Jump to content

Recommended Posts

Posted (edited)

 

Don't know what tires they put on, but it will come back, that I can assure you, it may take a couple hundred miles, but it will come back. I've had the tires replaced on my truck a couple times now, and it always comes back. What size rims do you have, and are they GM rims? the foreman at my shop believes the vibration is worst in the 20" and 22" rims, and occurs due to a lack of support in them. To me that means low quality lol

If thats the case than a set of aftermarket rims should solve all of our problems and you solved the mystery. 614 pages and 1 million 200 thousand views for nothing.

Edited by steelcity
Posted

Yet you're still trolling here?!

Many members have traded in their shakers but that doesn't mean they are trolling. Maybe they just want to see if a REAL solution has been found. They are just giving a suggestion based on their experiences with their current choices.

 

For those members who have traded for another brand, I'm glad you are in a truck that satisfies you and doesn't shake and drive you crazy and make you mad. I'm glad mine went away with a new set of tires or else I'd be in the same boat as y'all.

 

Sincerly,

 

K2 Moderator

 

Sent from my SM-N900V using Tapatalk

  • Like 1
Posted

Yet you're still trolling here?!

It's just amazing to continue to see all the problems that GM cannot seem to get corrected. I was a very long time GM proponent until I bought a 2014 Silverado. I empathize with everyone on here that are fed up with their very expensive pickup.

  • Like 1
Posted

well im putting it out there.....i purchased a loaded silverado sticker was 48k in april of 2015. after 3-4k it shook horribly on the highway! i took it in to my dealer multiple times. they couldn't fix it so i talked to gm and the best they could do is give me a 4500 dollar trade assist. i found a GMC sierra i liked and heard GMC was having less issues with the shaking or vibrations. so i pulled the trigger in fear of me having a much wors problem with the silverado down the road.

 

so my GMC drove nice up until..............3-4k!!!! i now have the same problem on a 50k sticker truck!!!! i have taken it back multiple times and they say my tires are not road forced balanced. so after two weeks and over a dozen tires they finally get it in spec. ride home was fine but after a couple hundred miles it shakes again.

 

all in all ive owned 8 GM pickups. i will not be buying another one...... this is too big a problem for GM to just cast me aside and not care.

buyer beware these trucks have a MAJOR issue and GM DOES not stand behind them!!!!!!

  • Like 1
Posted

My 2016 Z71 Crew Cab has shook from day one. Now has 9K on it. Third trip to dealer and I took service manager for a ride. He seen and felt it and stated my entire passenger side door was shaking also. Speed of 70 mph up. They checked it out and here is what he txt me.

"Ordered a ring and pinion set, found excessive runout causing some tight spots as it spins the ring gear"

They came and got my truck today to rebuild the rear end.

See what happens. I thought I read a while back in this thread that someones truck was fixed by replacing the rear gears.

Is it only Z71's with locking rear differentials shaking?

 

Oh, and when they had it in for diagnostics they put a large scratch in my front bumper..........I understand things can happen but the person who did it has to know they did and it took me to find it. That is upsetting.

 

I tried the spring clamps, in my opinion it did reduce the shaking but did not eliminate it.

Posted

I believe some have reported the ring and pinion to resolve their issue, others have not. And all different models have been reported as vibrators not just Z71, neither of mine were Z71. I had an LTZ and a High Country. Hope it works out for you.

Posted

If thats the case than a set of aftermarket rims should solve all of our problems and you solved the mystery. 614 pages and 1 million 200 thousand views for nothing.

wouldn't that be something lol

Posted

I believe some have reported the ring and pinion to resolve their issue, others have not. And all different models have been reported as vibrators not just Z71, neither of mine were Z71. I had an LTZ and a High Country. Hope it works out for you.

I had a whole rear end, 3 drive shafts, 3 new tires, a set of wheels and tires off another truck on the lot, engine shims, 3x road force balancing the tires I had and they couldn't fix it on my 1st 14.
Posted (edited)

Not to start World War 9878687420 with you now, but look at how JD power started, http://www.jdpower.com/about-us/history they had "clients" in auto manufacturers. I personally don't trust or care what any of the "major" reviewers say. I go by news articles, small time reviewers, and forums. these are the only places you get the real truth. JD Power is bought just like Consumer Reports, BBB, etc.

 

by the way. the JD Power ratings are based on repairs within the first 3 years of a vehicle being manufactured, meaning its older vehicles, not the current new ones. see for yourself http://www.jdpower.com/industry/automotive

 

**EDIT**

sorry that was for their Vehicle Dependability Study (VDS) their Initial Quality Study (IQS) only takes the first 90 days into account... 90 whole days. I don't know about you guys, but 90 days is enough for me to buy a vehicle based on it hahaha. Like I said, JD Power is a joke.

Edited by rdnckhntr94
Posted

Not to start World War 9878687420 with you now, but look at how JD power started, http://www.jdpower.com/about-us/history they had "clients" in auto manufacturers. I personally don't trust or care what any of the "major" reviewers say. I go by news articles, small time reviewers, and forums. these are the only places you get the real truth. JD Power is bought just like Consumer Reports, BBB, etc.

 

by the way. the JD Power ratings are based on repairs within the first 3 years of a vehicle being manufactured, meaning its older vehicles, not the current new ones. see for yourself http://www.jdpower.com/industry/automotive

 

**EDIT**

sorry that was for their Vehicle Dependability Study (VDS) their Initial Quality Study (IQS) only takes the first 90 days into account... 90 whole days. I don't know about you guys, but 90 days is enough for me to buy a vehicle based on it hahaha. Like I said, JD Power is a joke.

Cmon man, that is so ridiculous. Just because you got a lemon doesn't mean the whole brand is down the crapper. Lemons happen these are mass manufactured vehicles and defects will happen, no matter the brand (yes even Toyota and Lexus have lemon).

 

 

Sent from my iPhone using Tapatalk

  • Like 1
Posted

Many members have traded in their shakers but that doesn't mean they are trolling. Maybe they just want to see if a REAL solution has been found. They are just giving a suggestion based on their experiences with their current choices.

 

For those members who have traded for another brand, I'm glad you are in a truck that satisfies you and doesn't shake and drive you crazy and make you mad. I'm glad mine went away with a new set of tires or else I'd be in the same boat as y'all.

 

Sincerly,

 

K2 Moderator

 

Sent from my SM-N900V using Tapatalk

I traded my 2014 Sierra AT in last week for a 2016 Acadia. My dealership is the only reason. I still come on here because I am baffled and want to see if there is a resolution and I have friends that still have a similar truck and are starting to notice the issues even though I never mentioned it to them. Not really fair to call those that got out trolls IMO.

  • Like 1
Posted

I traded my 2014 Sierra AT in last week for a 2016 Acadia. My dealership is the only reason. I still come on here because I am baffled and want to see if there is a resolution and I have friends that still have a similar truck and are starting to notice the issues even though I never mentioned it to them. Not really fair to call those that got out trolls IMO.

Exactly! And glad you're still a member with us, we do have a dedicated crossover section as well on here if you have yet to check it out! Enjoy!

 

Sent from my SM-N900V using Tapatalk

  • Like 1
Posted

What's funny is when we first bought our Dodge Durango back in 1998, dissatisfied owners on a Durango forum where praising the foreign SUVs because they were picked by J.D. Powers or some similar organization (maybe Consumer Reports???).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I am in the market for a bidirectional scan tool so was hoping someone can help point me in the right direction. There are so many options out there it is hard to narrow down which make/model to choose.   I have always done my own vehicle work so looking to maximize capability with the scanner. Ideal price is $1k or less but would be willing to exceed if it opens up significant benefits.  Currently my 24 2500 is the newest vehicle but also have a few mid to late 2010s Subarus as well.    It seems that the Autel MP900 has a decent amount of features at a reasonable price?
    • There was talk over the last couple of years that the contract to build these trucks between GM and International would not be renewed.  International moved production of all their other trucks besides the companion CV model out of the Springfield plant some time ago when they opened their San Antonio plant.  That left Springfield only building the Silverado Medium Duty, International CV Series, and some Express/Savanna long wheelbase cutaways.  International also put the plant up for sale some time ago.  This all answered my earlier question as to why GM and International did nothing with these trucks since they were introduced, as they had basically become a market 'placeholder' with a finite life.    The Silverado Medium Duty/International CV trucks were interesting combination of a GM powertrain, electrical system, and K2XX Silverado cab with an International chassis that was supposedly designed for a step-van type vehicle they never produced.  They were manufactured in International's Springfield plant along with the IH MV series initially.  When first introduced, there was much talk that the Silverado Medium Duty/CV would eventually get a gasoline engine option along with other upgrades and GM and IH would work on a class 6/7 joint venture truck.  This was before VW bought Navistar out, after that happened no more was said.  Draw your own conclusions...   About the time talk started that the GM/IH joint venture was not going to be renewed, rumors started that GM would develop a new line of medium duty trucks themselves.  The story is the new trucks will be part of the next generation HD's due in 2028, and will still feature a 'straight rail' chassis design that the current medium duty has.  GM views this as a desirable feature that differentiates their truck from the competition.  A gasoline engine option is also expected.  As the current Silverado Medium Duty remains in production until September 2026 and there is still a lot of inventory available do not expect any official word for some time.   I believe GM remains committed to their successful partnership with Isuzu, and all the LCF models will still be available from Chevy Commercial dealers.  Isuzu is on the cusp of opening a new large plant in South Carolina and there is also speculation that this may result in new product for both Isuzu and Chevy Commercial dealers.                  
    • drive the truck back to the dealer and complain that the button works.
    • drive the truck back to the dealer and complain that the button works.
    • I have a 2026 2500 HD Ultimate. My phone app says there’s a software update available. It’s something about improved battery management and something to do with the running boards. I follow the instructions for the update but the “Check for Updates” option is greyed out in my settings menu. Has anyone else seen this? How did you resolve it? The help message just says “see your dealer” if the download doesn’t work. I’m just trying to save a trip. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...