Jump to content

Recommended Posts

Posted

Guys,

 

 

Relating to the vibration issues many have, years ago I was taught that vibrations felt in the steering wheel were tire and wheel issues and vibrations felt in your driver's seat and / or butt were suspension issues. Does that still hold true today?

Posted

Well, as someone here guessed it, the bad vibrations are back. Going tonight to trade this piece of shit in on a 2500HD, hopefully. Going to a different dealership as well because I am tired of driving an hour plus every week for a shake that noone seems to have figured out.

Posted (edited)

So weirdest thing happened to me this morning. NO VIBRATION!! I haven't changed anything. Simply was driving home from work on the highway waiting for my steering wheel and console to start shaking and I was up over 80 mph and nothing. Smooth as glass. This is probably short lived but I don't know how it's possible. Maybe in my case it is these crappy tires? I bet everyone I passed on the highway thought I was a lunatic, smiling from ear to ear.

Edited by Schmidt152
Posted

Eight days later, I got my truck back with three new tires. It is much better, but not perfect. I hope it lasts.

Posted (edited)

Well that was short lived. Shimmy from 35-50 is back

 

Same thing has happened to me and my '16 Silverado, twice. Mystery....just plain fk'n weird.

 

 

Edit in;;; My nephew called me to shoot the shit, and said he's in the market for a new truck, said he really likes the Chevy's, and asked me how I liked my '16 Silverado Z71. I told him that it's a damn purdy fire engine red, the 5.3 is plenty adequate, it sifts smooth, and the seats are real comfy. And added that, sometimes it's not really all that pleasurable to drive due to the vibration and BS that goes along with it. He'll be looking at other brands, unless he finds a '13 1500 or older in real good condition.

 

As far as their trucks are concerned, GM is shooting themselves in the foot one buyer at a time.

Edited by Willyone
Posted (edited)

Well, as someone here guessed it, the bad vibrations are back. Going tonight to trade this piece of shit in on a 2500HD, hopefully. Going to a different dealership as well because I am tired of driving an hour plus every week for a shake that noone seems to have figured out.

 

Oh it wasn't a guess. Those of us who have been at this for 3 years have seen and heard it all.

 

Happy New Years everyone. Now get out of your trucks and go vibrate in much more fun ways lol

Edited by C6Bill
  • Like 2
Posted

 

Same thing has happened to me and my '16 Silverado, twice. Mystery....just plain fk'n weird.

 

 

Edit in;;; My nephew called me to shoot the shit, and said he's in the market for a new truck, said he really likes the Chevy's, and asked me how I liked my '16 Silverado Z71. I told him that it's a damn purdy fire engine red, the 5.3 is plenty adequate, it sifts smooth, and the seats are real comfy. And added that, sometimes it's not really all that pleasurable to drive due to the vibration and BS that goes along with it. He'll be looking at other brands, unless he finds a '13 1500 or older in real good condition.

 

As far as their trucks are concerned, GM is shooting themselves in the foot one buyer at a time.

 

Loyal Silverado owner since 93. Just bought a one owner 2013 short bed reg cab Z71 with 26k miles from an older prior owner. The price was below book and pretty sure it will be my last GM after this screwing they are laying on owners. I could have had a new Silverado with huge rebates as you all know but I don't trust them or their new trucks and yes...this will cost them over time

Selling my 06 ext cab if anyone is interested. In Mass near CT border.

 

 

Sent from my iPhone using Tapatalk

Posted

Not necessarily. My driveshaft was not true from factory like the video above and my truck vibrated between 60-70 mph.

 

RT

 

This is my next step, still having issues in the 65-75 range, and I have a whole new ring and pinion setup. I need to shorten my driveshaft anyways as I have one of those awkward ones that are a bit on the longer side. For what I have spent on this truck so far $450 for a custom drive shaft is a drop in the bucket to fix this issue. Hope to have it in in the next few weeks and will report back. Driveshaft and Axles are the only rotating parts after the transmission I haven't replaced yet.

Posted

First post, after reading most of this thread: Purchased 2016 crewcab, 6.5' bed, 6.2L w/ 3.23's in September.

Came with 22's. Noticed shaking at 73 mph+ on drive home from dealer in Montana (I live in WA state, but found what I wanted in MT, a 6.2 LTZ w/ the 40-20-40 front seat to accommodate kidlets).

Took a video of the shaking water bottle (like we've seen so much of on Youtube) and sent it to my salesman-- he said take it in to my local dealer. I figured it was the wheels, and since I planned on replacing them I held off on going to the dealer.

Got the wheels replaced with 18's a couple weeks after purchase, with Gear rims and Michelin Defenders (LT 275's) and guess what-- the shake remained.

Took it into my local dealer, explained the symptoms in great detail, brought in a copy of the service bulletin, and even provided the video I took. Picked it up a few days later-- they had let some air out of my tires, folded up my tonneau cover, and said "it's much better."

It wasn't.

Went back, and got the "it's a truck, they all do that. In fact we drove two others on the lot, and yours is better."

I told them this was unacceptable, so they had me come back in and they did the Pico test. They also ran the test with a different set of wheels, and according to the readout (which they provided a copy of) it was better, conveniently within spec, with the different wheels ( a set of 20's with Continental P tires that they had taken off a new truck).

I took my wheels back to the tire shop, and they did a balance, then a RFB, neither of which produced a discernible change.

Back to the dealer with a request to drive the truck with the 20" Continentals. It seemed a little better initially, perhaps due to the fact that they're P tires and not LT's. But there's still a vibration, though like many, it's somewhat intermittent.

 

So now what??? I asked the service manager to do the tests they line out in the service bulletin, but he said the first thing Chevy asks is if they've done the pico test, and if it's within spec, they won't authorize any more work.

I've called GM direct, much to the chagrin of my dealer, and have a case number going. I'm going to press for doing the tests on the drive shaft, ring and pinion, etc-- we'll see.

I understand the dealer is under GM's thumb, but it really pisses me off when they pass it off saying they all do it because the frame is so stiff.

 

My questions: Has anyone put airbags on the rear suspension? I understand this would only mask the symptoms, but I'm okay with that. I thought about the Sulastic shackles, but I believe Abominable tried that to no avail.

Has anyone tried different struts (or whatever they are) in the front? Again, masking the symptoms, but I'd take it.

I'm struggling with the notion that LT's would be worse than the P tires-- it seems the stiffer tire would simply transfer more road roughness, but anything originating from the truck wouldn't be affected. Maybe the slightly rougher ride from the LT's would just make the vibration seem worse.

 

Any help is appreciated-- I've never been more excited and then disappointed in a purchase!!

Posted

First post, after reading most of this thread: Purchased 2016 crewcab, 6.5' bed, 6.2L w/ 3.23's in September.

Came with 22's. Noticed shaking at 73 mph+ on drive home from dealer in Montana (I live in WA state, but found what I wanted in MT, a 6.2 LTZ w/ the 40-20-40 front seat to accommodate kidlets).

Took a video of the shaking water bottle (like we've seen so much of on Youtube) and sent it to my salesman-- he said take it in to my local dealer. I figured it was the wheels, and since I planned on replacing them I held off on going to the dealer.

Got the wheels replaced with 18's a couple weeks after purchase, with Gear rims and Michelin Defenders (LT 275's) and guess what-- the shake remained.

Took it into my local dealer, explained the symptoms in great detail, brought in a copy of the service bulletin, and even provided the video I took. Picked it up a few days later-- they had let some air out of my tires, folded up my tonneau cover, and said "it's much better."

It wasn't.

Went back, and got the "it's a truck, they all do that. In fact we drove two others on the lot, and yours is better."

I told them this was unacceptable, so they had me come back in and they did the Pico test. They also ran the test with a different set of wheels, and according to the readout (which they provided a copy of) it was better, conveniently within spec, with the different wheels ( a set of 20's with Continental P tires that they had taken off a new truck).

I took my wheels back to the tire shop, and they did a balance, then a RFB, neither of which produced a discernible change.

Back to the dealer with a request to drive the truck with the 20" Continentals. It seemed a little better initially, perhaps due to the fact that they're P tires and not LT's. But there's still a vibration, though like many, it's somewhat intermittent.

 

So now what??? I asked the service manager to do the tests they line out in the service bulletin, but he said the first thing Chevy asks is if they've done the pico test, and if it's within spec, they won't authorize any more work.

I've called GM direct, much to the chagrin of my dealer, and have a case number going. I'm going to press for doing the tests on the drive shaft, ring and pinion, etc-- we'll see.

I understand the dealer is under GM's thumb, but it really pisses me off when they pass it off saying they all do it because the frame is so stiff.

 

My questions: Has anyone put airbags on the rear suspension? I understand this would only mask the symptoms, but I'm okay with that. I thought about the Sulastic shackles, but I believe Abominable tried that to no avail.

Has anyone tried different struts (or whatever they are) in the front? Again, masking the symptoms, but I'd take it.

I'm struggling with the notion that LT's would be worse than the P tires-- it seems the stiffer tire would simply transfer more road roughness, but anything originating from the truck wouldn't be affected. Maybe the slightly rougher ride from the LT's would just make the vibration seem worse.

 

Any help is appreciated-- I've never been more excited and then disappointed in a purchase!!

I have airbags and NO CHANGE AT ALL. New struts and nothing. I have add a leafs and didn't change at all. Most guys have fixed the problem with mostly hard part's. IE driveline ring and pinions. Or whole rear axles. Just saying.

 

Sent from my Pixel XL using Tapatalk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Its coolant disguised as oil.   TSB 20-NA-166 -  20-NA-166 1..3   "To inspect for this concern, add coolant dye to the system, run the engine through warm up, pressurize the cooling system after warming the engine to operating temperature (let the engine cool overnight) and inspect the suspect cylinder with a borescope for coolant dye evidence. At times it may be necessary to remove the head for inspection. If the head casting line is the concern, the intake port will be wet with a coolant oil mix"
    • Can you sample the pooled liquid, enough to confirm it is oil?   ...That its not fuel or coolant.   Also, make sure combustion gases aren't entering the cooling system.   Simply put, either oil being pushed up past the rings (this really isn't possible), oil leaking past the head gasket, oil leaking past the valve, oil entering through the intake air path. If none of this is likely - it may not be oil.   What could be likely is the fuel injector leaking down. A puddle of gas would still smoke and rough idle. (Same cylinder has the same problem after injector replacement?)   What is the crank time first thing in the morning, when the puddle would be present? Does it seem like the high pressure fuel pump needs an extra second or two to rebuild the pressure that injector 8 may have let bleed off? Check the fuel pressure via a scanner prior to starting the engine.    
    • Good information!  I didn't know about the dementia aspect and asked for a general for my second knee. I'd heard that recovery room time is usually shorter with a general.   The anesthesiologist talked me out of it and I had the spinal.  Inconvenience and/or discomfort is a small price to pay for reduced risk!
    • This is for those over 70 years of age contemplating joint replacement surgery involving general anesthesia. Even some 55 yrs. ago when I took my pharmacology class the dangers of developing dementia in the elderly that had general anesthesia were beginning to be recognized. Over the years there has been some refinement in the cautionary warnings, avoid general anesthesia if possible if you've had close to 10 priors, especially over the age of 70 and/or a family history of dementia. I'm not including the twilight anesthesia induced by propofol often used in cytoscopies or colonscopies. Seriously think about seeing a neurologist and undergo cognitive testing before proceeding if any of those criteria apply to you. Spinal anesthesia may be an option in some cases. I'm in the above camp and although I could use a new right knee, I get fidgety according to a prior orthopedic surgeon when the bone saw spools up or maybe it was the smell of saw blade meeting bone, anyhow I may have one general anesthesia left in me which I will pocket for now and I'm choosing mind over mobility, anyway where did I leave my damn cane!
    • We understand your frustrations with your auto start/stop, fuel gauge and cruise control concerns since your latest update, @LarT-26. You mentioned getting repairs completed, however, have your concerns been resolved? If not, we would like to learn more so we may explore the best path of assistance moving forward alongside your local dealership. When you have a moment, please visit: https://s.gmc.com/support-request and complete the request form with all pertinent details. This will help us to better understand your concern and ensure that it is routed correctly. We will keep an eye out for your outreach.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...