, someone signed papers for a new truck and has or will have this vibration problem. There are many people on here who can help you out with your information request. Right now, GM is the absolute, best sales person for the Ford, Toyota, Dodge and whoever else truck lines.

 

All manufacturers have problems. The best ones stand behind getting the problem corrected and making sure the customer is taken care of. GM is turning their back on so many customers and service departments are not getting paid what they have in the repair time, so they give up on the customer. Statements like "It's normal" "Within specification" "They all do it" instead of working with the customer and GM to identify and resolve the issues. I was told by a tech this week that it's a truck, it's going to vibrate. Well, I looked through the Silverado marketing material and phrases like "Highly refined and precisely tuned to help squelch vibration for a smoother ride". They should not market this truck as anything related to being comfortable on the highway. It is unreasonable to keep a customer vehicle while the dealership and GM communicate back and forth for diagnostics. My truck was at the dealer for over three weeks. Most days I would stop by and it had not moved in their parking lot and I confirmed no work was performed.

 

I have always owned GM vehicles, started when I was fourteen (1989) and paid more attention to color and option packages than what the competition had to offer. My 2015 Silverado has changed all of that for me. I save extra money with the full intention of eventually getting rid of this truck and moving to another manufacturer. Gone are my days of trusting anything GM has to say or offer.

 

Best of luck with your information gathering:)

  • Like 2
Posted

Well I got a call from my dealer tonight, they decided tot replace the radio, but could do nothing further for the vibration because the truck is within GM's bullshit spec. I'm picking it up tomorrow, I'll update you all on how it is. Likely going to file lemon law.

Posted

Are those the 20 inch rims you had the tires mounted on?

My rims are 22"
Posted

My rims are 22"

I had called Michelin to see if and when they were going to make the defender in 18s and they only carry it in the smaller 18 inch, I believe for the tacoma size and a few others. No current plans for 265, 275/65/18. I have a friend who put the 20" defenders on his f150 and was very impressed with them as well.

  • Like 1
Posted

Why aren't they recalling all these trucks for crappy seat frames as well?

Because like the "Chevy Shake", GM does not consider crappy seat frame a safety issue. It's simply a $ issue.

Posted

I have a 2015 sierra. the carbon fiber edition with the 22" wheels with 285/45R22. I noticed a pretty good vibration between 70 and 75. I also took it in and had them look at it. Nothing they could do. Service told me that it could be a tire or wheel not balanced completely but the wheel balancer would not get to highway speeds. Owner of the dealership was trying to get with GM and see how they could resolve the issue. Since then, I have purchased a leveling kit and Nitto 305/45R22's and it still does the same. The ride is a little smoother especially over bumps but the vibration is still there.

Posted

Well I picked up my truck again today after they finally replaced the radio.....IT STILL DOESN'T F*CKING WORK, I LOST ALL THE HIGHS AND THE VOLUME FADED BEFORE I WAS EVEN OUT OF THE PARKING LOT.....

 

I'm calling GM and basically telling them I have just picked my truck up from it's 5th repair attempt, and I'm done f*ucking around with this. They now have 2 options, they can buy it back on their own, or I'm filing lemon law, and will bring multiple other suits for fraud should I have to go that route.

 

I'm DONE with this Bullsh*t

  • Like 3
Posted

The issue is that GM is selling thousands of trucks. Thousands. There are like what, 20 of us here actively participating that have an actual vibration NOT caused by the wheels or tires? GM or any business out there will take those odds every time. People don't come to forums because they have no issues with their cars, they come here to find solutions. Unfortunately for us, there aren't enough people out there pushing the issue for it to be a cost benefit to GM to put time into fixing these trucks. They don't care. They are still selling trucks, and flooding the market so our trade-in values aren't shit, and they could not care less. GM isn't stupid, they know lemon law is too much hassle for most, they know they'll win most of the time anyways, and by offering $3500 in trade allowance, most of the dubs who buy these piles of shit think they won and will trade in for another pile of shit in a different color. There are too many retards out there who are brand loyal to their sisters, cousins and GM in order to get any of this fixed, and all it does is **** us, who actually care...

  • Like 2
Posted

Pull the bandaid and get on with your life Jesse, life it too short to mess around with a bs company like GM. I get it, i know not everyone can't afford to just walk away and lose thousands of dollars but that is what the Lemon Law protection is there for. Use it and get your life back.

  • Like 3
Posted

Pull the bandaid and get on with your life Jesse, life it too short to mess around with a bs company like GM. I get it, i know not everyone can't afford to just walk away and lose thousands of dollars but that is what the Lemon Law protection is there for. Use it and get your life back.

thats what I'm doing, I'm calling tomorrow

  • Like 1
Posted

Because like the "Chevy Shake", GM does not consider crappy seat frame a safety issue. It's simply a $ issue.

If a few broke in half in a collision and people got seriously hurt as a result, they would.

  • Like 1
Posted

The issue is that GM is selling thousands of trucks. Thousands. There are like what, 20 of us here actively participating that have an actual vibration NOT caused by the wheels or tires? GM or any business out there will take those odds every time. People don't come to forums because they have no issues with their cars, they come here to find solutions. Unfortunately for us, there aren't enough people out there pushing the issue for it to be a cost benefit to GM to put time into fixing these trucks. They don't care. They are still selling trucks, and flooding the market so our trade-in values aren't shit, and they could not care less. GM isn't stupid, they know lemon law is too much hassle for most, they know they'll win most of the time anyways, and by offering $3500 in trade allowance, most of the dubs who buy these piles of shit think they won and will trade in for another pile of shit in a different color. There are too many retards out there who are brand loyal to their sisters, cousins and GM in order to get any of this fixed, and all it does is **** us, who actually care...

I can say that in the last couple weeks alone, I've been at my new dealer 7 times, and 3 of those times someone came in because of the vibration, and 2 times they had someone calling in about it. Don't know if any of them are related, picking it up today someone was calling in about the same radio issues I have....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Sad thing is that this doesn't have to be the case. LSPI can be solved without a reduction in TBN. Swap Ca for Mg.  Cats are not a issue if the OEM can get a ring and valve guide seal even at SN levels of SAPS. Dizzy is purring like a kitten with a bowl of warm milk. 200K of Full SAPS oil and zero detonation issues and nice a clean inside and out. This shouldn't be an issue. It isn't 1920.    Tell ya what AMSOIL SS is excellent at, internal cleanliness. The new formula is even a step up from their already outstanding cleanliness levels. Can't say the OEM offering is quite that clean. There marketing suggest the SS is cleaner.     That is the only defense with at shelf oil. Nothing wrong with them if you ignore the marketing and OEM 'recommended' OCI and use a thimble full of common sense. 😉 You go sir. 
    • I started with a folding cover by BAK PAC on my 2500. It went bad after close to 5 years. Bent and vinyl coming loose. Contacted BAK and they gave me a very good discount on a Revolver. Had it a number of years. Mostly outdoor storage. Some garage storage. Vinyl started to come loose. Still under warranty so they replaced to cover. Sold the 2500, bought the 1500 and got another revolver for it. Had it a couple years now and no issues. I store it indoors. Got a bit of discount when buying it as well. If you are seeing problems, contact BAK or real truck and let them know. Customer service was pretty good. But I think they changed their warranty.
    • I agree, there is no one answer fits all as every rig is different, one may be pulling some little aluminum fishing boat while another is towing a monstrosity that weighs a lot and hopefully the owner if the rig has some prior experience to know what drive mode they should choose.    It also struck me and this is from watching a few of those boat ramp escapades videos in the past, Ford being one of the vehicles that has the auto front axle hubs and sure enough its found out that one hub has crapped out and won't engage and may not have manual hubs to even select on both sides so they are on the boat ramp stuck with no four wheel drive and spinning .... they flat out need a tow to get up the ramp and deal with the vehicles new found issues. That can happen to all brands of pickup, finding out either four wheel drive or 4 low isn't working right at the time its needed it to work as some electronic crap has failed. 
    • Its possible you never had the joy of the crappy boat launches we tend to have around here or really some of them are just grades down to the river if its a river scenario and the conditions change all the time with the river levels and silt deposits. Some of the lakes we went to years ago, there was no such thing as a cement pad that went down into the water that the trailer stayed on, it was gravel maybe up to the water line and then duck crap much beyond that so sinking the boat tires into mud. Of course some of the more established lakes had a cement bar type boat ramp but sometimes it was covered in green slime closer and certainly within the water and a two wheel drive had all sorts of fun if one had to touch that slime with the rear tires.    A neighbor of mine had made a comment years back with his chev truck that was probably about the same year as yours but a half ton extended cab 4x4 and he a a fiberglass boat with an inboard so it wasn't a feather weight and he had gone out to one of the large popular lakes in the area and don't ask me how this happened but he was in two wheel drive as he figured he didn't require four wheel drive for that boat ramp and somehow upon pulling the boat out he twisted one of his drive axles. I suspect it must have spun and then grabbed on the cement ramp and shocked it to the degree of twisting it. He would have had the standard 8.5 or whatever it was axle housing as the 9.5 ring gear like my truck has also has larger drive axles as far as I know. Anyway he was feeling a vibration driving home and had it checked out and a shop found that the tire/hub was wobbling because of the axle had twisted so in went a new drive axle. After that bad experience he said he made sure to put it into four wheel drive to lower the stress on the rear axle. Of course that is where an HD truck can handle a lot more stress and no doubt these newer half tons with their larger ring gears probably have larger drive axles as well to match vs back in the day. 
    • Desirable - as in does someone WANT one, aspire to have one. Could reasonably buy any car they want and CHOOSE these instead.    I didn't watch the video, why did they win?
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...