Jump to content

Recommended Posts

Posted

Just got mine back today for the 3rd seat issue repair. As soon as I got it in the seat felt much more rigid and tight like it should. So far so good, I'll have to report back after putting some miles on it before I'll say it's 100% fixed but I'm liking how it feels so far.. Fingers crossed..., I'll report back soon....

Posted

I don't care what kind of warranty we have. After too many visits with no permanent fix, the dealers are going to start to turn us away.

  • Like 1
Posted

Got the rocking seat a while back and but the clamps on. Made it feel more solid. Sent the truck to the dealership for the recall and asked them the put the permanent fix on it. They told me they didn't feel it moving. No kidding!

I asked them to put the fix from GM on it without my clamps. I like the dealership, they've treated me fairly but come on. We'll see what happens Monday.

  • Like 1
Posted

I've got over 13k on my Sierra and I've had seat issues from the begining. Now it's just worse. At first, the local GMC dealer said it's normal -- they all do it. Next visit I had been feeling a side to side movement once in a while. They said they just put a clip in another customer's truck and they will order one for me. I am not sure what is going on with the seat. I know the plastic sides rub and squeek on the seat itself because it's too tight all the way around. It rubs on the the center console, too. I hopped in a 2015 Yukon in the showroom and it's the same design with the same issues I am having. The person in charge of those seats at GM should be in an unemployment line with the folks that let that bad ignition switch go in millions of GM vehicles. Poor design. Bet it won't be a problem in next year's models!

Posted

Adjusting my seat didn't have any noticeable affect. It moved at all the positions. I had a 2010 F150 Lariat that had a similar issue. Just not as bad.

I put the clamps on as noted in on this forum. Still pretty solid.

Posted (edited)

Got the rocking seat a while back and but the clamps on. Made it feel more solid. Sent the truck to the dealership for the recall and asked them the put the permanent fix on it. They told me they didn't feel it moving. No kidding!

I asked them to put the fix from GM on it without my clamps. I like the dealership, they've treated me fairly but come on. We'll see what happens Monday.

That sucks levi, you still dealing with Scott @ Hendrick? Same thing happened with my 2500HD, they could never replicate the brake squeak I was having, until the tech rode in the truck with me driving.They had my HC on Saturday for an oil change/tire rotation and 2 recall updates. I will say that they did try to make my 2500 right, they just couldn't ever get it to duplicate the problem.

Edited by galliher_nc
Posted

That sucks levi, you still dealing with Scott @ Hendrick? Same thing happened with my 2500HD, they could never replicate the brake squeak I was having, until the tech rode in the truck with me driving.They had my HC on Saturday for an oil change/tire rotation and 2 recall updates. I will say that they did try to make my 2500 right, they just couldn't ever get it to duplicate the problem.

Yep, Scott's been great to work with. I'm to meet with the tech tomorrow to review the seat concern.

Posted

I just picked up my truck after having the fix for PI1183 applied. The seat felt solid on the short drive from the dealer to my office. Hopefully it is resolved.

Posted

Are these seat issues on the 60/40 bench or on the bucket seats?

 

I'm tall so I have my seat positioned in the full down position and I don't notice any movement but my driver's seat on my 60/40 makes a loud creaking noise every time I get in and out of the truck. This started happening at around 6,000 miles. Standing outside the truck, I can push down on the front left corner and replicate the noise. It's very annoying and sounds cheap.

  • Like 1
Posted

You know if i here one more time " It's normal they all do it " i think im gonna scream!

If the door handles fall off after 200 miles on all gm products does that make it ok because they all do it? I love how the dealer standard answer is the same all over the country . Must have been a telaconfrence and all dealers were required to attend . Todays answer is "It's normal they all do it"

 

Ok rant over :D I feel much better.

 

 

  • Like 1
Posted (edited)

You know if i here one more time " It's normal they all do it " i think im gonna scream!

If the door handles fall off after 200 miles on all gm products does that make it ok because they all do it? I love how the dealer standard answer is the same all over the country . Must have been a telaconfrence and all dealers were required to attend . Todays answer is "It's normal they all do it"

 

Ok rant over :D I feel much better.

 

 

I know how you feel. Its not only our trucks doing this. While "fixing" my seat I was given a 2014 LTZ Impala with a little over 200 miles. Same exact shifting,clunking seat problem. I think our only hope is to wait a year or so till GM changes these seats out and demand a warranty swap. This just does not seem to be a big concern of theirs. I have been dealing with this since July 2013 and on two different 2014 silverados. As a matter of fact I am going to call GM customer support again right now. Good luck.

Edited by scott19677
Posted

I installed the hose clamp fix about 2 months ago and have had zero problems since.. I highly recommend just doing that then dealing with the dealer.

  • Like 1
Posted

Report Receipt Date: JUL 23, 2014
NHTSA Campaign Number: 14V446000

 

SUMMARY:

General Motors LLC (GM) is recalling certain model year 2013-2014 Buick Encore and Cadillac ATS; 2014 Cadillac CTS, ELR, Chevrolet Caprice and SS vehicles; and 2014-2015 Chevrolet Silverado and GMC Sierra Trucks. Due to an incomplete weld on the seat hook bracket assembly, the front seats in the affected vehicles may not stay secured in place during a high load condition such as a crash.

CONSEQUENCE:

A seat that does not stay secured increases the risk of occupant injury in a vehicle crash.

REMEDY:

GM will notify owners, and dealers will inspect the seat hook bracket assembly weld and replace the lower seat track, as necessary, free of charge. The recall is expected to begin in late August 2014. Owners may contact GM customer service at 1-800-521-7300 (Buick), 1-800-458-8006 (Cadillac), 1-800-222-1020 (Chevrolet), and 1-800-462-8782 (GMC). GM's number for this recall is 14340.

Posted

I had this exact fix completed on my seat 2 weeks ago and it's great now.. I'm very happy with this fix. At first they said it was for cadillacs only but still ordered the parts and installed them as listed above. As soon as I got in after the fix it felt like a new seat, much firmer and solid. 2 weeks and 2000km later it still feels great, I think they finally closed the door on this issue.. Now get your truck in too, you'll be happy you did...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • That should answer the maximum depth difference between the stock and the PPE so its not hugely lower. As to the PML pan, they don't make any claims that it fits the L8T with the same transmission and in fact leave their information confusing, however on the surface it says "for Duramax" and so its hard to say. I know a while back and not sure which brand it was that specifically stated that the extra capacity pan that particular company made did NOT fit the gas version. 
    • There are several versions of the 5100's. Some for stock height, some for leveled, some for lifted.    Side note. I finally had a chance to tow with my 30' gooseneck with about 10,000 lbs of material on it this past week. Hands down the 5100's made the trailer towing much more stable and comfortable. I even had 10 cmu blocks in the bed. What a difference over the stock shocks. 
    • According to PML, the stock pan is 4.3" deep - (PML info): Dimensions: at deepest area, PML pan is 7 inches, stock pan is 4.3 inches    PPE is 5.4" so roughly 1.1" deeper than stock
    • I had not realized that PPE has come out with a version of a cast aluminum oil pan specific to being able to fit onto the 10L1000 with the L8T engine sometime this spring. I was doubting that anyone would come out with something beyond what Dorman had in more of a direct factory pan swap. I see from one comment that is on the PPE site that they found the pan to be tighter to install then the factory unit and having to flex the exhaust down to fit it. I didn't lookup any specs if they have any as per how much lower it hangs but as it holds more oil and has fins outside the pan it would no doubt hang a certain amount lower.    I looked back at the site and they do have some depth measurements to get a rough comparison to the factory pan total height or hang down if you will at the front and rear of the pan so that will give a good idea how much further down this pan would end up being for ground clearance issues.    2024-2026 GM 6.6L Gas 10L1000 Heavy-Duty Cast Transmission Pan – Pacific Performance Engineering    
    • I'm in constant amazement over the number of people that do oil maintenance by how they feel, what they were told, what materials cost, what brand A claims vs brand B.     Come to think of it, this behavior isn't exclusive to oil. 🤔 They drive this way too. 😬   There is a 20 plus page thread on BITOG on Mobil 1 Advanced Clean vs Valvoline Restore and Protect it would be amusing if it were not so........humanly pitiful.   Last Sunday we were are sitting at services and listening to a speaker talk about Jesus parable of the wide and narrow gates and he said something that hadn't dawned on me but totally fit the way people in general are about just about everything. He said there are so few people on the narrow path leading to a good reward not because the the narrow gate was hidden or hard to find but because the wide gate leading to a bad end it so darn easy and uncomplicated to follow!!!             
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...