Jump to content

Recommended Posts

Posted

Well add me to the list I guess. Just bought a 16 crewcab Z71 LT on Friday and had vibes on the highway on the drive home. Brought it back next day, they did RFB and tire rotation. Didn't help much.

 

So picked it up today, after 3 hours in the shop. Was told it drives 100 times better now. I asked what the problem was, turns out that 3 of the tires were about 5 psi too high. That's actually what they told me. That the over inflation "made me feel every bump in the road" and that the Z71 package is stiffer. I guess the Z71 also has the drink mixing feature as well.

 

At any rate I am going to get documentation of the first two visits and take the tech out for a ride tomorrow. Wish me luck.

 

Get out of the deal immediately if you're still able to.

  • Like 1
Posted

Going to ask about it tomorrow, but GA has no "cooling off period". Once you sign, its yours.

Posted (edited)

Well, redid road force, found two bad tires. Replaced tires. No change. Now service manager is opening a case with GM 4 days after I bought the truck.

 

Hoping to talk with the manager tomorrow. Very disappointing experience, from gorgeous new truck high, to disappointment in 2 days.

Edited by Chrismal
Posted (edited)

Well, redid road force, found two bad tires. Replaced tires. No change. Now service manager is opening a case with GM 4 days after I bought the truck.

 

Hoping to talk with the manager tomorrow. Very disappointing experience, from gorgeous new truck high, to disappointment in 2 days.

That really stinks man, especially since it's so new. Your new car high probably didn't even wear off when the problem started. I'm sure your dealer will take care of you. Ding them on the survey they will send you if they don't take care of you.

 

 

Sent from my iPhone using Tapatalk

Edited by dave07
Posted

No, I literally drove off the lot to home 18 miles, and back to the dealer the next morning. The truck had 14 miles when I signed and was at 51 miles when I dropped it off to start the process.

Posted

Well, redid road force, found two bad tires. Replaced tires. No change. Now service manager is opening a case with GM 4 days after I bought the truck.

 

Hoping to talk with the manager tomorrow. Very disappointing experience, from gorgeous new truck high, to disappointment in 2 days.

Make sure their balance machine is calibrated.

 

Sent from my SM-G930R4 using Tapatalk

Posted (edited)

 

Get out of the deal immediately if you're still able to.

I drove 3 - 2015's a few months back and they all vibrated and had extremely rough idle. Also, 2 of the 3 tranny's clunked. Last week I drove 4 - 2016 GMC's. 3 of 4 vibrated and all 4x4's clunked, the 4x2 did not. I wouldn't touch a Chevy if you paid me. And I'm a Chevy guy, my last truck was a 2000 4x4 lifted that lasted me 13 years and I never had a single problem. Damn I kick myself for selling that truck. If I had only known of GM's problems.

 

It shouldn't be a crap shoot to buy a 50K truck. I just lemon-ed my 2014 RAM 1500 Limited that had a defective transmission that clunked every time I stopped. Chrysler said they designed the 8-speed to flare out and clunk. They refused to fix it. I lost 20K on that truck even with the money FCA gave me. That RAM was the biggest piece of crap I every owned besides the 99 Jeep Grand Cherokee I bought my wife. I had so many repairs on that truck, I had 2 folders full of repair bills and the truck was 1.5 years old with 20K miles. Think twice before you buy a Chrysler. No more Chrysler junk for me.

 

I'm off to get a Tundra tomorrow. They might be older technology but they are safe, well built, hold their value and are extremely reliable.

Edited by chevyloco
  • Like 2
Posted

If thats the case than a set of aftermarket rims should solve all of our problems and you solved the mystery. 614 pages and 1 million 200 thousand views for nothing.

In my particular case it seams to have helped. I went through several OEM tires/wheels and nothing changed. I now have 11,000 miles, 4, 000 with aftermarket wheels/tires and the vibration is much better. Still there in the morning for a couple minutes, but it smooths out for the most part. I get ocasional intermittent vibrations still, but not enough to bother me.

Posted

Unfortunately, my truck has started to vibrate between 40-70 mph. Its the worst at 55-62. And I feel like its in the center of the vehicle towards the back. Could be something in the driveline. But I have no idea. Just under 40,000 miles.

 

At first I thought it was my BFG ko2's so I had my tire shop re balance them twice. They assure me the tires are balanced perfectly.

 

Not sure what to do now. It could be u-joints, driveshaft out of balance, rear diff bearings....ugh.

Posted

Unfortunately, my truck has started to vibrate between 40-70 mph. Its the worst at 55-62. And I feel like its in the center of the vehicle towards the back. Could be something in the driveline. But I have no idea. Just under 40,000 miles.

 

At first I thought it was my BFG ko2's so I had my tire shop re balance them twice. They assure me the tires are balanced perfectly.

 

Not sure what to do now. It could be u-joints, driveshaft out of balance, rear diff bearings....ugh.

Welcome to the club.... good luck.

Posted

I washed my vibrator today. You know when you wash your car it seems to drive better? Not mine. Conclusion: riding a clean or dirty vibrator, the stink remains the same

  • Like 2
Posted

I drove 3 - 2015's a few months back and they all vibrated and had extremely rough idle. Also, 2 of the 3 tranny's clunked. Last week I drove 4 - 2016 GMC's. 3 of 4 vibrated and all 4x4's clunked, the 4x2 did not. I wouldn't touch a Chevy if you paid me. And I'm a Chevy guy, my last truck was a 2000 4x4 lifted that lasted me 13 years and I never had a single problem. Damn I kick myself for selling that truck. If I had only known of GM's problems.

 

It shouldn't be a crap shoot to buy a 50K truck. I just lemon-ed my 2014 RAM 1500 Limited that had a defective transmission that clunked every time I stopped. Chrysler said they designed the 8-speed to flare out and clunk. They refused to fix it. I lost 20K on that truck even with the money FCA gave me. That RAM was the biggest piece of crap I every owned besides the 99 Jeep Grand Cherokee I bought my wife. I had so many repairs on that truck, I had 2 folders full of repair bills and the truck was 1.5 years old with 20K miles. Think twice before you buy a Chrysler. No more Chrysler junk for me.

 

I'm off to get a Tundra tomorrow. They might be older technology but they are safe, well built, hold their value and are extremely reliable.

Good luck.

 

Sent from my SM-G930R4 using Tapatalk

Posted

I washed my vibrator today. You know when you wash your car it seems to drive better? Not mine. Conclusion: riding a clean or dirty vibrator, the stink remains the same

They always ride better clean.

Posted

 

I'm off to get a Tundra tomorrow. They might be older technology but they are safe, well built, hold their value and are extremely reliable.

 

Says who? Go visit Tundra Forums and you'll see they have plenty of issues and their fair share of people who are threatening to dump their T-ERDs to go buy a Ford or a Ram or a Chevy!

  • Like 1
Posted (edited)

Are you a member of many Tundra forums ? I am and I don't see much complaining at all. The vast majority of threads are about having fun with their trucks.

Edited by C6Bill
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Hi friends - first time poster. I have a 2015 sierra Denali with 150k miles, I’m the second owner and she’s given me 75k of great service. I run a pulse AFM disable device. Starting Thursday when I exited the freeway after a short local ride it started idling rough, with an obvious misfire shake and was down on low end power.  I got it home and hooked it up to my scannner and found no codes but in live data a pretty bad misfire on cylinder 5. I replaced the coil, plug and wire with all new OE replacements (Delphi gn10165 coil, acdelco wire and 41-168 plug). It’s still behaving the same way after firing the parts cannon at it.   I know cyl 5 is a non AFM cylinder so I am not thinking this is AFM related but I’m kinda at a loss. injector? Bent pushrod? It’s running too well over 1k rpm to suggest those IMO. Has anyone chase this issue before and what was it? Any suggestions? 
    • 2017 Silverado L83 5.3l 6speed transmission Hello, not a new member but havent posted in a while and my old signup info isnt working so had to create a new account. anyways, I have an issue with my truck and hope someone can spread some light on whats happening: -when it goes to 4cyl mode it makes a clunk sound (but not when coasting or going downhill) -when in 4 cyl mode and under load it makes a load pulsating sound (not a tick). -goes away completely when in M5 gear or when plugging in an AFM delete. Im guessing it is one of 2 things but im not convinced of either to be honest. 1. lifter stuck in v8 mode 2. torque converter shudder realistically it doesn't seem like the TC as there is no physical vibration , and it never happens in v8 mode. but maybe? and wouldnt a lifter make a sound whether with load or not? any ideas let me know please. thank you!  
    • Which has made me wonder with the various engine failures of a few brands in the last few years, is it sub par materials such as lifters etc causing failures, or bearing clearances on the crank etc or perhaps bad designing of an engine physically or causing too much load on the components due to the hp/torque they can push out of them. Or is the oil viscosity and additive package of current oils or a lack of oil flow by an oil pump not able to supply sufficient oil at idle or under high load at low rpm. Or is it every item I listed that combined together has pushed the limits so far to the left that there is hardly a margin of safety left and add in some fuel dilution and too long of an OCI and premature engine failure is the result ?. 
    • He is not saying that an SAE *W20 will have more viscosity than a *W40 due to MORE VII polymers. He is saying that although multiple *W40 may post in the PDS the same or similar 100 C and 150 C viscosities that the blenders choice of modifier TYPE and AMOUNT to get his chosen base to grade will not give identical real world viscosities in shear and at temperature. All will pass the SII test but not all will pass the 100 C HTHS (unpublished value) testing the blender does and relies on to get the required by law "percentage improvement' referenced to his last great work.    Tis the problem with the lie. Once told others are required to support it. 
    • I have a `25, 1500 that auto sets on incline. Never knew that at first. I have the electronic shifter. Just think if it didn`t do that? Unlike a mechanical shift that you can muscle out of park, how would you get this thing out? That would be a problem.   What I found out later is, I don`t have to push the button to release. Just put it in gear.   Setting parameters? Don`t know if it`s possible.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...