Jump to content

Recommended Posts

Posted
On 9/1/2020 at 12:38 PM, JohnTz said:

Just checked mine. About 1 turn each bolt to tighten. Never had any problems but wanted to be proactive on this. Thanks for the heads up. 

Going to check mine in the morning!  Did you have to disconnect the neg battery terminal or can you just tighten it with a ratchet?

Posted
4 hours ago, Shiva said:

Going to check mine in the morning!  Did you have to disconnect the neg battery terminal or can you just tighten it with a ratchet?

I just tightened them. 

  • 3 weeks later...
Posted

Wow, guys - thanks for posting all of this. The battery in my 2020 Sierra is dead with no explanation but with lots of warning lights and guess what -  because of YOU, I was able to find this and relay the information to the dealer.

 

Why does it have to be me to come to the rescue? Granted, it is not yet fixed - but it sounds exactly like the issue at hand.

 

Yes, this needs to be recall.

Posted

Mine went back to the dealer Monday on a rollback for the second time with this issue. I also informed them of this problem but still have not got my truck back. I also told them I wanted a new battery since this was the second time and this time the battery was drained down to 2 volts.

Posted
21 hours ago, John Bro said:

Wow, guys - thanks for posting all of this. The battery in my 2020 Sierra is dead with no explanation but with lots of warning lights and guess what -  because of YOU, I was able to find this and relay the information to the dealer.

 

Why does it have to be me to come to the rescue? Granted, it is not yet fixed - but it sounds exactly like the issue at hand.

 

Yes, this needs to be recall.

Okay, I just got my vehicle back BUT - the UBEC bolts were already at 53lb. They could not find what drained the battery. And, given what I am reading here, it is just a matter of time before it happens again. This sucks so hard - got a new vehicle because I have no time for such problems right now at all. Like several of you.

 

But will report back with anything further. I plan to drive by there in a couple weeks and have them check the battery.

Posted (edited)

I have a 2020 AT4HD and its now in the shop for the 7th time since March.  This the 4th time the battery has died.  Actually already had an appointment for squealing brakes for the 3rd time (separate post).  I just called them about tightening the fuse box bolts and gave them the service bulletin number.  I had to give them the service bulletin number about the brakes too.  Why are we having to tell GMC mechanics how to do their job.  This is ridiculous.  I expect they will tell me...again....that the battery is fine and there is nothing they found to cause it.  I hope its the bolts....still hoping to get rid of the brake squeal too.  

 

UPDATE:  I picked up my truck yesterday and as I suspected the mechanic said he could not reproduce the squeal on the brakes.  I had showed a video of it to the service tech.  They also said battery tested fine and they could not find the problem.  I showed them the service bulletin reference posted above, but they couldn't find it in their system.  I got home and checked the bolts on the fuse box and mine were one full turn lose as well.  I hope that resolves the issue with the battery.  

Edited by RossEGCA
Posted

because issues that are not very common are not going to be known by all the service departments and there are so many service bulletins out there for all the vehicles that no one memorizes them.  This forum allows for the very few people experiencing the issues you are to come together and ****** and complain and look for help, thus the bulletins come up in conversation and we get to inform the dealer service departments.   The REAL good mechanics will look for TSBs while the others will just shrug their shoulders and say "can't duplicate issue."  or "Issue is normal" 

  • Haha 1
Posted

just tightened my bolts after having electrical issues ... they were all 1/2 turn shy of TSB recommended torque and green indicators were popped ... guessing this was engineering torque miscalculation ... wonder what manufacturer torque specs were ... will see if this addresses issue

Posted (edited)


Hello, all. I found this forum looking for the same issue that happened to me today. i have a 2020 sierra denali with the 6.2. I was slowing at a light and as soon as I came to a full stop the truck jerked and everything went blank. no power to anything. no hazards nothing. it was rush hour and everyone was blasting their horn blah blah blah.. anyway. (oh no onstar since no power) I got the dealer on the line and they came and dropped off a loaner and had the truck towed to their shop but it was late so they will look at it in the AM. I suspect the battery issue too or the ground terminal mentioned in another post but I have only had it 3 days. 200 miles and only 50 of them are mine.. anyway, the tow driver tried to jump it so he could get it out of gear and nothing at first then he used a different jump pack and the lights kicked on but still not enough power to start it, at least he got it out of gear so he could put it on the truck... 

 

Its a lease, I traded my 2017 sierra denali lease in for this. the 2017 never had one issue. I hope I dont have trouble with this thing, I am scared to drive it any distance out of fear it will do it when Im far from home or on the highway.. I had no lights or power brakes, steering no brake lights, no hazards it was completely dead, if that happend at night on a busy road It could have caused an accident.. scary stuff. 

Edited by Joemahma
Posted
10 hours ago, Joemahma said:


Hello, all. I found this forum looking for the same issue that happened to me today. i have a 2020 sierra denali with the 6.2. I was slowing at a light and as soon as I came to a full stop the truck jerked and everything went blank. no power to anything. no hazards nothing. it was rush hour and everyone was blasting their horn blah blah blah.. anyway. (oh no onstar since no power) I got the dealer on the line and they came and dropped off a loaner and had the truck towed to their shop but it was late so they will look at it in the AM. I suspect the battery issue too or the ground terminal mentioned in another post but I have only had it 3 days. 200 miles and only 50 of them are mine.. anyway, the tow driver tried to jump it so he could get it out of gear and nothing at first then he used a different jump pack and the lights kicked on but still not enough power to start it, at least he got it out of gear so he could put it on the truck... 

 

Its a lease, I traded my 2017 sierra denali lease in for this. the 2017 never had one issue. I hope I dont have trouble with this thing, I am scared to drive it any distance out of fear it will do it when Im far from home or on the highway.. I had no lights or power brakes, steering no brake lights, no hazards it was completely dead, if that happend at night on a busy road It could have caused an accident.. scary stuff. 

It's extremely alarming that GM has not had a fix for this issue.  These trucks have been having this issue since they the first one was sold.  I don't have anymore fate in mine.  Every time I drive I keep waiting for something to go wrong to the point where I don't enjoy driving it.

 

I had a 2018 F-150 Platinum Ecoboost with no issues.  Just liked the Denali styling better.  Will drive this until the warranty period is up and probably go back to Ford or see what the new Tundra looks like.

Posted
13 hours ago, Shiva said:

It's extremely alarming that GM has not had a fix for this issue.  These trucks have been having this issue since they the first one was sold.  I don't have anymore fate in mine.  Every time I drive I keep waiting for something to go wrong to the point where I don't enjoy driving it.

 

I had a 2018 F-150 Platinum Ecoboost with no issues.  Just liked the Denali styling better.  Will drive this until the warranty period is up and probably go back to Ford or see what the new Tundra looks like.

Ya I bought a brand new tundra even though its flawless Id love to get this new one. 

Posted

Found this thread after 2020 Silverado 5.3L Trail Boss 7500 miles was totally dead.  Built 01/2020. Took forever to jump it. All the codes tripped. Theft, anti lock brakes, traction control, etc... Drove it home and the engine light stayed on. Started next morning and afternoon with no problem but the check engine light was still on. Parked in my driveway and popped the cover to the fuse box under the hood and found the 4 bolts mentioned in this thread were approximately 3/4 of a turn loose. Tightened them up. The very first start up, the next afternoon, no problem and the check engine light was out! Still took it to the stealer that day and they couldn't duplicate the problem. Cleared the codes, checked battery and connections. All was good. Didn't mention the fuse box bolts just in case they'd void my warranty. Stealer didn't mention they checked the fuse box bolts so they must not be aware of the problem. Thanks to all of you who post and help! Others like me truly appreciate the time you spend sharing your knowledge. Kevin. 

  • 1 month later...
Posted

2020 Trailboss, 6.2L with 7200 miles, owned it 4 months and battery was completely dead overnight. Was able to jumpstart and drive to dealer where they replaced it with a new AC Delco battery. Hopefully, that won't happen again for at least several years....

Posted

2020 Sierra AT4 5000 miles. Today was the second time my truck was completely dead. First time was over night,  battery wasn’t able to be jumped or changed had to get towed to the dealership. They replaced battery and said it was a bad cell. This time the truck was sitting for 3 days, once again completely dead and can’t jump or charge battery enough to even shift from P to N.  Looks like it’s getting towed again tomorrow morning. 

Posted

F me... just joined this club.

 

2020 3.0 totally dead.  3 hours on a charger, not even a light.  Tow guy had the industrial jumper.  Got it in N and hauled it off.

 

can’t wait to hear the BS from service advisor..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • No doubt... But, as someone who doesn't pay for his services, but who has provided a few views/clicks on his Youtube platform, the data around the Mobil oil testing I think does have some value including to "freeloaders" like me.   A lot of what he's doing is likely showing the OE's work in their oil selection, something that many of us had kind of assumed was true all along, a good balance of both excellent protection and efficiency.
    • Lake Speed is drumming up business for his company just by being in the spot-light so he has a vested interest in stoking the 0W-20 fire.  IMO  
    • I knew when I bought my truck that it had off road hill decent or craw control or whatever they call it and rolled my eyes at that but it gets throw on with other options my truck has, I just never had a heads up if the highway speed regular cruise setting had anything to do with the brakes and that took me by surprise. If you've ever been to the top of Pikes Peak and watched those ahead of you on the way down with their brake lights on constantly, one can guess they are probably not gearing down or not enough anyway if their vehicle will allow and a good reason their is a brake check spot part way down where they use an infra red heat gun to check how hot ones brakes are front and rear.    Your right that once one gets out of the front range by Denver and I've not been on that stretch of 285 between Denver and Fairplay myself but I know its high and Fairplay at 10000 feet, Buena Vista at 8000, it drops a bit from there but then your going back up and over the 11000 pass and Durango is at 6500 . So yes your definitely right that 6500 and a lot higher is the theme of going anywhere out in that direction from Denver but hey, the down hill sections give fantastic fuel mileage !.    I don't even look at the fuel pumps for what premium costs here, since I live on a farm and up to this point get fuel delivered I am rarely in front of a fuel pump and when I am, I am often using card lock bulk fuel stations so it tells me what the price is AFTER I buy the fuel. Looking up on gas buddy and converting to US gallons but in Canadian dollars, regular on average of the prices listed was around 5.95 and premium is around 7.00 . That was one reason I did not go for the 6.2 half ton aside from its lack of carrying/towing if one was going by the rule of using premium fuel and until recently one could only buy regular farm gas if playing the few cents off game for farm dyed fuel for a "farm licensed pickup". But yes I hear you on the fuel price difference and like the diesel theme with it often being more expensive then gas it doesn't have quite the charm to it either as it once did although right now here for some reason the price of diesel has come down more so its now inline with the price of regular gas. 
    • I agree with this assessment. As you know I’m testing longevity with vehicles for the first time. I have a few vehicles I passed to kids and grandkids. We’re all past 100K miles some approaching 170K. I’m the only one doing 5k oil changes. The rest whatever the minder says. I’m the only one doing frequent transmission service. My odyssey the trip vehicle at 200K will be finished as a trip vehicle. I recently changed to high mileage oil, Valvoline. I can’t get past the fact that all manufacturers want to claim long service life. I just don’t make sense that they would go with low weight oil for mileage. While sacrificing longevity.
    • There's absolutely a mountain of profit in catering to the "I do my own research" crowd, people who are certain they know better. And I don't mean there isn't data to support that 0w40 produces less wear product than 0w20 in an engine like the 3.0 Duramax, that only feeds them the assurance they need. Again, my whole thing with oil selection is, sure, 0w40 or 0w30 produces less wear product. Are we talking the difference between the engine lasting only 100k versus 200k? Or are we talking more like, if the engine will already go 350k on a good 0w20 regimen recommended by the OE, is using 0w40 going to get us to 355k, assuming we can even get the rest of the truck to last that long, meanwhile sacrificing the first 5y, 100k in powertrain warranty. The answer isn't easy, there are tradeoffs.   I willfully use 0w20 Dexos D for this reason, knowing that a 0w40 will produce slightly less wear. I don't believe the delta in wear product is meaningful over the lifetime of the engine, and I place much more importance on driving style and overall feeding and care of the engine as a whole. It's the mentality that someone can abstain from alcohol their whole life which is an amazing boost to health by itself, theoretically. But if they're sedentary, that lifestyle choice will most likely kill them young despite their other, concerted efforts. Maybe someone doesn't drink AND they are the perfect picture of health and activity AND they use 0w40 AND they treat their engine perfectly. If living until 130 years is the goal, sure, do that. But it's going to be a really old truck falling apart around a good engine for that last 30 years, without a doubt.   I watched Demonworks' other video on the 100k+ 3.0 Duramax that had dealer 0w20 changes on what appears to be OLM-prescribed intervals (8-10k).   The QR codes are still present and readable on the main bearings. That's how little wear it has.   That's not proof that anyone else should stick to 0w20, but it's confirmation, for me, that 0w20 is perfectly acceptable to use in these engines.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...