Jump to content

Recommended Posts

Posted

From what I'm told GM has specified higher tolerances at least for the tires. In my case the dealer is saying my trucks vibration is due to the tires. A road force balance showed my tires needed 30lbs force to fix but apparently the tighter spec for our truck is around 20lbs. The result is my truck still vibrates supposedly due to this. I'm at the well you say it vibrates due to tires so I want them replaced and they say won't replace because tires are within the tire manufacturers spec.

That doesn't make any sense. If the tires are not within the vehicle spec then how can they pass that off as okay? I would try a different dealer if you can honestly
Posted

If I recall correctly, they lowered the maximum acceptable road force variation on the tires from 30 lbs to 15 lbs.

Posted

Can we conclude that given the stiff frames and body mounts that GM has designed for these trucks for good handling, one must specify tighter tolerances and precision balancing on many rotating parts in order to keep vibrations to an acceptable level? And this includes high quality hubs, brake rotors, wheel, and tires.

I would say that is a accurate statement.

 

 

 

Sent from my iPhone using Tapatalk

Posted

I have had my truck for a year and have 20k miles on it and im starting to feel a slight vibration in the steering wheel is this what y'all are talking about or do you thing it is just the tires

Posted

That doesn't make any sense. If the tires are not within the vehicle spec then how can they pass that off as okay? I would try a different dealer if you can honestly

I am kinda dumbfounded by their statement also. I basically said if they didn't go after the tire manufacturer, give me your test data and required specs and I will. I believe my request has my dealer working with GM tech on this, at least that's what I'm being told. Sad thing is this is a set of winter tires (Firestone 17") I purchased from the dealer. If this gets resolved I will likely have to go through this all in the spring with the regular wheels and tires (Bridgstone 22"). But on a positive note, today I was assured the new rear end definitely fixed my truck because it worked on another truck they did at the same time. The other truck didn't need tires replaced but mine does so it will be fixed. I was born yesterday apparently.

Posted

I have had my truck for a year and have 20k miles on it and im starting to feel a slight vibration in the steering wheel is this what y'all are talking about or do you thing it is just the tires

It could be just the tires in your case. Perfectly normal for tires to require rebalancing after 20k miles.

Posted

I am saying this right now, we are forced to buy tires from the dealerships.

 

GM will not stand behind tires bought elsewhere... I bought BF Goodrich (local tire shop) that Roadforce at between 10 to 20 pounds in the set. GM wont do anything for the 2 tires above 15 pounds. Guess what? Tire shop wont do anything because the manufacturer spec is 30 pounds.

 

At some point, Goodyear is going to tell GM ---- Go **** yourselves, the spec is 30 pounds! Fix your damn truck.

 

By the way, I had all tires Road forced 4 weeks ago, the Pico showed improvement and it felt great.

The feeling lasted about 3 weeks and now I am starting to feel it again.

 

I also have started hearing what sounds like a thud / bottoming out when hitting bumps with right front tire. The noise is heard when the shock expands. Anytime the shock has excess unexpected travel, I hear it.

 

I still believe it to be a bad shock or shocks in the front

Posted

I lemoned it over other issues.

It would occasionally lock out on the 2-3 shift at high rpm. My clutch wouldn't return a couple times as well. Other than that it wasn't bad. Would definitely get an auto if you were gonna run boost though.

 

Yeah, I have a '98 Mustang Cobra, the stock 5 speed (Cobra's of that era ONLY came with 5 speed) is total crap. It is rated at 330 ft-lbs, and the stock engine is 305 ft-lbs. Not much margin.

I replaced it with a Tremec TKO, which required only a few mods. This was minor compared to all the other mods I have in it. :happysad:

Posted (edited)

Everyone please read these articles and email the editors so we can get some attention on our trucks. There is a gentleman named Daryl on the Facebook group that got the ball rolling. It's up to us to get attention on the trucks as well. Again please I'm begging everyone to do this. The SUV already has national attention!!!!!

 

I've even attached each editors email address (couldn't find the one for autoblog still working on it and will update when I get it).

 

Cbs freelance writer email address

[email protected].

 

Also if you're not a member of the Facebook group go join.

 

https://www.facebook.com/groups/GMissues/

 

 

 

 

 

 

Contact Stephen Elmer for autoguide

 

http://www.trucktrend.com/news/1512-bad-vibrations-owners-reporting-strange-harmonics-in-gm-fullsize-suvs/#.Vov4DmakiZ8.mailto

 

[email protected]

 

http://www.autoblog.com/2015/12/30/fullsize-gm-suvs-making-owners-sick-report/

 

 

 

 

http://www.usatoday.com/story/money/cars/2015/12/31/gm-vibration-complaints/78119904/

 

[email protected]

Edited by sideoftheroad
Posted

Wish I would have seen this the other day. I just bought a 2014 GMC Sierra 3500HD Allison/ duramax with 33,000 miles on it. It was snowing the day I bought it and the truck drove fine so I thought. I couldn't get much over 50 as it was icy as hell and snowing on the test drive. Its going to the dealer tomorrow. It feels like there is a problem in the left front cv shaft or something and sounds like hell now! I have vibration around 60 to 70 but it makes a lot of noise at 25mph and up. I just spent the last 2 days reading this whole forum and it sounds like either pinion/gear, torque converter or driveline..... Very disappointed I bought it now that I read this forum.

Posted

Wish me luck...dropped mine off this morning for visit #5. Giving them this one last try at it

  • Like 1
Posted

I have a 2015 gmc z71 with a shake at 65-80 mph. Also oil leaking from transmission. 25000 miles. At dealership now!

Posted

Mines at the dealer today for the over 70 shake. The service writer told me it was tires when I called to make my appt. I don't see this going in my favor.

Posted

I will be pissed if they tell me tires! I have Toyo Open Country All Terrains on and they ride like glass and grip like tape! Tires are not the problem in my opinion!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Hello hello looking forward to expanding my knowledge of the 2026 2500 HD that I just bought.   Truck has 3500 miles on it four-wheel-drive crew cab and I’m about to put a 6 1/2 inch BDS lift on it 18 x 10 -25 offset with 37’s   Already have the wheels and tires just waiting on the lift install in about three weeks   Question what surprises am I not gonna be happy with?  I’m not new to lifted trucks so I know that acceleration towing gas mileage all that is affected..   Question is those of you that have this truck this powertrain with a 10 speed Allison and have done the mods that I’m doing,,, how bad is it? Is that Allison constantly gonna be hunting for the right gear to go into? And what about towing, acceleration, fuel consumption as mentioned?    Lastly how come I can’t find any ring pinion gear set up for these axles and when could I expect to see them?   I apologize if there’s any typos I’m doing speech to text on my iPhone.    
    • I've got a 2013 2500 6.0L Flexfuel. Drove the truck earlier today with no issues. Went to run an errand tonight and noticed key fob wouldn't work. Figured battery was dead, so replaced fob batter. Still wasn't working. Grabbed my other set of keys with the other fob and that one wasn't working either. So I manually unlock truck and insert key. Interior lights come on, dashboard lights up, turn key and truck starts. Turn truck off, like a moron, and try starting again. This time no crank, no click, no nothing. Lights still come on and dash lights up, but now I'm getting a service 4wheel drive, service tire monitor, etc. Check voltage on battery and Im showing 12.2v. Throw my battery charger on it and give it 15 mins and try starting again. But still no crank no start. Decide maybe its a bad battery, run to autozone grab a new one and put it in. Same issue. Disconnect battery and let it sit for 15 mins. Try again and still nothing. I had managed to roll the windows down earlier as its a humid night, but now I can't get them to roll up. Power locks are also not working now. Then randomly I try the key again, and it fires right up. Immediately I roll up the windows as we have nothing but rain forecast this week. I shut it back off wait 30 seconds and start up again. Worked a 2nd time. So turn it off, start putting things back together. Try one more time, and back to no crank no start. And now the car alarm starts going off. Had to disconnect battery and leave it that way for the night as I don't think my neighbors would appreciate my alarm going off again tonight. Any thoughts or help would be appreciated. 
    • No one will care for you like you care for you. Do what you can for as long as you can. IMHO of course. 
    • How about them NICKS!!! 
    • Hi there.  Long time lurker, first post.    i have read the previous posts regarding the water ingress problem with this emblem.  I bought my 1500 SLT the  summer of 2025 new and after reading the MANY problems with these emblems failing I decided to install one anyways.  As per a YouTube video, I sealed ( or tried to) this sign with silicone sealant around the outer perimeter joint and the holes that were already somewhat sealed on the rear plate of the emblem.  And installed the connector assembly using dielectric grease on the connectors. The installation looked great and worked well for about 4 months……then FAILURE.  Grrrrrr…… I live in the great white north and wash my truck weekly in an automatic car wash  to keep the salt off.  Let me tell you that removing the old, failed emblem is a whole different animal than removing the OEM individual letters without removing the grill assembly. Mainly because the illuminated logo is built differently than the original letters which  you can remove the red surface lettering with a knife or some kind of blade which gives access to the tabs which hold the logo onto the grill. So I had to essentially destroyed the old emblem to remove it. Doing so killed my chance of doing somekind of autopsy on the failed , old logo.  But there was plenty of water inside when I ripped it apart.  Prior to installing the new assembly I tried it with the old harness and it works fine.   Does anyone have any insight as to where the water is getting into this emblem? I intend to seal the new logo with slow curing epoxy this time around using a syringe.  I think this newer emblem may be an updated unit which I hope GM got the vendor to fix. It has an October 2025 date on it.    If this one  fails,  I am just going to revert back to the non-illuminated letters….AFTER PULLING THE GRILL.    Any thoughts on sealing with epoxy would be appreciated. Thx!   Doug  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...